10 jobs found in zalaegerszeg, zala

filter5
clear all
    • zalaegerszeg, zala
    • permanent
    Cégleírás / Organisation/DepartmentOur partner is one of the markets major, full-service providers in the defence sector. It covers logistical and tactical military vehicles both wheeled and tracked as well as combat vehicles and turret systems for armed forces the world over from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Groups Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles.Pozíció leírása / Job descriptionOperational management of the team Production Planning and Production ControlCreation of work plans and parts listsSpecification of internal or external processingPreparation of cost estimatesCreation and presentation of evaluations and reportingsOptimization of manufacturing processesPreparation of assembly instructions and standard work instructionsDefinition of production processes and value streams in Operations prior to production start-upFurther development of work preparation (e.g. creation of work plans, REFA, MTM and workplace design)Elvárások / RequirementsIndustrial engineering, production technology, mechanical engineering degree or comparable qualificationMinimum 2 years of professional experience in a position in the field of production engineering in a manufacturing companyStrong knowledge of lean management methods, work preparation, and logisticsGood knowledge in welding and in assembly and maintenance processesFluent in written and spoken English knowledgeGood command on SAP in the modules MM and PPIndependent and careful way of working as well as communication and team skillsCareful and thorough approach to work as well as coordination and organizational skillsWillingness to travelAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balanceInnovative solutions for the future of mobility and security Kapcsolattartó / InformationLuca-Piedl Bajáriluca.bajari@randstad.huKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Apply now!This opportunity is more than just a job!They provide the best innovative technology.
    Cégleírás / Organisation/DepartmentOur partner is one of the markets major, full-service providers in the defence sector. It covers logistical and tactical military vehicles both wheeled and tracked as well as combat vehicles and turret systems for armed forces the world over from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Groups Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles.Pozíció leírása / Job descriptionOperational management of the team Production Planning and Production ControlCreation of work plans and parts listsSpecification of internal or external processingPreparation of cost estimatesCreation and presentation of evaluations and reportingsOptimization of manufacturing processesPreparation of assembly instructions and standard work instructionsDefinition of production processes and value streams in Operations prior to production start-upFurther development of work preparation (e.g. creation of work plans, REFA, MTM and workplace design)Elvárások / RequirementsIndustrial engineering, production technology, mechanical engineering degree or comparable qualificationMinimum 2 years of professional experience in a position in the field of production engineering in a manufacturing companyStrong knowledge of lean management methods, work preparation, and logisticsGood knowledge in welding and in assembly and maintenance processesFluent in written and spoken English knowledgeGood command on SAP in the modules MM and PPIndependent and careful way of working as well as communication and team skillsCareful and thorough approach to work as well as coordination and organizational skillsWillingness to travelAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balanceInnovative solutions for the future of mobility and security Kapcsolattartó / InformationLuca-Piedl Bajáriluca.bajari@randstad.huKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Apply now!This opportunity is more than just a job!They provide the best innovative technology.
    • zalaegerszeg, zala
    • permanent
    Cégleírás / Organisation/DepartmentOur partner is one of the markets major, full-service providers in the defence sector. It covers logistical and tactical military vehicles both wheeled and tracked as well as combat vehicles and turret systems for armed forces the world over from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Groups Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionHead of the Planning, Control, and Project Management Operations departmentCost and budget responsibilityResponsibility for capacity and resource planning for productionDefinition of production processes and value streams in Operations prior to production start-upEnsuring knowledge transfer of production relevant know-how across multiple sitesResponsibility for lean management and IT infrastructure in operations as well as site developmentFurther development of work preparation (e.g. creation of work plans, REFA, MTM and workplace design) Elvárások / RequirementsIndustrial engineering, production technology, mechanical engineering degreeMinimum 4 years of professional experience in a management position in the field of production management and/or production management in a manufacturing companyStrong knowledge of lean management methods, project management as well as work preparation and logisticsProcess knowledge in welding and in assembly and maintenanceFluent in written and spoken in EnglishVery good SAP knowledge in the modules MM and PPIndependent and careful way of working as well as communication and team skillsWillingness to travelAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balanceInnovative solutions for the future of mobility and security Kapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job!They provide the best innovative technology.
