You are successfully logged out of your my randstad account

You have successfully deleted your account

36 jobs found in Concord, Ontario - Page 2

filter4
clear all
page 2
    • ottawa, ontario
    • contract
    Are you a skilled Industrial Engineer?Do you work with Catia?Would joining a large multinational organization be appealing?If so, this could be the opportunity for you!We are looking for a candidate skilled in Catia to do Engineering Drawings / Requests, and Notifications, and has made those Engineering Drawings so that manufacturing teams can run with them.This position is responsible for creating, maintaining, and improving the industrial processes and tools used by the production team. Among the process and tools are: PBoM, Process sheets, routings, Apsys boards & procedure, hand tools, tooling, jigs, fixtures, and various equipment. The industrial engineer uses traditional industrial engineering skills and tools such as: time study, root cause analysis, MS Office, Engineering drawing Software.Will work a day shift but should have some flexibility if required.AdvantagesPosition will be a 6 month contract with opportunity to be long term.International, well-respected manufacturing company in a growing industry.ResponsibilitiesJOB RESPONSIBILITIES1. Create and update the processes for the line2. Give a technical assistance to the EPU, building on the visual management (APSYS table, EPU meetings…)3. Analyze the Non Conformity Reports (NCR) on the curative and preventive point of view4. Create the repair processes5. Balance the activities of the line using the task sequences6. Update the Bill Of Material (BOM) if necessary for the good progress of the line7. Define and update the method time for each operation of the line8. If needed make Chrono analyses of the time in the line9. Develop or be involved in action that have for objective to reduce the cost or delay, or improve the quality or safety10. Improve the working station in terms of Ergonomics and Safety11. Be part of the First Article Reviews: FAR and FAI12. Create some degrade modes (temporary change of the process)13. All other duties requested by manager or supervisorQualificationsBachelor’s in engineering or College diploma in applied sciences for manufacturing environments2 + years Experience in manufacturing methods process definition Mechanical and ElectricalElectromechanical education capable and experienced on:Define and design shop toolsDefine assembly process for technicians to perform retrofit workDefine electrical cable routing, crimping processesCreate Job Hazard Analysis and Risk assessmentsDefine and implement controls to eliminate residual risks from risk assessmentsDraw a layout in AutoCAD or CATIA for workstation definitionExperience in Lock out and tag out, Overhead catenary system, train vehiclesEffective verbal and written communication with peers and managementMicrosoft Office experience, SAP and other ERP systems is desirableLean manufacturing experience for Waste reductionSummaryApply Online or email resume to Swapna at swapna.nair@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Are you a skilled Industrial Engineer?Do you work with Catia?Would joining a large multinational organization be appealing?If so, this could be the opportunity for you!We are looking for a candidate skilled in Catia to do Engineering Drawings / Requests, and Notifications, and has made those Engineering Drawings so that manufacturing teams can run with them.This position is responsible for creating, maintaining, and improving the industrial processes and tools used by the production team. Among the process and tools are: PBoM, Process sheets, routings, Apsys boards & procedure, hand tools, tooling, jigs, fixtures, and various equipment. The industrial engineer uses traditional industrial engineering skills and tools such as: time study, root cause analysis, MS Office, Engineering drawing Software.Will work a day shift but should have some flexibility if required.AdvantagesPosition will be a 6 month contract with opportunity to be long term.International, well-respected manufacturing company in a growing industry.ResponsibilitiesJOB RESPONSIBILITIES1. Create and update the processes for the line2. Give a technical assistance to the EPU, building on the visual management (APSYS table, EPU meetings…)3. Analyze the Non Conformity Reports (NCR) on the curative and preventive point of view4. Create the repair processes5. Balance the activities of the line using the task sequences6. Update the Bill Of Material (BOM) if necessary for the good progress of the line7. Define and update the method time for each operation of the line8. If needed make Chrono analyses of the time in the line9. Develop or be involved in action that have for objective to reduce the cost or delay, or improve the quality or safety10. Improve the working station in terms of Ergonomics and Safety11. Be part of the First Article Reviews: FAR and FAI12. Create some degrade modes (temporary change of the process)13. All other duties requested by manager or supervisorQualificationsBachelor’s in engineering or College diploma in applied sciences for manufacturing environments2 + years Experience in manufacturing methods process definition Mechanical and ElectricalElectromechanical education capable and experienced on:Define and design shop toolsDefine assembly process for technicians to perform retrofit workDefine electrical cable routing, crimping processesCreate Job Hazard Analysis and Risk assessmentsDefine and implement controls to eliminate residual risks from risk assessmentsDraw a layout in AutoCAD or CATIA for workstation definitionExperience in Lock out and tag out, Overhead catenary system, train vehiclesEffective verbal and written communication with peers and managementMicrosoft Office experience, SAP and other ERP systems is desirableLean manufacturing experience for Waste reductionSummaryApply Online or email resume to Swapna at swapna.nair@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • north york, ontario
