6 jobs found in Waterloo, Ontario

filter3
clear all
    • kitchener, ontario
    • permanent
    Our client in the Kitchener-Waterloo area is looking for a Logistics Coordinator to join their growing team! Do you have 2-3 years experience coordinating all freight movements for inbound and outbound finished goods? Do you have previous manufacturing experience? This role may be for you! We are looking for individuals that are passionate about learning!Advantages• Competitive compensation• Competitive benefits• Pension plan• Career growth opportunitiesResponsibilities• Move inbound and outbound loads of finished goods• Release customer orders to the warehouse in order to support on time delivery• Arrange for outside carriers when necessary, while reviewing rate differences and using the most cost effective carrier where possible• Prepare paperwork for outbound shipments when required. Set up PAPS clearance when required• Prepare appropriate documentation and labelling daily to support shipping for a variety ofonline orders••Qualifications• 2-3 years working in Logistics• Post secondary education in Supply Chain preferred• Experience with AS400 and Lean Logistics• Manufacturing experience a must• Bilingual nice to haveSummaryApply online today! Or send your resume to Lisa Medeiros at Lisa.Medeiros@randstad.ca Only qualified candidates will be contactedRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Our client in the Kitchener-Waterloo area is looking for a Logistics Coordinator to join their growing team! Do you have 2-3 years experience coordinating all freight movements for inbound and outbound finished goods? Do you have previous manufacturing experience? This role may be for you! We are looking for individuals that are passionate about learning!Advantages• Competitive compensation• Competitive benefits• Pension plan• Career growth opportunitiesResponsibilities• Move inbound and outbound loads of finished goods• Release customer orders to the warehouse in order to support on time delivery• Arrange for outside carriers when necessary, while reviewing rate differences and using the most cost effective carrier where possible• Prepare paperwork for outbound shipments when required. Set up PAPS clearance when required• Prepare appropriate documentation and labelling daily to support shipping for a variety ofonline orders••Qualifications• 2-3 years working in Logistics• Post secondary education in Supply Chain preferred• Experience with AS400 and Lean Logistics• Manufacturing experience a must• Bilingual nice to haveSummaryApply online today! Or send your resume to Lisa Medeiros at Lisa.Medeiros@randstad.ca Only qualified candidates will be contactedRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • kitchener, ontario
    • permanent
    Our client in Kitchener has partnered with Randstad Engineering in their search for a Civil Project Manager to join their growing Site Development team! In this role, you will be responsible for the planning, execution and delivery of site development projects, ensuring the project is within budget and on schedule, and client management.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, RRSP Matching Program, Benefits, Vacation and Flexibility.Responsibilities•Managing project financials including invoicing, progress payment certificates, collecting accounts receivables and managing project budgets •Participate in business development activities and lead project meetings•Procure new projects and clients by identifying business development opportunities, understanding industry and development in the Region of Waterloo, leading proposal efforts including completing project scoping and RFP assessments•Manage day-to-day client interactions, communicate effectively with clients and internal/external project teams, and continually seek opportunities to increase client satisfaction•Managing project execution by providing direction to the project team, appropriately scheduling time and acting as main point of contact between internal and external project teamsQualifications•Degree or Diploma in Civil Engineering;•Minimum 3-5 years in a project management role•P.Eng. designation•Understanding of the Site Plan review process•Technical understanding of applicable government technical standards and general engineering practices, processes, and legislative regulations.SummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Our client in Kitchener has partnered with Randstad Engineering in their search for a Civil Project Manager to join their growing Site Development team! In this role, you will be responsible for the planning, execution and delivery of site development projects, ensuring the project is within budget and on schedule, and client management.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, RRSP Matching Program, Benefits, Vacation and Flexibility.Responsibilities•Managing project financials including invoicing, progress payment certificates, collecting accounts receivables and managing project budgets •Participate in business development activities and lead project meetings•Procure new projects and clients by identifying business development opportunities, understanding industry and development in the Region of Waterloo, leading proposal efforts including completing project scoping and RFP assessments•Manage day-to-day client interactions, communicate effectively with clients and internal/external project teams, and continually seek opportunities to increase client satisfaction•Managing project execution by providing direction to the project team, appropriately scheduling time and acting as main point of contact between internal and external project teamsQualifications•Degree or Diploma in Civil Engineering;•Minimum 3-5 years in a project management role•P.Eng. designation•Understanding of the Site Plan review process•Technical understanding of applicable government technical standards and general engineering practices, processes, and legislative regulations.SummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • kitchener, ontario
    • contract