    Cégleírás / Organisation/DepartmentOur partner is one of the markets major, full-service providers in the defence sector. It covers logistical and tactical military vehicles both wheeled and tracked as well as combat vehicles and turret systems for armed forces the world over from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Groups Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionHead of the Planning, Control, and Project Management Operations departmentCost and budget responsibilityResponsibility for capacity and resource planning for productionDefinition of production processes and value streams in Operations prior to production start-upEnsuring knowledge transfer of production relevant know-how across multiple sitesResponsibility for lean management and IT infrastructure in operations as well as site developmentFurther development of work preparation (e.g. creation of work plans, REFA, MTM and workplace design) Elvárások / RequirementsIndustrial engineering, production technology, mechanical engineering degreeMinimum 4 years of professional experience in a management position in the field of production management and/or production management in a manufacturing companyStrong knowledge of lean management methods, project management as well as work preparation and logisticsProcess knowledge in welding and in assembly and maintenanceFluent in written and spoken in EnglishVery good SAP knowledge in the modules MM and PPIndependent and careful way of working as well as communication and team skillsWillingness to travelAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balanceInnovative solutions for the future of mobility and security Kapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job!They provide the best innovative technology.
    • zalaegerszeg, zala
    • permanent
    Cégleírás / Organisation/DepartmentOur partner is one of the markets major, full-service providers in the defence sector. It covers logistical and tactical military vehicles both wheeled and tracked as well as combat vehicles and turret systems for armed forces the world over from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Groups Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionAll welding procedure development throughout all divisionsSolving welding related issues and making process improvementsProvide support to quality colleagues on issues related to welding and welding inspectionInterface with customers on customer visits/auditsPresents technical reporting and writing weld procedure specifications, and standard work instructionsMonitor weld leaks and visual defectsManage and work with multiple quality development supervisors who are in charge of training incoming weldersWork with robot technicians to solve robot welding issues and develop new robotic welding processesTroubleshoot welding problems related to the welding equipment or welding processWork with vendors on improving current welding equipment/supplies and experimenting with new technology as it becomes availableElvárások / RequirementsMinimum 2 years of experience in engineering roles in a technical or manufacturing environment, welding engineering or similar metal product processingDegree in Welding, Metallurgical, Materials Science, Mechanical or Chemical EngineeringRobot Programming knowledge is a plusAbility to work independently and prioritize problems/projectsCAD experienceBe proficient in using Microsoft Office including Word, PowerPoint, Excel and AccessEvaluate, apply and develop complex welding specificationsResearch and development experience in welding processesGood understanding of metallurgy principlesAbility to quickly adapt to new processes and materialsWillingness to travelExcellent knowledge of English languageAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balanceInnovative solutions for the future of mobility and security Kapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job!They provide the best innovative technology.
    Cégleírás / Organisation/DepartmentOur partner is one of the markets major, full-service providers in the defence sector. It covers logistical and tactical military vehicles both wheeled and tracked as well as combat vehicles and turret systems for armed forces the world over from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Groups Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionAll welding procedure development throughout all divisionsSolving welding related issues and making process improvementsProvide support to quality colleagues on issues related to welding and welding inspectionInterface with customers on customer visits/auditsPresents technical reporting and writing weld procedure specifications, and standard work instructionsMonitor weld leaks and visual defectsManage and work with multiple quality development supervisors who are in charge of training incoming weldersWork with robot technicians to solve robot welding issues and develop new robotic welding processesTroubleshoot welding problems related to the welding equipment or welding processWork with vendors on improving current welding equipment/supplies and experimenting with new technology as it becomes availableElvárások / RequirementsMinimum 2 years of experience in engineering roles in a technical or manufacturing environment, welding engineering or similar metal product processingDegree in Welding, Metallurgical, Materials Science, Mechanical or Chemical EngineeringRobot Programming knowledge is a plusAbility to work independently and prioritize problems/projectsCAD experienceBe proficient in using Microsoft Office including Word, PowerPoint, Excel and AccessEvaluate, apply and develop complex welding specificationsResearch and development experience in welding processesGood understanding of metallurgy principlesAbility to quickly adapt to new processes and materialsWillingness to travelExcellent knowledge of English languageAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balanceInnovative solutions for the future of mobility and security Kapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job!They provide the best innovative technology.