    • contract
    General Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesSkills •Demonstrate specialized expertise and knowledge in the assigned field •Plan and organize activities / projects to meet section and organizational goals •Apply analytical skills •Understand and apply relevant laws and regulations •Identify and minimize risk of Health and Safety issues •Communicate in a variety of mediums •Use office technology, software and applications ResponsibilitiesGeneral Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience General Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca Please send your resume in confidence to paul.dusome@randstad.ca QualificationsMust be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.SummaryGeneral Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    General Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesSkills •Demonstrate specialized expertise and knowledge in the assigned field •Plan and organize activities / projects to meet section and organizational goals •Apply analytical skills •Understand and apply relevant laws and regulations •Identify and minimize risk of Health and Safety issues •Communicate in a variety of mediums •Use office technology, software and applications ResponsibilitiesGeneral Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience General Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca Please send your resume in confidence to paul.dusome@randstad.ca QualificationsMust be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.SummaryGeneral Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • north york, ontario
    • contract
    Duties & Responsibilities:Risk Monitoring: - Support the upkeep, sustainment and improvement of EGI Hazard and Risk Register. - Support the transition of risk information to new database. Risk Assessment Support: - Apply fit for purpose risk assessment methodologies to identify and evaluate operational risks.- Support the creation of risk communications. Conduct value assessments (risk and benefit analysis).Risk Monitoring & Communication: - Support risk monitoring and reporting activities. - Assist with the preparation of risk reports for use by management. - Interpret risk results to technical and non-technical audiences.MUST HAVE qualifications:• Undergraduate degree in Engineering, Science, or equivalent.NICE TO HAVE qualifications:• P.Eng; Experience or formal education in risk management and/or project management; relevant industry experience of conducting and managing risk assessments; •Experience in data analysis, statistical analysis.Working Conditions:• Travel expected to be minimal/no on call.• Currently working remotely, with expectation to be back onsite once covid restrictions are lifted, per provincial guidelines.• Expectation is for resource to be onsite at one of the Enbridge offices noted above.Please send your resume in confidence to paul.dusome@randstad.caAdvantages• P.Eng; Experience or formal education in risk management and/or project management; relevant industry experience of conducting and managing risk assessments; •Experience in data analysis, statistical analysis.ResponsibilitiesDuties & Responsibilities:Risk Monitoring: - Support the upkeep, sustainment and improvement of EGI Hazard and Risk Register. - Support the transition of risk information to new database. Risk Assessment Support: - Apply fit for purpose risk assessment methodologies to identify and evaluate operational risks.- Support the creation of risk communications. Conduct value assessments (risk and benefit analysis).Risk Monitoring & Communication: - Support risk monitoring and reporting activities. - Assist with the preparation of risk reports for use by management. - Interpret risk results to technical and non-technical audiences.MUST HAVE qualifications:• Undergraduate degree in Engineering, Science, or equivalent.NICE TO HAVE qualifications:• P.Eng; Experience or formal education in risk management and/or project management; relevant industry experience of conducting and managing risk assessments; •Experience in data analysis, statistical analysis.Working Conditions:• Travel expected to be minimal/no on call.• Currently working remotely, with expectation to be back onsite once covid restrictions are lifted, per provincial guidelines.• Expectation is for resource to be onsite at one of the Enbridge offices noted above.Please send your resume in confidence to paul.dusome@randstad.caQualificationsMechanical or Chemical Engineering DegreeP.Eng Interpret risk results to technical and non-technical audiences.SummaryDuties & Responsibilities:Risk Monitoring: - Support the upkeep, sustainment and improvement of EGI Hazard and Risk Register. - Support the transition of risk information to new database. Risk Assessment Support: - Apply fit for purpose risk assessment methodologies to identify and evaluate operational risks.