    Are you a experience working with inspection and metrology?Will a new role with a very appealing industry leader be of interest?If so, this could be the opportunity for you!Position will be a 12 month contract with an opportunity of longer term.Inspection of mechanical and optical components, including:Cosmetic inspection and defect classification - direct/magnified using microscopes and imagingFirst article metrology using micrometers, gauges, Keyence VR, CMM.Optical coating performance measurement using spectrometers, hazemeters, etc.Material management: organize material inventory, support shipment of samples to and from vendors and company offices, Minimum set of skills: solid knowledge of metrology concepts and tools, understanding of quality control systems, ability program and use CMM, understanding of coordinate systems and how they apply to measuring components with complex geometry and datums, perform moderate data analysis, identify trends and make recommendations to improve measurement/control methods.Specific skill sets include: Mechanical aptitude, interacting with vendors and issuing corrective action reports, strong understanding of GD&T, experience with handling and characterizing optical components.AdvantagesWork with a world class organization.Excellent employee cultureExcellent opportunity for problem-solversResponsibilitiesInspection of mechanical and optical components, including:Cosmetic inspection and defect classification - direct/magnified using microscopes and imagingFirst article metrology using micrometers, gauges, Keyence VR, CMM.Optical coating performance measurement using spectrometers, hazemeters, etc.Material management: organize material inventory, support shipment of samples to and from vendors and company offices, Minimum set of skills: solid knowledge of metrology concepts and tools, understanding of quality control systems, ability program and use CMM, understanding of coordinate systems and how they apply to measuring components with complex geometry and datums, perform moderate data analysis, identify trends and make recommendations to improve measurement/control methods.Specific skill sets include: Mechanical aptitude, interacting with vendors and issuing corrective action reports, strong understanding of GD&T, experience with handling and characterizing optical components.QualificationsMandatorysolid knowledge of metrology concepts and tools, understanding of quality control systems, ability program and use CMM, understanding of coordinate systems and how they apply to measuring components with complex geometry and datums, perform moderate data analysis, identify trends and make recommendations to improve measurement/control methods.DesiredMechanical aptitude, interacting with vendors and issuing corrective action reports, strong understanding of GD&T, experience with handling and characterizing optical components.SummaryEmail resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Are you a experience working with inspection and metrology?Will a new role with a very appealing industry leader be of interest?If so, this could be the opportunity for you!Position will be a 12 month contract with an opportunity of longer term.Inspection of mechanical and optical components, including:Cosmetic inspection and defect classification - direct/magnified using microscopes and imagingFirst article metrology using micrometers, gauges, Keyence VR, CMM.Optical coating performance measurement using spectrometers, hazemeters, etc.Material management: organize material inventory, support shipment of samples to and from vendors and company offices, Minimum set of skills: solid knowledge of metrology concepts and tools, understanding of quality control systems, ability program and use CMM, understanding of coordinate systems and how they apply to measuring components with complex geometry and datums, perform moderate data analysis, identify trends and make recommendations to improve measurement/control methods.Specific skill sets include: Mechanical aptitude, interacting with vendors and issuing corrective action reports, strong understanding of GD&T, experience with handling and characterizing optical components.AdvantagesWork with a world class organization.Excellent employee cultureExcellent opportunity for problem-solversResponsibilitiesInspection of mechanical and optical components, including:Cosmetic inspection and defect classification - direct/magnified using microscopes and imagingFirst article metrology using micrometers, gauges, Keyence VR, CMM.Optical coating performance measurement using spectrometers, hazemeters, etc.Material management: organize material inventory, support shipment of samples to and from vendors and company offices, Minimum set of skills: solid knowledge of metrology concepts and tools, understanding of quality control systems, ability program and use CMM, understanding of coordinate systems and how they apply to measuring components with complex geometry and datums, perform moderate data analysis, identify trends and make recommendations to improve measurement/control methods.Specific skill sets include: Mechanical aptitude, interacting with vendors and issuing corrective action reports, strong understanding of GD&T, experience with handling and characterizing optical components.QualificationsMandatorysolid knowledge of metrology concepts and tools, understanding of quality control systems, ability program and use CMM, understanding of coordinate systems and how they apply to measuring components with complex geometry and datums, perform moderate data analysis, identify trends and make recommendations to improve measurement/control methods.DesiredMechanical aptitude, interacting with vendors and issuing corrective action reports, strong understanding of GD&T, experience with handling and characterizing optical components.SummaryEmail resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • waterloo, ontario
    • permanent