    • zalaegerszeg, zala
    • permanent
    Cégleírás / Organisation/DepartmentOur partner is one of the markets major, full-service providers in the defence sector. It covers logistical and tactical military vehicles both wheeled and tracked as well as combat vehicles and turret systems for armed forces the world over from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Groups Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles.Pozíció leírása / Job descriptionInterpret and implement design changesIntern./European welding certificateCreating work breakdown structure according to the specifications of service/work packageDescriptions and contractsCreating and maintaining master data, workplaces/plans, production bills of materials and planned times in SAPEntering and analyzing reports of findings from production to create cost estimatesMake or buy decisionsWorkplace design and process optimization Elvárások / RequirementsCompleted university degree in the field of mechanical engineering or comparableGood knowledge of MS Office and SAP R3At least 4 years of professional experience in a comparable positionVery good knowledge of EnglishHigh level of comprehension and communication skillsAnalytical, business management and methodical thinking and actionFlexibility, independent and team-oriented way of workingTechnical knowledge of welding is advantageousWillingness to travel in EuropeAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balance Innovative solutions for the future of mobility and securityKapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job!They provide the best innovative technology.
    Cégleírás / Organisation/DepartmentOur partner is one of the markets major, full-service providers in the defence sector. It covers logistical and tactical military vehicles both wheeled and tracked as well as combat vehicles and turret systems for armed forces the world over from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Groups Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles.Pozíció leírása / Job descriptionInterpret and implement design changesIntern./European welding certificateCreating work breakdown structure according to the specifications of service/work packageDescriptions and contractsCreating and maintaining master data, workplaces/plans, production bills of materials and planned times in SAPEntering and analyzing reports of findings from production to create cost estimatesMake or buy decisionsWorkplace design and process optimization Elvárások / RequirementsCompleted university degree in the field of mechanical engineering or comparableGood knowledge of MS Office and SAP R3At least 4 years of professional experience in a comparable positionVery good knowledge of EnglishHigh level of comprehension and communication skillsAnalytical, business management and methodical thinking and actionFlexibility, independent and team-oriented way of workingTechnical knowledge of welding is advantageousWillingness to travel in EuropeAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balance Innovative solutions for the future of mobility and securityKapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job!They provide the best innovative technology.
    • zalaegerszeg, zala
    • permanent
    Cégleírás / Organisation/DepartmentOur partner is one of the market’s major, full-service providers in the defence sector. It covers logistical and tactical military vehicles – both wheeled and tracked – as well as combat vehicles and turret systems for armed forces the world over – from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Group’s Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionCreation of corporate strategies in the area of materials management and their implementationAnalysis and organizational optimization of structures in the entire area of responsibilityResponsibility for HSE within logisticsManagement of operational purchasing incl. dunning and escalation managementExpediting with structured deployment and concepts on site with suppliersDevelopment of a future-oriented disposition incl. definition of optimal stock levels under consideration of delivery risks and tied-up capitalConceptual design of suitable in-plant logistics, with the aim of supporting stacked production including "kitting" of materialsPermanent optimization of material storage and material turnoverEstablishment of material traceability from goods receipt to delivery of complete assemblies / vehicles incl. packaging and customs clearanceCreation of complete data transparency in all ERP systemsDefinition, analysis and maintenance of KPIs and initiation of measures to improve the company's performanceDefinition of interface processes and information flows together with the departments and areas concernedElvárások / RequirementsSuccessfully completed technical or business studies (e.g. mechanical engineering or logistics) and / or comparable trainingAt least 2-3 years of professional and management experience in the field of materials managementExperience in the restructuring of processes and departments, as well as in the topic of employee management Confident handling of ERP systems and application programsProfound technical knowledge of business processes along the complete supply chainIn-depth and extensive knowledge of logistical processes as well as methods and toolsKnowledge in customs clearance of international shipments desirableCIP methodology competence, ideally with Lean Six Sigma experienceConfident appearance in communication, whether internal or external, as well as a team-oriented way of workingVery good English skills, both written and spoken, negotiation skillsAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balanceInnovative solutions for the future of mobility and security Kapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job!They provide the best innovative technology.