- Support the creation of risk communications. Conduct value assessments (risk and benefit analysis).Risk Monitoring & Communication: - Support risk monitoring and reporting activities. - Assist with the preparation of risk reports for use by management. - Interpret risk results to technical and non-technical audiences.MUST HAVE qualifications:• Undergraduate degree in Engineering, Science, or equivalent.NICE TO HAVE qualifications:• P.Eng; Experience or formal education in risk management and/or project management; relevant industry experience of conducting and managing risk assessments; •Experience in data analysis, statistical analysis.Working Conditions:• Travel expected to be minimal/no on call.• Currently working remotely, with expectation to be back onsite once covid restrictions are lifted, per provincial guidelines.• Expectation is for resource to be onsite at one of the Enbridge offices noted above.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Duties & Responsibilities:Risk Monitoring: - Support the upkeep, sustainment and improvement of EGI Hazard and Risk Register. - Support the transition of risk information to new database. Risk Assessment Support: - Apply fit for purpose risk assessment methodologies to identify and evaluate operational risks.- Support the creation of risk communications. Conduct value assessments (risk and benefit analysis).Risk Monitoring & Communication: - Support risk monitoring and reporting activities. - Assist with the preparation of risk reports for use by management. - Interpret risk results to technical and non-technical audiences.MUST HAVE qualifications:• Undergraduate degree in Engineering, Science, or equivalent.NICE TO HAVE qualifications:• P.Eng; Experience or formal education in risk management and/or project management; relevant industry experience of conducting and managing risk assessments; •Experience in data analysis, statistical analysis.Working Conditions:• Travel expected to be minimal/no on call.• Currently working remotely, with expectation to be back onsite once covid restrictions are lifted, per provincial guidelines.• Expectation is for resource to be onsite at one of the Enbridge offices noted above.Please send your resume in confidence to paul.dusome@randstad.caAdvantages• P.Eng; Experience or formal education in risk management and/or project management; relevant industry experience of conducting and managing risk assessments; •Experience in data analysis, statistical analysis.ResponsibilitiesDuties & Responsibilities:Risk Monitoring: - Support the upkeep, sustainment and improvement of EGI Hazard and Risk Register. - Support the transition of risk information to new database. Risk Assessment Support: - Apply fit for purpose risk assessment methodologies to identify and evaluate operational risks.- Support the creation of risk communications. Conduct value assessments (risk and benefit analysis).Risk Monitoring & Communication: - Support risk monitoring and reporting activities. - Assist with the preparation of risk reports for use by management. - Interpret risk results to technical and non-technical audiences.MUST HAVE qualifications:• Undergraduate degree in Engineering, Science, or equivalent.NICE TO HAVE qualifications:• P.Eng; Experience or formal education in risk management and/or project management; relevant industry experience of conducting and managing risk assessments; •Experience in data analysis, statistical analysis.Working Conditions:• Travel expected to be minimal/no on call.• Currently working remotely, with expectation to be back onsite once covid restrictions are lifted, per provincial guidelines.• Expectation is for resource to be onsite at one of the Enbridge offices noted above.Please send your resume in confidence to paul.dusome@randstad.caQualificationsMechanical or Chemical Engineering DegreeP.Eng Interpret risk results to technical and non-technical audiences.SummaryDuties & Responsibilities:Risk Monitoring: - Support the upkeep, sustainment and improvement of EGI Hazard and Risk Register. - Support the transition of risk information to new database. Risk Assessment Support: - Apply fit for purpose risk assessment methodologies to identify and evaluate operational risks.- Support the creation of risk communications. Conduct value assessments (risk and benefit analysis).Risk Monitoring & Communication: - Support risk monitoring and reporting activities. - Assist with the preparation of risk reports for use by management. - Interpret risk results to technical and non-technical audiences.MUST HAVE qualifications:• Undergraduate degree in Engineering, Science, or equivalent.NICE TO HAVE qualifications:• P.Eng; Experience or formal education in risk management and/or project management; relevant industry experience of conducting and managing risk assessments; •Experience in data analysis, statistical analysis.Working Conditions:• Travel expected to be minimal/no on call.• Currently working remotely, with expectation to be back onsite once covid restrictions are lifted, per provincial guidelines.• Expectation is for resource to be onsite at one of the Enbridge offices noted above.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • ottawa, ontario
    • contract