    Working with the Planning Department and the project consultant team, the Urban Planner will be responsible for a portfolio of development projects from due diligence through municipal approvals. The Urban Planner will work collaboratively with internal and external consultants to obtain development approvals in an efficient and professional manner.Responsibilities:Assemble and direct project teams of consultants required for submission of various development applications, including Official Plan and Zoning By-Law Amendments, Plans of Condominiums, Site Plan Approval, Consent & Minor Variance Applications and demolition control approval.Liaise with project stakeholders, including Municipal Staff & Council and community members to establish positive, constructive relationships to assist in advancing development projects.Manager and/or assist Managing project teams in the coordination, communication and negotiations with Municipal Staff through the development approvals process to obtain project objectives and deliverables in an efficient and timely manner.Coordination with other internal groups, such as Finance, Accounting, Marketing, Architecture, Construction, and Property Management throughout development project phases as may be required.Prepare and coordinate high quality written materials including Planning Justification Reports, Due Diligence Reports, Urban Design Briefs, Planning Summaries, and supporting application materials.Manage projects schedules and provide bi-weekly updates to project stakeholders..Undertake planning evaluations and development feasibility analysis on new land acquisition opportunities as directed by the manager of Planning & Strategic Initiatives.Attend planning/design meetings .Provide public presentations at Public Meetings, Council Meetings and Committee meetings as needed.Qualifications:Bachelors and/or Masters Degree in Planning from an accredited University.Min 3 years of experience in the Planning and Development industry.Registered Professional Planner designation or candidate status an asset.Thorough understanding and effectiveness in managing projects through the development approvals process and analyzing applicable policies.Good knowledge of land development, including residential, mixed -use commercial, and agricultural developments. Ability to manage projects effectively on time and on budget.Experience with Microsoft Office 365 required.Class G drivers licence and access to a personal vehicle.Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesManager and/or assist Managing project teams in the coordination, communication and negotiations with Municipal Staff through the development approvals process to obtain project objectives and deliverables in an efficient and timely manner.Registered Professional Planner designation or candidate status an asset.ResponsibilitiesWorking with the Planning Department and the project consultant team, the Urban Planner will be responsible for a portfolio of development projects from due diligence through municipal approvals. The Urban Planner will work collaboratively with internal and external consultants to obtain development approvals in an efficient and professional manner.Responsibilities:Assemble and direct project teams of consultants required for submission of various development applications, including Official Plan and Zoning By-Law Amendments, Plans of Condominiums, Site Plan Approval, Consent & Minor Variance Applications and demolition control approval.Liaise with project stakeholders, including Municipal Staff & Council and community members to establish positive, constructive relationships to assist in advancing development projects.Manager and/or assist Managing project teams in the coordination, communication and negotiations with Municipal Staff through the development approvals process to obtain project objectives and deliverables in an efficient and timely manner.Coordination with other internal groups, such as Finance, Accounting, Marketing, Architecture, Construction, and Property Management throughout development project phases as may be required.Prepare and coordinate high quality written materials including Planning Justification Reports, Due Diligence Reports, Urban Design Briefs, Planning Summaries, and supporting application materials.Manage projects schedules and provide bi-weekly updates to project stakeholders..Undertake planning evaluations and development feasibility analysis on new land acquisition opportunities as directed by the manager of Planning & Strategic Initiatives.Attend planning/design meetings .Provide public presentations at Public Meetings, Council Meetings and Committee meetings as needed.Qualifications:Bachelors and/or Masters Degree in Planning from an accredited University.Min 3 years of experience in the Planning and Development industry.Registered Professional Planner designation or candidate status an asset.Thorough understanding and effectiveness in managing projects through the development approvals process and analyzing applicable policies.Good knowledge of land development, including residential, mixed -use commercial, and agricultural developments. Ability to manage projects effectively on time and on budget.Experience with Microsoft Office 365 required.Class G drivers licence and access to a personal vehicle.Please send your resume in confidence to paul.dusome@randstad.ca QualificationsQualifications:Bachelors and/or Masters Degree in Planning from an accredited University.Min 3 years of experience in the Planning and Development industry.Registered Professional Planner designation or candidate status an asset.Thorough understanding and effectiveness in managing projects through the development approvals process and analyzing applicable policies.Good knowledge of land development, including residential, mixed -use commercial, and agricultural developments. Ability to manage projects effectively on time and on budget.Experience with Microsoft Office 365 required.Class G drivers licence and access to a personal vehicle.SummaryWorking with the Planning Department and the project consultant team, the Urban Planner will be responsible for a portfolio of development projects from due diligence through municipal approvals. The Urban Planner will work collaboratively with internal and external consultants to obtain development approvals in an efficient and professional manner.Responsibilities:Assemble and direct project teams of consultants required for submission of various development applications, including Official Plan and Zoning By-Law Amendments, Plans of Condominiums, Site Plan Approval, Consent & Minor Variance Applications and demolition control approval.Liaise with project stakeholders, including Municipal Staff & Council and community members to establish positive, constructive relationships to assist in advancing development projects.Manager and/or assist Managing project teams in the coordination, communication and negotiations with Municipal Staff through the development approvals process to obtain project objectives and deliverables in an efficient and timely manner.Coordination with other internal groups, such as Finance, Accounting, Marketing, Architecture, Construction, and Property Management throughout development project phases as may be required.Prepare and coordinate high quality written materials including Planning Justification