    Cégleírás / Organisation/DepartmentOur partner is one of the market’s major, full-service providers in the defence sector. It covers logistical and tactical military vehicles – both wheeled and tracked – as well as combat vehicles and turret systems for armed forces the world over – from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Group’s Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionCreation of corporate strategies in the area of materials management and their implementationAnalysis and organizational optimization of structures in the entire area of responsibilityResponsibility for HSE within logisticsManagement of operational purchasing incl. dunning and escalation managementExpediting with structured deployment and concepts on site with suppliersDevelopment of a future-oriented disposition incl. definition of optimal stock levels under consideration of delivery risks and tied-up capitalConceptual design of suitable in-plant logistics, with the aim of supporting stacked production including "kitting" of materialsPermanent optimization of material storage and material turnoverEstablishment of material traceability from goods receipt to delivery of complete assemblies / vehicles incl. packaging and customs clearanceCreation of complete data transparency in all ERP systemsDefinition, analysis and maintenance of KPIs and initiation of measures to improve the company's performanceDefinition of interface processes and information flows together with the departments and areas concernedElvárások / RequirementsSuccessfully completed technical or business studies (e.g. mechanical engineering or logistics) and / or comparable trainingAt least 2-3 years of professional and management experience in the field of materials managementExperience in the restructuring of processes and departments, as well as in the topic of employee management Confident handling of ERP systems and application programsProfound technical knowledge of business processes along the complete supply chainIn-depth and extensive knowledge of logistical processes as well as methods and toolsKnowledge in customs clearance of international shipments desirableCIP methodology competence, ideally with Lean Six Sigma experienceConfident appearance in communication, whether internal or external, as well as a team-oriented way of workingVery good English skills, both written and spoken, negotiation skillsAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balanceInnovative solutions for the future of mobility and security Kapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job!They provide the best innovative technology.
    • zalaegerszeg, zala
    • permanent
    Cégleírás / Organisation/DepartmentOur partner is one of the market’s major, full-service providers in the defence sector. It covers logistical and tactical military vehicles – both wheeled and tracked – as well as combat vehicles and turret systems for armed forces the world over – from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Group’s Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionOverall responsibility for the introduction, support and further development of LEAN management principles at the plantProcess analyses, identification of improvement potentials as well as implementation of measures derived therefromIndependent execution of optimization projects and workshopsPlanning and execution of Lean Assessments at different locationsSupport of the plant in the implementation of the roadmaps resulting from the assessmentsElaboration of Lean concepts and further development of methods and standardsKnowledge transfer within the division-wide lean organizationTraining of employees and managersElvárások / RequirementsMechanical engineering, industrial engineering degree or similar degreeMinimum 3 years experience in the planning and design of processes in the manufacturing industryExperience in project management desirableLean Six Sigma Green Belt certification and SAP knowledge is an advantageConfident handling of common MS-Office applicationsGood command of written and spoken EnglishIndependent and structured way of workingSociability and social competence on different hierarchical levelsWillingness to travelAmit kínálunk / OfferCompetitive compensation packageCreative and dynamic working environmentFlexible working time modelsEnsuring work-life balanceInnovative solutions for the future of mobility, securityKapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job!They provide the best innovative technology.
    Cégleírás / Organisation/DepartmentOur partner is one of the market’s major, full-service providers in the defence sector. It covers logistical and tactical military vehicles – both wheeled and tracked – as well as combat vehicles and turret systems for armed forces the world over – from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Group’s Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionOverall responsibility for the introduction, support and further development of LEAN management principles at the plantProcess analyses, identification of improvement potentials as well as implementation of measures derived therefromIndependent execution of optimization projects and workshopsPlanning and execution of Lean Assessments at different locationsSupport of the plant in the implementation of the roadmaps resulting from the assessmentsElaboration of Lean concepts and further development of methods and standardsKnowledge transfer within the division-wide lean organizationTraining of employees and managersElvárások / RequirementsMechanical engineering, industrial engineering degree or similar degreeMinimum 3 years experience in the planning and design of processes in the manufacturing industryExperience in project management desirableLean Six Sigma Green Belt certification and SAP knowledge is an advantageConfident handling of common MS-Office applicationsGood command of written and spoken EnglishIndependent and structured way of workingSociability and social competence on different hierarchical levelsWillingness to travelAmit kínálunk / OfferCompetitive compensation packageCreative and dynamic working environmentFlexible working time modelsEnsuring work-life balanceInnovative solutions for the future of mobility, securityKapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job!They provide the best innovative technology.
