Our leading client is looking for an engineer for their projects who is a registered EIT and wants to learn and grow in the field. This is a 12-months contract role.
General Description
• The E2 – Engineer performs supervised engineering tasks for assignments of limited scope and complexity using standard procedures and techniques to support projects and/or operations at company safely, with quality, within budget, and on time.
...
Advantages
This is an opportunity to work for a renowned company at a competitive pay rate.
NOTE: The rate range mentioned is NOT for INC candidates. The range for INC candidates is $40-60/hr. depending on the experience level.
E1 candidates are welcome to apply as well.
Responsibilities
Experience and Role Accountabilities
• A minimum two (2) years of in a relevant engineering field or equivalent.
• Contribute to the development of safe engineering solutions by performing activities such as studies of limited scope and applying prescribed methods and techniques in solving problems for projects and/or operations.
• Assist with specific aspects of more complex engineering activities adhering to prescribed analysis, design, or computation methods by following established practices working under close supervision of a senior professional engineer who reviews work for accuracy, adequacy, and conformance with prescribed procedures.
• Participate in company’s engineering practice using initiative and judgement in making a few routine technical decisions, applying standards and following detailed instructions so that company’s engineering standards are maintained.
• Perform periodic tasks independently which may include on-site construction quality control and monitoring to ensure design compliance.
• EGBC Registrants provided to company through this contract shall work under company’s Professional Practice Management Plan, Quality Management Pillar. The Registrant shall apply their own or their firm’s Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during the course of their contract with company will be retained by company to satisfy EGBC Bylaws.
Role specialty: Electrical - Power System (Protection, Control, and Telecom)
Duties:
-Facilitates meetings with defined scope, clearly communicates the intent and can follow up on identified solutions with key stakeholders until resolved.
-Identify technical and unique design and field engineering problems and escalate and engage appropriate stakeholders for collaboration discussions to fulfill NERC CIP compliance requirements and to support successful operations and/or project completion at company.
-Sustains and monitors existing CIP compliance processes and workflows, procedures, and quality assurance practices. Ensures adherence to NERC CIP requirements, BC Hydro and industry standards, policies, practices, and procedures. This involves participating in violation investigations, sequence of events, and violation mitigation plan deliverables or internal compliance assurance activities.
-Participates and conducts annual CIP Compliance activities and deliverables (e.g. self-certification, audit, vulnerability assessment, etc.)
-Coordinates technical work activities, provides instructions, advice and technical guidance to other engineers, project, technical and administrative staff.
-Peer reviews work of other engineers or designers to ensure accuracy, achievement of required results, and adherence to NERC CIP compliance practices.
- Resolves site queries, reviewing field evidence, and issuing connection coversheets during the construction phase of projects.
-Maintains complete compliance documentation with respect to Transmission Stations NERC CIP processes, including all attestations, field records, and key documents.
-Fulfills functional role of CIP Compliance Engineer as assigned, maintains appropriate commitments to project teams, and coordinates compliance activities with multi-disciplined project team.
-Inventory and progress workflows in Compliance System (Sigma Flow 2.0)
Qualifications
Role Profile:
Must haves:
• A minimum two (2) years in a relevant engineering field or equivalent.
• University graduate in applied science or engineering
• Registered Engineer-in-Training or Geoscientist-in-Training with Engineers & Geoscientists BC or another jurisdiction and/or eligible for registration as such with Engineers & Geoscientists BC
• Strong communications (verbal and written), technical writing, interpersonal, and presentation skills are required.
Nice to haves:
- Preferred areas of study include computer engineering, control systems, telecommunications, systems engineering, or power engineering.
- Candidates with lower qualifications may be considered and evaluated for placement in associated positions at a lower level.
- Experience in NERC CIP compliance and cybersecurity for industrial control systems (ICS) infrastructure/environment is an asset.
- Prior experience with Microsoft Excel Virtual Basic for Applications, Microsoft Access, data analytics, scripting in PowerShell or Python, and port scanning of Operation Technology devices preferred.
Education and Skills
• University graduate in applied science or engineering
• Registered Engineer-in-Training or Geoscientist-in-Training with Engineers & Geoscientists BC or another jurisdiction and/or eligible for registration as such with Engineers & Geoscientists BC
• Familiarity with CAD systems and drawing standards
• Ability to use standard industry design/analysis software
• Intermediate MS Office skills (Word, Excel, and PowerPoint)
• Intermediate English skills for professional environment, written and spoken
Qualifications:
- Preferred areas of study include computer engineering, control systems, telecommunications, systems engineering, or power engineering.
- Candidates with lower qualifications may be considered and evaluated for placement in associated positions at a lower level.
- Experience in NERC CIP compliance and cybersecurity for industrial control systems (ICS) infrastructure/environment is an asset.
- Strong communications (verbal and written), technical writing, interpersonal, and presentation skills are required.
- Good understanding of project and task management processes.
- Prior experience with Microsoft Excel Virtual Basic for Applications, Microsoft Access, data analytics, scripting in PowerShell or Python, and port scanning of Operation Technology devices preferred.
- Strong organizational skills and detail oriented.
Summary
Location: Edmonds, Hybrid
Interested candidates can directly submit their resumes to Kiranmai at kiranmai.annaldevi@randstad.ca
Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.
Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
show more
Our leading client is looking for an engineer for their projects who is a registered EIT and wants to learn and grow in the field. This is a 12-months contract role.
General Description
• The E2 – Engineer performs supervised engineering tasks for assignments of limited scope and complexity using standard procedures and techniques to support projects and/or operations at company safely, with quality, within budget, and on time.
Advantages
This is an opportunity to work for a renowned company at a competitive pay rate.
NOTE: The rate range mentioned is NOT for INC candidates. The range for INC candidates is $40-60/hr. depending on the experience level.
E1 candidates are welcome to apply as well.
Responsibilities
Experience and Role Accountabilities
• A minimum two (2) years of in a relevant engineering field or equivalent.
• Contribute to the development of safe engineering solutions by performing activities such as studies of limited scope and applying prescribed methods and techniques in solving problems for projects and/or operations.
...
• Assist with specific aspects of more complex engineering activities adhering to prescribed analysis, design, or computation methods by following established practices working under close supervision of a senior professional engineer who reviews work for accuracy, adequacy, and conformance with prescribed procedures.
• Participate in company’s engineering practice using initiative and judgement in making a few routine technical decisions, applying standards and following detailed instructions so that company’s engineering standards are maintained.
• Perform periodic tasks independently which may include on-site construction quality control and monitoring to ensure design compliance.
• EGBC Registrants provided to company through this contract shall work under company’s Professional Practice Management Plan, Quality Management Pillar. The Registrant shall apply their own or their firm’s Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during the course of their contract with company will be retained by company to satisfy EGBC Bylaws.
Role specialty: Electrical - Power System (Protection, Control, and Telecom)
Duties:
-Facilitates meetings with defined scope, clearly communicates the intent and can follow up on identified solutions with key stakeholders until resolved.
-Identify technical and unique design and field engineering problems and escalate and engage appropriate stakeholders for collaboration discussions to fulfill NERC CIP compliance requirements and to support successful operations and/or project completion at company.
-Sustains and monitors existing CIP compliance processes and workflows, procedures, and quality assurance practices. Ensures adherence to NERC CIP requirements, BC Hydro and industry standards, policies, practices, and procedures. This involves participating in violation investigations, sequence of events, and violation mitigation plan deliverables or internal compliance assurance activities.
-Participates and conducts annual CIP Compliance activities and deliverables (e.g. self-certification, audit, vulnerability assessment, etc.)
-Coordinates technical work activities, provides instructions, advice and technical guidance to other engineers, project, technical and administrative staff.
-Peer reviews work of other engineers or designers to ensure accuracy, achievement of required results, and adherence to NERC CIP compliance practices.
- Resolves site queries, reviewing field evidence, and issuing connection coversheets during the construction phase of projects.
-Maintains complete compliance documentation with respect to Transmission Stations NERC CIP processes, including all attestations, field records, and key documents.
-Fulfills functional role of CIP Compliance Engineer as assigned, maintains appropriate commitments to project teams, and coordinates compliance activities with multi-disciplined project team.
-Inventory and progress workflows in Compliance System (Sigma Flow 2.0)
Qualifications
Role Profile:
Must haves:
• A minimum two (2) years in a relevant engineering field or equivalent.
• University graduate in applied science or engineering
• Registered Engineer-in-Training or Geoscientist-in-Training with Engineers & Geoscientists BC or another jurisdiction and/or eligible for registration as such with Engineers & Geoscientists BC
• Strong communications (verbal and written), technical writing, interpersonal, and presentation skills are required.
Nice to haves:
- Preferred areas of study include computer engineering, control systems, telecommunications, systems engineering, or power engineering.
- Candidates with lower qualifications may be considered and evaluated for placement in associated positions at a lower level.
- Experience in NERC CIP compliance and cybersecurity for industrial control systems (ICS) infrastructure/environment is an asset.
- Prior experience with Microsoft Excel Virtual Basic for Applications, Microsoft Access, data analytics, scripting in PowerShell or Python, and port scanning of Operation Technology devices preferred.
Education and Skills
• University graduate in applied science or engineering
• Registered Engineer-in-Training or Geoscientist-in-Training with Engineers & Geoscientists BC or another jurisdiction and/or eligible for registration as such with Engineers & Geoscientists BC
• Familiarity with CAD systems and drawing standards
• Ability to use standard industry design/analysis software
• Intermediate MS Office skills (Word, Excel, and PowerPoint)
• Intermediate English skills for professional environment, written and spoken
Qualifications:
- Preferred areas of study include computer engineering, control systems, telecommunications, systems engineering, or power engineering.
- Candidates with lower qualifications may be considered and evaluated for placement in associated positions at a lower level.
- Experience in NERC CIP compliance and cybersecurity for industrial control systems (ICS) infrastructure/environment is an asset.
- Strong communications (verbal and written), technical writing, interpersonal, and presentation skills are required.
- Good understanding of project and task management processes.
- Prior experience with Microsoft Excel Virtual Basic for Applications, Microsoft Access, data analytics, scripting in PowerShell or Python, and port scanning of Operation Technology devices preferred.
- Strong organizational skills and detail oriented.
Summary
Location: Edmonds, Hybrid
Interested candidates can directly submit their resumes to Kiranmai at kiranmai.annaldevi@randstad.ca
Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.
Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
show more