Reports, Due Diligence Reports, Urban Design Briefs, Planning Summaries, and supporting application materials.Manage projects schedules and provide bi-weekly updates to project stakeholders..Undertake planning evaluations and development feasibility analysis on new land acquisition opportunities as directed by the manager of Planning & Strategic Initiatives.Attend planning/design meetings .Provide public presentations at Public Meetings, Council Meetings and Committee meetings as needed.Qualifications:Bachelors and/or Masters Degree in Planning from an accredited University.Min 3 years of experience in the Planning and Development industry.Registered Professional Planner designation or candidate status an asset.Thorough understanding and effectiveness in managing projects through the development approvals process and analyzing applicable policies.Good knowledge of land development, including residential, mixed -use commercial, and agricultural developments. Ability to manage projects effectively on time and on budget.Experience with Microsoft Office 365 required.Class G drivers licence and access to a personal vehicle.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Working with the Planning Department and the project consultant team, the Urban Planner will be responsible for a portfolio of development projects from due diligence through municipal approvals. The Urban Planner will work collaboratively with internal and external consultants to obtain development approvals in an efficient and professional manner.Responsibilities:Assemble and direct project teams of consultants required for submission of various development applications, including Official Plan and Zoning By-Law Amendments, Plans of Condominiums, Site Plan Approval, Consent & Minor Variance Applications and demolition control approval.Liaise with project stakeholders, including Municipal Staff & Council and community members to establish positive, constructive relationships to assist in advancing development projects.Manager and/or assist Managing project teams in the coordination, communication and negotiations with Municipal Staff through the development approvals process to obtain project objectives and deliverables in an efficient and timely manner.Coordination with other internal groups, such as Finance, Accounting, Marketing, Architecture, Construction, and Property Management throughout development project phases as may be required.Prepare and coordinate high quality written materials including Planning Justification Reports, Due Diligence Reports, Urban Design Briefs, Planning Summaries, and supporting application materials.Manage projects schedules and provide bi-weekly updates to project stakeholders..Undertake planning evaluations and development feasibility analysis on new land acquisition opportunities as directed by the manager of Planning & Strategic Initiatives.Attend planning/design meetings .Provide public presentations at Public Meetings, Council Meetings and Committee meetings as needed.Qualifications:Bachelors and/or Masters Degree in Planning from an accredited University.Min 3 years of experience in the Planning and Development industry.Registered Professional Planner designation or candidate status an asset.Thorough understanding and effectiveness in managing projects through the development approvals process and analyzing applicable policies.Good knowledge of land development, including residential, mixed -use commercial, and agricultural developments. Ability to manage projects effectively on time and on budget.Experience with Microsoft Office 365 required.Class G drivers licence and access to a personal vehicle.Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesManager and/or assist Managing project teams in the coordination, communication and negotiations with Municipal Staff through the development approvals process to obtain project objectives and deliverables in an efficient and timely manner.Registered Professional Planner designation or candidate status an asset.ResponsibilitiesWorking with the Planning Department and the project consultant team, the Urban Planner will be responsible for a portfolio of development projects from due diligence through municipal approvals. The Urban Planner will work collaboratively with internal and external consultants to obtain development approvals in an efficient and professional manner.Responsibilities:Assemble and direct project teams of consultants required for submission of various development applications, including Official Plan and Zoning By-Law Amendments, Plans of Condominiums, Site Plan Approval, Consent & Minor Variance Applications and demolition control approval.Liaise with project stakeholders, including Municipal Staff & Council and community members to establish positive, constructive relationships to assist in advancing development projects.Manager and/or assist Managing project teams in the coordination, communication and negotiations with Municipal Staff through the development approvals process to obtain project objectives and deliverables in an efficient and timely manner.Coordination with other internal groups, such as Finance, Accounting, Marketing, Architecture, Construction, and Property Management throughout development project phases as may be required.Prepare and coordinate high quality written materials including Planning Justification Reports, Due Diligence Reports, Urban Design Briefs, Planning Summaries, and supporting application materials.Manage projects schedules and provide bi-weekly updates to project stakeholders..Undertake planning evaluations and development feasibility analysis on new land acquisition opportunities as directed by the manager of Planning & Strategic Initiatives.Attend planning/design meetings .Provide public presentations at Public Meetings, Council Meetings and Committee meetings as needed.Qualifications:Bachelors and/or Masters Degree in Planning from an accredited University.Min 3 years of experience in the Planning and Development industry.Registered Professional Planner designation or candidate status an asset.Thorough understanding and effectiveness in managing projects through the development approvals process and analyzing applicable policies.Good knowledge of land development, including residential, mixed -use commercial, and agricultural developments. Ability to manage projects effectively on time and on budget.Experience with Microsoft Office 365 required.Class G drivers licence and access to