    • zalaegerszeg, zala
    • permanent
    Cégleírás / Organisation/DepartmentOur partner is one of the market’s major, full-service providers in the defence sector. It covers logistical and tactical military vehicles – both wheeled and tracked – as well as combat vehicles and turret systems for armed forces the world over – from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Group’s Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionManagement of employees in the design engineering department Built up the team, cost center responsibility Design and development of tracked and wheeled based military vehicles, mission kits, turrets. upgrade, modernization and obsolescence projectsPartial disciplines are structure design, hydraulic, powertrain, running gear, AirCon, protection, packaging engineering, automotive, simulation, etc.Execution of design projects in tool, fixture and special machine construction including necessary calculations Project management (project and schedule planning, control of internal and external service providers) Further development and optimization of existing designs Close Cooperation with Engineering Teams in Germany (UK and Australia) and with other functional and specialist departments (Project, Purchasing, Quality, Production, etc.)High level of understanding of the overall systemClose cooperation with engineering teams in foreign countries, especially in GermanyElvárások / RequirementsCompleted technical studies (e.g. mechanical engineering)Minimum 3-5 years of professional experience as a design engineer or head of a design department in the field of special machines and/or toolmaking Good knowledge of control techniques: hydraulic, pneumatic, electrical and mechanical Experience with CAD systems, experience with CAD – CAMExcellent knowledge of English language MS Office, MS Project, SAP knowledge Willingness to travel (Germany) about 3-5 days within one monthOpen mindset, team player, project, time schedule mentalityBackground in Heavy Machines-, Automotive- or similar industry sectors would be beneficialProfit-Center mentalityAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balanceInnovative solutions for the future of mobility and securityKapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job!Rheinmetall wants the best innovative technology.
    Cégleírás / Organisation/DepartmentOur partner is one of the market’s major, full-service providers in the defence sector. It covers logistical and tactical military vehicles – both wheeled and tracked – as well as combat vehicles and turret systems for armed forces the world over – from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Group’s Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionManagement of employees in the design engineering department Built up the team, cost center responsibility Design and development of tracked and wheeled based military vehicles, mission kits, turrets. upgrade, modernization and obsolescence projectsPartial disciplines are structure design, hydraulic, powertrain, running gear, AirCon, protection, packaging engineering, automotive, simulation, etc.Execution of design projects in tool, fixture and special machine construction including necessary calculations Project management (project and schedule planning, control of internal and external service providers) Further development and optimization of existing designs Close Cooperation with Engineering Teams in Germany (UK and Australia) and with other functional and specialist departments (Project, Purchasing, Quality, Production, etc.)High level of understanding of the overall systemClose cooperation with engineering teams in foreign countries, especially in GermanyElvárások / RequirementsCompleted technical studies (e.g. mechanical engineering)Minimum 3-5 years of professional experience as a design engineer or head of a design department in the field of special machines and/or toolmaking Good knowledge of control techniques: hydraulic, pneumatic, electrical and mechanical Experience with CAD systems, experience with CAD – CAMExcellent knowledge of English language MS Office, MS Project, SAP knowledge Willingness to travel (Germany) about 3-5 days within one monthOpen mindset, team player, project, time schedule mentalityBackground in Heavy Machines-, Automotive- or similar industry sectors would be beneficialProfit-Center mentalityAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balanceInnovative solutions for the future of mobility and securityKapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job!Rheinmetall wants the best innovative technology.
    • zalaegerszeg, zala
    • permanent
    Cégleírás / Organisation/DepartmentOur partner is one of the market’s major, full-service providers in the defence sector. It covers logistical and tactical military vehicles – both wheeled and tracked – as well as combat vehicles and turret systems for armed forces the world over – from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Group’s Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionConcept development for mechanical assemblies/design studies Mix of computer based work and project meeting, support of prototype teams within the workshopDefinition and coordination of space claims in Siemens NX Design and control of customer-specific equipment Preparation of specifications for mechanical assemblies for the assignment of subcontractors Checking the work results of subcontractors and internal specialist departments including tolerance analysis, collision checks etc Analysis and evaluation of changes for system compatibility Supervision of the production during the construction of prototypesImplementation of internal design reviews and management of weight balancesConstruction and testing of CAD/PDM article structures Close Cooperation with Engineering Teams in Germany (UK and Australia) and with other functional and specialist departments (Project, Purchasing, Quality, Production, etc.)High level of understanding of the overall systemElvárások / RequirementsCompleted university studies in the field of mechanical engineering2-3 years of professional experience and profound knowledge in the field of mechanical developments Interest in actively designing the customer-oriented development resultVery good knowledge of PDM, Siemens NX, DOORS and MS Office, CAD toolsIndependent and structured way of working Excellent written and spoken English skills Willingness to travel (Germany) within 3 days within one monthOpen mindset, team player and budget orientated personalityADVANTAGE German language skills Background in Heavy Machines-, Automotive- or similar industry sectors would be beneficialAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balance Innovative solutions for the future of mobility and securityKapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job.Rheinmetall wants the best innovative technology.