    Under the supervision of the Clinical Lab Lead Hand; the Finishes Goods Quality Control Laboratory Technician is responsible for: Duties and Responsibilities•Testing of cards •Testing of Readers •Testing of Capillary tubes•Routine performance checks including Adaptive Process Control, linearity, lifetimes, and validations •Assistance with testing requirements for Process Engineering, Test Engineering and R&D experimentsAssisting in routine upkeep and operational tasks related to the Clinical Lab AdvantagesKey tasks and activities will be completed with guidance and supervision from a higher-level technician or team leader:•Testing for various purposes (using written instructions) of card lots/readers/capillary tubes coming from the assembly departments. •Carries out routine maintenance and basic troubleshooting of clinical lab testing equipment and records these activities in maintenance logs with assistance and guidance form a higher-level technician.•Ability to track inventory of clinical lab supplies and replace what is in house and communicate to responsible personnel reorder points.•Participates in testing process and equipment improvement efforts, including experimental testing. Maintains appropriate records for testing.Percent of TimeFrequencyActivity50DailyProduction card Lot, Reader and Capillary tube testing, Analysis45DailyExperimental Lot Testing5Daily / WeeklyTest Equipment Maintenance / PhlebotomyResponsibilitiesDemands•Routine, detailed nature of testing•Flexibility required for varied nature of testing•Regular and reoccurring exposure to blood from screened donors•Flexibility with adjusting work hours to follow up with overnight shifts as scheduled•Attention to detail is vital•Proven ability to work and communicate effectively in a team environment while satisfying personal responsibilities•Ability to function in a fast-paced environment•Ability to organize and prioritize responsibilities and multi-task•Ability to assess and troubleshoot computers, software applications and equipment•Ready to speak up about concerns•Satisfaction derived from solid completion of tasks •Clear understanding of health and safety in a lab environment•PhysicaloManual dexterity oAbility to distinguish between coloursoCombination of sitting and standingoExtended periods of detailed visual inspectionoInvolves regular and recurring exposure to blood from screened donorsoWork involves inventorying and processing cards, which requires walking, bending, stretching and occasionally lifting boxes of up to 20lbsQualificationsSkills & Qualifications (Education and Experience)•Post-secondary education in a field of Science or related field, and/or combination of education and technical experience acceptable to Epocal•Proficient in using MS Office Suite (i.e. Excel, Word, PowerPoint) and capable in troubleshooting basic technological issues•Clinical laboratory experience such as blood testing, use of pipettes, centrifuges, and table-top analyzers is an asset•Some working knowledge of GMP and Good lab practices•Knowledge of basic statistics is preferred•Trained phlebotomist is considered an assetSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.caThank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Under the supervision of the Clinical Lab Lead Hand; the Finishes Goods Quality Control Laboratory Technician is responsible for: Duties and Responsibilities•Testing of cards •Testing of Readers •Testing of Capillary tubes•Routine performance checks including Adaptive Process Control, linearity, lifetimes, and validations •Assistance with testing requirements for Process Engineering, Test Engineering and R&D experimentsAssisting in routine upkeep and operational tasks related to the Clinical Lab AdvantagesKey tasks and activities will be completed with guidance and supervision from a higher-level technician or team leader:•Testing for various purposes (using written instructions) of card lots/readers/capillary tubes coming from the assembly departments. •Carries out routine maintenance and basic troubleshooting of clinical lab testing equipment and records these activities in maintenance logs with assistance and guidance form a higher-level technician.•Ability to track inventory of clinical lab supplies and replace what is in house and communicate to responsible personnel reorder points.•Participates in testing process and equipment improvement efforts, including experimental testing. Maintains appropriate records for testing.Percent of TimeFrequencyActivity50DailyProduction card Lot, Reader and Capillary tube testing, Analysis45DailyExperimental Lot Testing5Daily / WeeklyTest Equipment Maintenance / PhlebotomyResponsibilitiesDemands•Routine, detailed nature of testing•Flexibility required for varied nature of testing•Regular and reoccurring exposure to blood from screened donors•Flexibility with adjusting work hours to follow up with overnight shifts as scheduled•Attention to detail is vital•Proven ability to work and communicate effectively in a team environment while satisfying personal responsibilities•Ability to function in a fast-paced environment•Ability to organize and prioritize responsibilities and multi-task•Ability to assess and troubleshoot computers, software applications and equipment•Ready to speak up about concerns•Satisfaction derived from solid completion of tasks •Clear understanding of health and safety in a lab environment•PhysicaloManual dexterity oAbility to distinguish between coloursoCombination of sitting and standingoExtended periods of detailed visual inspectionoInvolves regular and recurring exposure to blood from screened donorsoWork involves inventorying and processing cards, which requires walking, bending, stretching and occasionally lifting boxes of up to 20lbsQualificationsSkills & Qualifications (Education and Experience)•Post-secondary education in a field of Science or related field, and/or combination of education and technical experience acceptable to Epocal•Proficient in using MS Office Suite (i.e. Excel, Word, PowerPoint) and capable in troubleshooting basic technological issues•Clinical laboratory experience such as blood testing, use of pipettes, centrifuges, and table-top analyzers is an asset•Some working knowledge of GMP and Good lab practices•Knowledge of basic statistics is preferred•Trained phlebotomist is considered an assetSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.caThank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • ottawa, ontario