a personal vehicle.Please send your resume in confidence to paul.dusome@randstad.ca QualificationsQualifications:Bachelors and/or Masters Degree in Planning from an accredited University.Min 3 years of experience in the Planning and Development industry.Registered Professional Planner designation or candidate status an asset.Thorough understanding and effectiveness in managing projects through the development approvals process and analyzing applicable policies.Good knowledge of land development, including residential, mixed -use commercial, and agricultural developments. Ability to manage projects effectively on time and on budget.Experience with Microsoft Office 365 required.Class G drivers licence and access to a personal vehicle.SummaryWorking with the Planning Department and the project consultant team, the Urban Planner will be responsible for a portfolio of development projects from due diligence through municipal approvals. The Urban Planner will work collaboratively with internal and external consultants to obtain development approvals in an efficient and professional manner.Responsibilities:Assemble and direct project teams of consultants required for submission of various development applications, including Official Plan and Zoning By-Law Amendments, Plans of Condominiums, Site Plan Approval, Consent & Minor Variance Applications and demolition control approval.Liaise with project stakeholders, including Municipal Staff & Council and community members to establish positive, constructive relationships to assist in advancing development projects.Manager and/or assist Managing project teams in the coordination, communication and negotiations with Municipal Staff through the development approvals process to obtain project objectives and deliverables in an efficient and timely manner.Coordination with other internal groups, such as Finance, Accounting, Marketing, Architecture, Construction, and Property Management throughout development project phases as may be required.Prepare and coordinate high quality written materials including Planning Justification Reports, Due Diligence Reports, Urban Design Briefs, Planning Summaries, and supporting application materials.Manage projects schedules and provide bi-weekly updates to project stakeholders..Undertake planning evaluations and development feasibility analysis on new land acquisition opportunities as directed by the manager of Planning & Strategic Initiatives.Attend planning/design meetings .Provide public presentations at Public Meetings, Council Meetings and Committee meetings as needed.Qualifications:Bachelors and/or Masters Degree in Planning from an accredited University.Min 3 years of experience in the Planning and Development industry.Registered Professional Planner designation or candidate status an asset.Thorough understanding and effectiveness in managing projects through the development approvals process and analyzing applicable policies.Good knowledge of land development, including residential, mixed -use commercial, and agricultural developments. Ability to manage projects effectively on time and on budget.Experience with Microsoft Office 365 required.Class G drivers licence and access to a personal vehicle.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • waterloo, ontario
    • permanent
    The Architectural Technologist will work with the Job Captain and the Architect to provide the link between schematic Design and construction documents using Revit.Responsibilities: Producing Architectural working drawings and specifications using CAD and BIM (Revit).Implementation of redline markups in all drawings.Creation of HI-Rise plans including fire evacuation plans.Drawing production - annotation as required for floor plans, sections and details. Stair and elevator modelling and drawing production: Plans, Sections and Details.Analyse architectural plans and drawings, highlighting possible risks or problems and making amendments using Revit and BIM 360. Provide drafting support to the Job Captain, Architect, Designer and other construction professionals. During construction, provide support to Contract Administrator preparing Site Instructions, Site Visit Reports, deficiencies and other contract documents. Coordinate architectural drawings with consultant engineering drawings and shop drawings. May be involved in post -construction appraisal stages, handing the project over to the client. Qualifications: Diploma or Degree in Architecture or Architectural Technology. 5+ years of experience in producing working drawings.Strong knowledge in REVIT and AutoCAD Strong experience of building and material practises. Ability to prepare a full set of Architectural Drawings.Please send your resume in confidence to paul.dusome@randstad.caAdvantagesDrawing production - annotation as required for floor plans, sections and details. Stair and elevator modelling and drawing production: Plans, Sections and Details.Analyse architectural plans and drawings, highlighting possible risks or problems and making amendments using Revit and BIM 360. ResponsibilitiesThe Architectural Technologist will work with the Job Captain and the Architect to provide the link between schematic Design and construction documents using Revit.Responsibilities: Producing Architectural working drawings and specifications using CAD and BIM (Revit).Implementation of redline markups in all drawings.Creation of HI-Rise plans including fire evacuation plans.Drawing production - annotation as required for floor plans, sections and details. Stair and elevator modelling and drawing production: Plans, Sections and Details.Analyse architectural plans and drawings, highlighting possible risks or problems and making amendments using Revit and BIM 360. Provide drafting support to the Job Captain, Architect, Designer and other construction professionals. During construction, provide support to Contract Administrator preparing Site Instructions, Site Visit Reports, deficiencies and other contract documents. Coordinate architectural drawings with consultant engineering drawings and shop drawings. May be involved in post -construction appraisal stages, handing the project over to the client. Qualifications: Diploma or Degree in Architecture or Architectural Technology. 5+ years of experience in producing working drawings.Strong knowledge in REVIT and AutoCAD Strong experience of building and material practises. Ability to prepare a full set of Architectural Drawings.Please send your resume in confidence to paul.dusome@randstad.caQualificationsQualifications: Diploma or Degree in Architecture or Architectural Technology. 