    Cégleírás / Organisation/DepartmentOur partner is one of the market’s major, full-service providers in the defence sector. It covers logistical and tactical military vehicles – both wheeled and tracked – as well as combat vehicles and turret systems for armed forces the world over – from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Group’s Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionConcept development for mechanical assemblies/design studies Mix of computer based work and project meeting, support of prototype teams within the workshopDefinition and coordination of space claims in Siemens NX Design and control of customer-specific equipment Preparation of specifications for mechanical assemblies for the assignment of subcontractors Checking the work results of subcontractors and internal specialist departments including tolerance analysis, collision checks etc Analysis and evaluation of changes for system compatibility Supervision of the production during the construction of prototypesImplementation of internal design reviews and management of weight balancesConstruction and testing of CAD/PDM article structures Close Cooperation with Engineering Teams in Germany (UK and Australia) and with other functional and specialist departments (Project, Purchasing, Quality, Production, etc.)High level of understanding of the overall systemElvárások / RequirementsCompleted university studies in the field of mechanical engineering2-3 years of professional experience and profound knowledge in the field of mechanical developments Interest in actively designing the customer-oriented development resultVery good knowledge of PDM, Siemens NX, DOORS and MS Office, CAD toolsIndependent and structured way of working Excellent written and spoken English skills Willingness to travel (Germany) within 3 days within one monthOpen mindset, team player and budget orientated personalityADVANTAGE German language skills Background in Heavy Machines-, Automotive- or similar industry sectors would be beneficialAmit kínálunk / OfferCompetitive compensation package Creative and dynamic working environment Flexible working time models Ensuring work-life balance Innovative solutions for the future of mobility and securityKapcsolattartó / InformationKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Luca-Piedl Bajáriluca.bajari@randstad.huApply now!This opportunity is more than just a job.Rheinmetall wants the best innovative technology.
    • zalaegerszeg, zala
    • permanent
    Cégleírás / Organisation/DepartmentOur partner is one of the market’s major, full-service providers in the defence sector. It covers logistical and tactical military vehicles – both wheeled and tracked – as well as combat vehicles and turret systems for armed forces the world over – from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Group’s Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionCreation of customer-specific training documentation in HTML5Managing training content Correct interpretation of technical informationTranslation from technical English in Hungarian Creating and maintaining master data for service material in PLM and SAPConversion, updating, and maintenance of existing catalogue dataMaintenance and preparation of training documentation for maintenance, service, user and production trainingYou’ll be working in a small team within training department, which is tasked with bringing the KnowHow for the production of the brand-new Lynx vehicle to our Hungarian plant. The task of the team is to create trainings and training documentation to transfer the production knowledge to Hungary, ensure a smooth and fast start of production and facilitate a thriving learning environment for our new employees.Elvárások / RequirementsMedia designer or technical editorSeveral years of professional experienceProfound knowledge of HTML5 and/or graphic designKnowledge of automated process control systems (MS Office, PDM systems, SAP)Basic knowledge of the industryGood technical understanding and terminology Excellent written and spoken English and good written GermanDistinct professionalism and technical competenceKnowledge of automated process control systems (MS Office, PDM systems,SAP, Doors, UG/Catia PDM)Amit kínálunk / OfferCreative and dynamic working environment Competitive compensation package Flexible working time models Ensuring work-life balance Innovative solution for the future of mobility and securityKapcsolattartó / Informationluca.bajari@randstad.huklaudia.ruzsinszky@randstad.huApply now!This opportunity is more than just a job.Rheinmetall wants the best innovative technology.