    • contract
    Under the supervision of the Clinical Lab Lead Hand; the Finishes Goods Quality Control Laboratory Technician is responsible for: Duties and Responsibilities•Testing of cards •Testing of Readers •Testing of Capillary tubes•Routine performance checks including Adaptive Process Control, linearity, lifetimes, and validations •Assistance with testing requirements for Process Engineering, Test Engineering and R&D experimentsAssisting in routine upkeep and operational tasks related to the Clinical Lab AdvantagesKey tasks and activities will be completed with guidance and supervision from a higher-level technician or team leader:•Testing for various purposes (using written instructions) of card lots/readers/capillary tubes coming from the assembly departments. •Carries out routine maintenance and basic troubleshooting of clinical lab testing equipment and records these activities in maintenance logs with assistance and guidance form a higher-level technician.•Ability to track inventory of clinical lab supplies and replace what is in house and communicate to responsible personnel reorder points.•Participates in testing process and equipment improvement efforts, including experimental testing. Maintains appropriate records for testing.Percent of TimeFrequencyActivity50DailyProduction card Lot, Reader and Capillary tube testing, Analysis45DailyExperimental Lot Testing5Daily / WeeklyTest Equipment Maintenance / PhlebotomyResponsibilitiesDemands•Routine, detailed nature of testing•Flexibility required for varied nature of testing•Regular and reoccurring exposure to blood from screened donors•Flexibility with adjusting work hours to follow up with overnight shifts as scheduled•Attention to detail is vital•Proven ability to work and communicate effectively in a team environment while satisfying personal responsibilities•Ability to function in a fast-paced environment•Ability to organize and prioritize responsibilities and multi-task•Ability to assess and troubleshoot computers, software applications and equipment•Ready to speak up about concerns•Satisfaction derived from solid completion of tasks •Clear understanding of health and safety in a lab environment•PhysicaloManual dexterity oAbility to distinguish between coloursoCombination of sitting and standingoExtended periods of detailed visual inspectionoInvolves regular and recurring exposure to blood from screened donorsoWork involves inventorying and processing cards, which requires walking, bending, stretching and occasionally lifting boxes of up to 20lbsQualificationsSkills & Qualifications (Education and Experience)•Post-secondary education in a field of Science or related field, and/or combination of education and technical experience acceptable to Epocal•Proficient in using MS Office Suite (i.e. Excel, Word, PowerPoint) and capable in troubleshooting basic technological issues•Clinical laboratory experience such as blood testing, use of pipettes, centrifuges, and table-top analyzers is an asset•Some working knowledge of GMP and Good lab practices•Knowledge of basic statistics is preferred•Trained phlebotomist is considered an assetSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.caThank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Under the supervision of the Clinical Lab Lead Hand; the Finishes Goods Quality Control Laboratory Technician is responsible for: Duties and Responsibilities•Testing of cards •Testing of Readers •Testing of Capillary tubes•Routine performance checks including Adaptive Process Control, linearity, lifetimes, and validations •Assistance with testing requirements for Process Engineering, Test Engineering and R&D experimentsAssisting in routine upkeep and operational tasks related to the Clinical Lab AdvantagesKey tasks and activities will be completed with guidance and supervision from a higher-level technician or team leader:•Testing for various purposes (using written instructions) of card lots/readers/capillary tubes coming from the assembly departments. •Carries out routine maintenance and basic troubleshooting of clinical lab testing equipment and records these activities in maintenance logs with assistance and guidance form a higher-level technician.•Ability to track inventory of clinical lab supplies and replace what is in house and communicate to responsible personnel reorder points.