5+ years of experience in producing working drawings.Strong knowledge in REVIT and AutoCAD Strong experience of building and material practises. Ability to prepare a full set of Architectural Drawings.SummaryThe Architectural Technologist will work with the Job Captain and the Architect to provide the link between schematic Design and construction documents using Revit.Responsibilities: Producing Architectural working drawings and specifications using CAD and BIM (Revit).Implementation of redline markups in all drawings.Creation of HI-Rise plans including fire evacuation plans.Drawing production - annotation as required for floor plans, sections and details. Stair and elevator modelling and drawing production: Plans, Sections and Details.Analyse architectural plans and drawings, highlighting possible risks or problems and making amendments using Revit and BIM 360. Provide drafting support to the Job Captain, Architect, Designer and other construction professionals. During construction, provide support to Contract Administrator preparing Site Instructions, Site Visit Reports, deficiencies and other contract documents. Coordinate architectural drawings with consultant engineering drawings and shop drawings. May be involved in post -construction appraisal stages, handing the project over to the client. Qualifications: Diploma or Degree in Architecture or Architectural Technology. 5+ years of experience in producing working drawings.Strong knowledge in REVIT and AutoCAD Strong experience of building and material practises. Ability to prepare a full set of Architectural Drawings.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    The Architectural Technologist will work with the Job Captain and the Architect to provide the link between schematic Design and construction documents using Revit.Responsibilities: Producing Architectural working drawings and specifications using CAD and BIM (Revit).Implementation of redline markups in all drawings.Creation of HI-Rise plans including fire evacuation plans.Drawing production - annotation as required for floor plans, sections and details. Stair and elevator modelling and drawing production: Plans, Sections and Details.Analyse architectural plans and drawings, highlighting possible risks or problems and making amendments using Revit and BIM 360. Provide drafting support to the Job Captain, Architect, Designer and other construction professionals. During construction, provide support to Contract Administrator preparing Site Instructions, Site Visit Reports, deficiencies and other contract documents. Coordinate architectural drawings with consultant engineering drawings and shop drawings. May be involved in post -construction appraisal stages, handing the project over to the client. Qualifications: Diploma or Degree in Architecture or Architectural Technology. 5+ years of experience in producing working drawings.Strong knowledge in REVIT and AutoCAD Strong experience of building and material practises. Ability to prepare a full set of Architectural Drawings.Please send your resume in confidence to paul.dusome@randstad.caAdvantagesDrawing production - annotation as required for floor plans, sections and details. Stair and elevator modelling and drawing production: Plans, Sections and Details.Analyse architectural plans and drawings, highlighting possible risks or problems and making amendments using Revit and BIM 360. ResponsibilitiesThe Architectural Technologist will work with the Job Captain and the Architect to provide the link between schematic Design and construction documents using Revit.Responsibilities: Producing Architectural working drawings and specifications using CAD and BIM (Revit).Implementation of redline markups in all drawings.Creation of HI-Rise plans including fire evacuation plans.Drawing production - annotation as required for floor plans, sections and details. Stair and elevator modelling and drawing production: Plans, Sections and Details.Analyse architectural plans and drawings, highlighting possible risks or problems and making amendments using Revit and BIM 360. Provide drafting support to the Job Captain, Architect, Designer and other construction professionals. During construction, provide support to Contract Administrator preparing Site Instructions, Site Visit Reports, deficiencies and other contract documents. Coordinate architectural drawings with consultant engineering drawings and shop drawings. May be involved in post -construction appraisal stages, handing the project over to the client. Qualifications: Diploma or Degree in Architecture or Architectural Technology. 5+ years of experience in producing working drawings.Strong knowledge in REVIT and AutoCAD Strong experience of building and material practises. Ability to prepare a full set of Architectural Drawings.Please send your resume in confidence to paul.dusome@randstad.caQualificationsQualifications: Diploma or Degree in Architecture or Architectural Technology. 5+ years of experience in producing working drawings.Strong knowledge in REVIT and AutoCAD Strong experience of building and material practises. Ability to prepare a full set of Architectural Drawings.SummaryThe Architectural Technologist will work with the Job Captain and the Architect to provide the link between schematic Design and construction documents using Revit.Responsibilities: Producing Architectural working drawings and specifications using CAD and BIM (Revit).Implementation of redline markups in all drawings.Creation of HI-Rise plans including fire evacuation plans.Drawing production - annotation as required for floor plans, sections and details. Stair and elevator modelling and drawing production: Plans, Sections and Details.Analyse architectural plans and drawings, highlighting possible risks or problems and making amendments using Revit and BIM 360. Provide drafting support to the Job Captain, Architect, Designer and other construction professionals. During construction, provide support to Contract Administrator preparing Site Instructions, Site Visit Reports, deficiencies and other contract documents. Coordinate architectural drawings with consultant engineering drawings and shop drawings. May be involved in post -construction appraisal stages, handing the project over to the client. Qualifications: Diploma or Degree in Architecture or Architectural Technology. 5+ years of experience in producing working drawings.Strong knowledge in REVIT and AutoCAD Strong experience of building and material practises. Ability to prepare a full set of Architectural Drawings.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • waterloo, ontario