    Cégleírás / Organisation/DepartmentOur partner is one of the market’s major, full-service providers in the defence sector. It covers logistical and tactical military vehicles – both wheeled and tracked – as well as combat vehicles and turret systems for armed forces the world over – from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Group’s Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionCreation of customer-specific training documentation in HTML5Managing training content Correct interpretation of technical informationTranslation from technical English in Hungarian Creating and maintaining master data for service material in PLM and SAPConversion, updating, and maintenance of existing catalogue dataMaintenance and preparation of training documentation for maintenance, service, user and production trainingYou’ll be working in a small team within training department, which is tasked with bringing the KnowHow for the production of the brand-new Lynx vehicle to our Hungarian plant. The task of the team is to create trainings and training documentation to transfer the production knowledge to Hungary, ensure a smooth and fast start of production and facilitate a thriving learning environment for our new employees.Elvárások / RequirementsMedia designer or technical editorSeveral years of professional experienceProfound knowledge of HTML5 and/or graphic designKnowledge of automated process control systems (MS Office, PDM systems, SAP)Basic knowledge of the industryGood technical understanding and terminology Excellent written and spoken English and good written GermanDistinct professionalism and technical competenceKnowledge of automated process control systems (MS Office, PDM systems,SAP, Doors, UG/Catia PDM)Amit kínálunk / OfferCreative and dynamic working environment Competitive compensation package Flexible working time models Ensuring work-life balance Innovative solution for the future of mobility and securityKapcsolattartó / Informationluca.bajari@randstad.huklaudia.ruzsinszky@randstad.huApply now!This opportunity is more than just a job.Rheinmetall wants the best innovative technology.
    • zalaegerszeg, zala
    • permanent
    Cégleírás / Organisation/DepartmentOur partner is one of the market’s major, full-service providers in the defence sector. It covers logistical and tactical military vehicles – both wheeled and tracked – as well as combat vehicles and turret systems for armed forces the world over – from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Group’s Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionAnalysis, identification, and specification of system requirements and system interfaces Technical leadership of technical development teams Carrying out requirements analysis and management Preparation of specifications and verification documentsPreparation of system architecturesSystems engineering competence with a high demand on requirements based engineering work and verification as well validation of the development resultsHigh level of understanding of the overall systemClose Cooperation with Engineering Teams in Germany (UK and Australia) and with other functional and specialist departments (Project, Purchasing, Quality, Production, etc.).Elvárások / RequirementsSeveral years of experience in the field of systems engineering Completed studies in a technical or scientific field, e.g. mechanical engineering, electrical engineering, physics and similarBackground in Heavy Machines-, Automotive- or similar industry sectors would be beneficialGood knowledge of system modelling Ideally knowledge from the military environment Very good written and spoken English Willingness to travel internationally Amit kínálunk / OfferCreative and dynamic working environment Competitive compensation package Flexible working time models Ensuring work-life balance Innovative solutions for the future of mobility and securityKapcsolattartó / InformationLuca-Piedl Bajáriluca.bajari@randstad.huKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Apply now!This opportunity is more than just a job.Rheinmetall wants the best innovative technology.
    Cégleírás / Organisation/DepartmentOur partner is one of the market’s major, full-service providers in the defence sector. It covers logistical and tactical military vehicles – both wheeled and tracked – as well as combat vehicles and turret systems for armed forces the world over – from end to end and from a single source.Their group is a listed stock corporation based in Düsseldorf, Germany. The Group’s Defence Sector is a leading European systems supplier for defence technology and a trusted partner of the armed forces. This is the first unique factory to be built in Europe in Zalaegerszeg using visionary AI technology and which focuses on modern equipment for the armed forces. They developed the LYNX. It is the new generation of vehicles. Pozíció leírása / Job descriptionAnalysis, identification, and specification of system requirements and system interfaces Technical leadership of technical development teams Carrying out requirements analysis and management Preparation of specifications and verification documentsPreparation of system architecturesSystems engineering competence with a high demand on requirements based engineering work and verification as well validation of the development resultsHigh level of understanding of the overall systemClose Cooperation with Engineering Teams in Germany (UK and Australia) and with other functional and specialist departments (Project, Purchasing, Quality, Production, etc.).Elvárások / RequirementsSeveral years of experience in the field of systems engineering Completed studies in a technical or scientific field, e.g. mechanical engineering, electrical engineering, physics and similarBackground in Heavy Machines-, Automotive- or similar industry sectors would be beneficialGood knowledge of system modelling Ideally knowledge from the military environment Very good written and spoken English Willingness to travel internationally Amit kínálunk / OfferCreative and dynamic working environment Competitive compensation package Flexible working time models Ensuring work-life balance Innovative solutions for the future of mobility and securityKapcsolattartó / InformationLuca-Piedl Bajáriluca.bajari@randstad.huKlaudia Ruzsinszky dr.klaudia.ruzsinszky@randstad.hu Apply now!This opportunity is more than just a job.Rheinmetall wants the best innovative technology.

explore over 152582 jobs with randstad.

It looks like you want to switch your language. This will reset your filters on your current job search.