•Participates in testing process and equipment improvement efforts, including experimental testing. Maintains appropriate records for testing.Percent of TimeFrequencyActivity50DailyProduction card Lot, Reader and Capillary tube testing, Analysis45DailyExperimental Lot Testing5Daily / WeeklyTest Equipment Maintenance / PhlebotomyResponsibilitiesDemands•Routine, detailed nature of testing•Flexibility required for varied nature of testing•Regular and reoccurring exposure to blood from screened donors•Flexibility with adjusting work hours to follow up with overnight shifts as scheduled•Attention to detail is vital•Proven ability to work and communicate effectively in a team environment while satisfying personal responsibilities•Ability to function in a fast-paced environment•Ability to organize and prioritize responsibilities and multi-task•Ability to assess and troubleshoot computers, software applications and equipment•Ready to speak up about concerns•Satisfaction derived from solid completion of tasks •Clear understanding of health and safety in a lab environment•PhysicaloManual dexterity oAbility to distinguish between coloursoCombination of sitting and standingoExtended periods of detailed visual inspectionoInvolves regular and recurring exposure to blood from screened donorsoWork involves inventorying and processing cards, which requires walking, bending, stretching and occasionally lifting boxes of up to 20lbsQualificationsSkills & Qualifications (Education and Experience)•Post-secondary education in a field of Science or related field, and/or combination of education and technical experience acceptable to Epocal•Proficient in using MS Office Suite (i.e. Excel, Word, PowerPoint) and capable in troubleshooting basic technological issues•Clinical laboratory experience such as blood testing, use of pipettes, centrifuges, and table-top analyzers is an asset•Some working knowledge of GMP and Good lab practices•Knowledge of basic statistics is preferred•Trained phlebotomist is considered an assetSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.caThank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • north york, ontario
    • permanent
    Our client in the construction / mining industry located in North York is looking for a Senior Buyer to add to their team. Reporting to the Manger of Procurement , the ideal candidate will be required to drive best practices in procurement as well as develop and execute total cost savings strategies. This is a hybrid role where you will be required to work both in office and remote. Advantages- Full time work- Competitive salary- Benefits package- Annual bonuses- Hybrid role (work from home and office)Responsibilities- Look for innovative ways on how to reduce total cost and enhance value - Planning, managing and coordinating sourcing and procurement of materials, equipment and supplies - Managing and organizing shipments (understanding of Incoterms 2020) / Importing and exporting- Work with the Manager on ways to standardize compliance of the procedure to pay process- RFQ (Request for Quotation) - sound understanding of how bidders lists work, RFQ preparation and administration, commercial negotiation with bidders, including PO's, terms and conditions, discounts, and delivery schedule - Preparation of PO documentation for award, assurance of compliance, PO day to day administration, PO closeout, including settlement of backcharges Qualifications- Bachelors Degree- Previous experience working as a Senior Buyer, preferably in the construction or engineering mining industry- 5+ years of experience in procurement, materials purchasing, supply chain- Knowledge and ability to train procurement policies and best practices to non-procurement professionals - Analytical with solid proficiency in Excel. Knowledge of procure to pay systems, processes, and associated ERPs (Microsoft Dynamics AX) preferred- CPSM, CPM or equivalent certificates preferred that help demonstrate proficiency in Procurement and Strategic SourcingSummaryIf this is something you are interested in please submit your resume or send it to Paulina Galinski - paulina.galinski@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Our client in the construction / mining industry located in North York is looking for a Senior Buyer to add to their team. Reporting to the Manger of Procurement , the ideal candidate will be required to drive best practices in procurement as well as develop and execute total cost savings strategies. This is a hybrid role where you will be required to work both in office and remote. Advantages- Full time work- Competitive salary- Benefits package- Annual bonuses- Hybrid role (work from home and office)Responsibilities- Look for innovative ways on how to reduce total cost and enhance value - Planning, managing and coordinating sourcing and procurement of materials, equipment and supplies - Managing and organizing shipments (understanding of Incoterms 2020) / Importing and exporting- Work with the Manager on ways to standardize compliance of the procedure to pay process- RFQ (Request for Quotation) - sound understanding of how bidders lists work, RFQ preparation and administration, commercial negotiation with bidders, including PO's, terms and conditions, discounts, and delivery schedule - Preparation of PO documentation for award, assurance of compliance, PO day to day administration, PO closeout, including settlement of backcharges Qualifications- Bachelors Degree- Previous experience working as a Senior Buyer, preferably in the construction or engineering mining industry- 5+ years of experience in procurement, materials purchasing, supply chain- Knowledge and ability to train procurement policies and best practices to non-procurement professionals - Analytical with solid proficiency in Excel. Knowledge of procure to pay systems, processes, and associated ERPs (Microsoft Dynamics AX) preferred- CPSM, CPM or equivalent certificates preferred that help demonstrate proficiency in Procurement and Strategic SourcingSummaryIf this is something you are interested in please submit your resume or send it to Paulina Galinski - paulina.galinski@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

It looks like you want to switch your language. This will reset your filters on your current job search.