    • permanent
    The Drafting Supervisor will work with the Architectural Technologists, Architects and other building professionals to provide the general contractor with a complete architectural package.Responsibilities: Create schedule in Microsoft Planner.Oversee the production of architectural working drawings and specifications using CAD and BIM software.Do redline markups in all drawings.Participate in drawing production-annotation as required for Floor Plan, Building Sections, Wall sections, Plan Details, Sector details.Research product and materials.Stair and elevator modeling and drawing production: Sections and Details.Fire separation plans and suite numbering.Create plans annotation: 1:100 and 1:50 scale for all drawings.Analyze architectural plans and drawings, highlighting any possible risks or problems and making amendments using Revit and BIM 360.Specifying the appropriate technology and tools to be used in the project and advising where this requires deviation from the initial design plans.Provide drafting support Architect, Designer and other construction professionals as required.During construction, provide support to Contract Administrator preparing Site Instructions, Site Visit Reports, deficiencies and other contract documents.May be involved in post-construction appraisal stages; handing the project over to the client or making sure the building is appropriately furnished ad prepared to client specification.Coordinate architectural drawings with consultant engineering drawings and shop drawings.Solve design and technical issue through hand sketches.Other duties as required.Qualifications:Diploma or Degree in Architecture Technology.5+ years in a supervisory role.Strong knowledge in REVIT and AutoCAD.Strong knowledge of building and material practises.Ability to prepare a full set of working drawings. Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesAnalyze architectural plans and drawings, highlighting any possible risks or problems and making amendments using Revit and BIM 360.Specifying the appropriate technology and tools to be used in the project and advising where this requires deviation from the initial design plans.Provide drafting support Architect, Designer and other construction professionals as required.ResponsibilitiesThe Drafting Supervisor will work with the Architectural Technologists, Architects and other building professionals to provide the general contractor with a complete architectural package.Responsibilities: Create schedule in Microsoft Planner.Oversee the production of architectural working drawings and specifications using CAD and BIM software.Do redline markups in all drawings.Participate in drawing production-annotation as required for Floor Plan, Building Sections, Wall sections, Plan Details, Sector details.Research product and materials.Stair and elevator modeling and drawing production: Sections and Details.Fire separation plans and suite numbering.Create plans annotation: 1:100 and 1:50 scale for all drawings.Analyze architectural plans and drawings, highlighting any possible risks or problems and making amendments using Revit and BIM 360.Specifying the appropriate technology and tools to be used in the project and advising where this requires deviation from the initial design plans.Provide drafting support Architect, Designer and other construction professionals as required.During construction, provide support to Contract Administrator preparing Site Instructions, Site Visit Reports, deficiencies and other contract documents.May be involved in post-construction appraisal stages; handing the project over to the client or making sure the building is appropriately furnished ad prepared to client specification.Coordinate architectural drawings with consultant engineering drawings and shop drawings.Solve design and technical issue through hand sketches.Other duties as required.Qualifications:Diploma or Degree in Architecture Technology.5+ years in a supervisory role.Strong knowledge in REVIT and AutoCAD.Strong knowledge of building and material practises.Ability to prepare a full set of working drawings. Please send your resume in confidence to paul.dusome@randstad.ca QualificationsDiploma or Degree in Architecture Technology.5+ years in a supervisory role.Strong knowledge in REVIT and AutoCAD.Strong knowledge of building and material practises.Ability to prepare a full set of working drawings. SummaryThe Drafting Supervisor will work with the Architectural Technologists, Architects and other building professionals to provide the general contractor with a complete architectural package.Responsibilities: Create schedule in Microsoft Planner.Oversee the production of architectural working drawings and specifications using CAD and BIM software.Do redline markups in all drawings.Participate in drawing production-annotation as required for Floor Plan, Building Sections, Wall sections, Plan Details, Sector details.Research product and materials.Stair and elevator modeling and drawing production: Sections and Details.Fire separation plans and suite numbering.Create plans annotation: 1:100 and 1:50 scale for all drawings.Analyze architectural plans and drawings, highlighting any possible risks or problems and making amendments using Revit and BIM 360.Specifying the appropriate technology and tools to be used in the project and advising where this requires deviation from the initial design plans.Provide drafting support Architect, Designer and other construction professionals as required.During construction, provide support to Contract Administrator preparing Site Instructions, Site Visit Reports, deficiencies and other contract documents.May be involved in post-construction appraisal stages; handing the project over to the client or making sure the building is appropriately furnished ad prepared to client specification.Coordinate architectural drawings with consultant engineering drawings and shop drawings.Solve design and technical issue through hand sketches.Other duties as required.Qualifications:Diploma or Degree in Architecture Technology.5+ years in a supervisory role.Strong knowledge in REVIT and AutoCAD.Strong knowledge of building and material practises.Ability to prepare a full set of working drawings. Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    The Drafting Supervisor will work with the Architectural Technologists, Architects and other building professionals to provide the general contractor with a complete architectural package.Responsibilities: Create schedule in Microsoft Planner.Oversee the production of architectural working drawings and specifications using CAD and BIM software.Do redline markups in all drawings.Participate in drawing production-annotation as required for Floor Plan, Building Sections, Wall sections, Plan Details, Sector details.Research product and materials.Stair and elevator modeling and drawing production: Sections and Details.Fire separation plans and suite numbering.Create plans annotation: 1:100 and 1:50 scale for all drawings.Analyze architectural plans and drawings, highlighting any possible risks or problems and making amendments using Revit and BIM 360.Specifying the appropriate technology and tools to be used in the project and advising where this requires deviation from the initial design plans.Provide drafting support Architect, Designer and other construction professionals as required.During construction, provide support to Contract Administrator preparing Site Instructions, Site Visit Reports, deficiencies and other contract documents.May be involved in post-construction appraisal stages; handing the project over to the client or making sure the building is appropriately furnished ad prepared to client specification.Coordinate architectural drawings with consultant engineering drawings and shop drawings.Solve design and technical issue through hand sketches.Other duties as required.Qualifications:Diploma or Degree in Architecture Technology.5+ years in a supervisory role.Strong knowledge in REVIT and AutoCAD.Strong knowledge of building and material practises.Ability to prepare a full set of working drawings. Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesAnalyze architectural plans and drawings, highlighting any possible risks or problems and making amendments using Revit and BIM 360.Specifying the appropriate technology and tools to be used in the project and advising where this requires deviation from the initial design plans.Provide drafting support Architect, Designer and other construction professionals as required.ResponsibilitiesThe Drafting Supervisor will work with the Architectural Technologists, Architects and other building professionals to provide the general contractor with a complete architectural package.Responsibilities: Create schedule in Microsoft Planner.Oversee the production of architectural working drawings and specifications using CAD and BIM software.Do redline markups in all drawings.Participate in drawing production-annotation as required for Floor Plan, Building Sections, Wall sections, Plan Details, Sector details.Research product and materials.Stair and elevator modeling and drawing production: Sections and Details.Fire separation plans and suite numbering.Create plans annotation: 1:100 and 1:50 scale for all drawings.Analyze architectural plans and drawings, highlighting any possible risks or problems and making amendments using Revit and BIM 360.Specifying the appropriate technology and tools to be used in the project and advising where this requires deviation from the initial design plans.Provide drafting support Architect, Designer and other construction professionals as required.During construction, provide support to Contract Administrator preparing Site Instructions, Site Visit Reports, deficiencies and other contract documents.May be involved in post-construction appraisal stages; handing the project over to the client or making sure the building is appropriately furnished ad prepared to client specification.Coordinate architectural drawings with consultant engineering drawings and shop drawings.Solve design and technical issue through hand sketches.Other duties as required.Qualifications:Diploma or Degree in Architecture Technology.5+ years in a supervisory role.Strong knowledge in REVIT and AutoCAD.Strong knowledge of building and material practises.Ability to prepare a full set of working drawings. Please send your resume in confidence to paul.dusome@randstad.ca QualificationsDiploma or Degree in Architecture Technology.5+ years in a supervisory role.Strong knowledge in REVIT and AutoCAD.Strong knowledge of building and material practises.Ability to prepare a full set of working drawings. SummaryThe Drafting Supervisor will work with the Architectural Technologists, Architects and other building professionals to provide the general contractor with a complete architectural package.Responsibilities: Create schedule in Microsoft Planner.Oversee the production of architectural working drawings and specifications using CAD and BIM software.Do redline markups in all drawings.Participate in drawing production-annotation as required for Floor Plan, Building Sections, Wall sections, Plan Details, Sector details.Research product and materials.Stair and elevator modeling and drawing production: Sections and Details.Fire separation plans and suite numbering.Create plans annotation: 1:100 and 1:50 scale for all drawings.Analyze architectural plans and drawings, highlighting any possible risks or problems and making amendments using Revit and BIM 360.Specifying the appropriate technology and tools to be used in the project and advising where this requires deviation from the initial design plans.Provide drafting support Architect, Designer and other construction professionals as required.During construction, provide support to Contract Administrator preparing Site Instructions, Site Visit Reports, deficiencies and other contract documents.May be involved in post-construction appraisal stages; handing the project over to the client or making sure the building is appropriately furnished ad prepared to client specification.Coordinate architectural drawings with consultant engineering drawings and shop drawings.Solve design and technical issue through hand sketches.Other duties as required.Qualifications:Diploma or Degree in Architecture Technology.5+ years in a supervisory role.Strong knowledge in REVIT and AutoCAD.Strong knowledge of building and material practises.Ability to prepare a full set of working drawings. Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

It looks like you want to switch your language. This will reset your filters on your current job search.