You are successfully logged out of your my randstad account

You have successfully deleted your account

35 jobs found in North York, Ontario - Page 2

filter4
clear all
page 2
    • ottawa, ontario
    • contract
    Under the supervision of the Manager, Maintenance/ Lead Technicians; the Equipment Technician’s primary responsibility is to support and perform maintenance of all Manufacturing equipment and related equipment issues. Duties and Responsibilities•Provides support and performs maintenance for all card Manufacturing equipment & related issues. Monitor, maintain and calibrate equipment in areas such as the card assembly line, HVAC units for card line enclosure, building air compressor, in according with approved procedures•Provides support to daily card production, R&D experiments and potential future projects•Assists in the determination of root cause of failures and problems with automation equipment. Communicates effectively, verbally and in writing, to various groups affiliated with card manufacturing•Assesses multiple process variables and their interactions and then provides a reasoned, rapid response to issues revealed by test results•Troubleshooting and repair of equipment failures and operational problems•Documentation of equipment maintenance activities in maintenance logs •Performs calibration procedures•Provides support as required for equipment mechanical and control system issues•Communicates equipment-related issues with Manufacturing and Mechanical Engineering•Creates consumables used in certain automated operations•Complies with documentation requirements to ensure equipment and production records are completed accuratelyAdvantagesKey Contacts•Reports directly to Manager, Maintenance.•Perform shift duties assigned by Lead technician.•Frequent interaction with engineers, Lead technicians, and card production operatorsResponsibilities•Flexibility to work overtime and on different shifts as required•Noisy and fast-paced manufacturing environment•Ability to work independently and take appropriate action as required•Flexibility to respond to a changing and evolving environment including the ability to interact effectively with all levels of the organization •Ability to participate in process, product, equipment, and component validations and verifications (e.g. new product introductions)•Adheres to change control protocols and maintenance procedures typical of medical device manufacturing settings•Excellent oral and written communication skills •Ability to work effectively in a team environment while satisfying personal responsibilities•Ready to speak up about concerns•PhysicaloManual dexterity oAbility to distinguish between coloursoExtended periods of standing and walkingoOccasional kneeling and crouchingQualifications•[Mechanical or Electrical Technician Diploma and/or an acceptable combination of education and experience •Mechanical and/or automation aptitude toward equipment troubleshooting and root cause analysis is considered as key asset•Familiarity with operation, assembly, and maintenance of electro-mechanical equipment•Experience working in a medical device manufacturing or electronic manufacturing setting is considered an asset•Proficient knowledge of MS Office (Word, Excel, Outlook, etc.)SummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
    Under the supervision of the Manager, Maintenance/ Lead Technicians; the Equipment Technician’s primary responsibility is to support and perform maintenance of all Manufacturing equipment and related equipment issues. Duties and Responsibilities•Provides support and performs maintenance for all card Manufacturing equipment & related issues. Monitor, maintain and calibrate equipment in areas such as the card assembly line, HVAC units for card line enclosure, building air compressor, in according with approved procedures•Provides support to daily card production, R&D experiments and potential future projects•Assists in the determination of root cause of failures and problems with automation equipment. Communicates effectively, verbally and in writing, to various groups affiliated with card manufacturing•Assesses multiple process variables and their interactions and then provides a reasoned, rapid response to issues revealed by test results•Troubleshooting and repair of equipment failures and operational problems•Documentation of equipment maintenance activities in maintenance logs •Performs calibration procedures•Provides support as required for equipment mechanical and control system issues•Communicates equipment-related issues with Manufacturing and Mechanical Engineering•Creates consumables used in certain automated operations•Complies with documentation requirements to ensure equipment and production records are completed accuratelyAdvantagesKey Contacts•Reports directly to Manager, Maintenance.•Perform shift duties assigned by Lead technician.•Frequent interaction with engineers, Lead technicians, and card production operatorsResponsibilities•Flexibility to work overtime and on different shifts as required•Noisy and fast-paced manufacturing environment•Ability to work independently and take appropriate action as required•Flexibility to respond to a changing and evolving environment including the ability to interact effectively with all levels of the organization •Ability to participate in process, product, equipment, and component validations and verifications (e.g. new product introductions)•Adheres to change control protocols and maintenance procedures typical of medical device manufacturing settings•Excellent oral and written communication skills •Ability to work effectively in a team environment while satisfying personal responsibilities•Ready to speak up about concerns•PhysicaloManual dexterity oAbility to distinguish between coloursoExtended periods of standing and walkingoOccasional kneeling and crouchingQualifications•[Mechanical or Electrical Technician Diploma and/or an acceptable combination of education and experience •Mechanical and/or automation aptitude toward equipment troubleshooting and root cause analysis is considered as key asset•Familiarity with operation, assembly, and maintenance of electro-mechanical equipment•Experience working in a medical device manufacturing or electronic manufacturing setting is considered an asset•Proficient knowledge of MS Office (Word, Excel, Outlook, etc.)SummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
    • concord, ontario
    • permanent
    Our client is a manufacturer of plastic films products designed for the food, packaging, consumer and industrial wrapping industry. They have partnered with Randstad to support them in the Maintenance Manager role.Position: Maintenance Manager Location - Concord, ONSalary - Salary Depends On ExperienceReports to: General ManagerIndustry – Plastic Blow FilmsFull time & permanent positionSummary: Manages all activities related to the maintenance and repair of machinery and equipment.If you are interested in this opportunity send your resume directly to Bhabi Neupane at Bhabi.Neupane@randstad.caAdvantagesBenefits:• Casual dress• Dental care• Extended health care• Life insurance• On-site parkingSchedule:• 8-hour shift• Monday to Friday• Exceptional opportunity for personal growth and development;ResponsibilitiesDuties & Responsibilities: •Directs staff in the maintenance and repair of machinery and equipment.•Develops implements and monitors preventative maintenance programs.•Assists in troubleshooting mechanical and electrical problems as required.•Participates in daily production and maintenance meetings.•Participates in recruitment and orients new staff.•Provides direction, motivation and coaching to staff. Manages employee performance as required.•Communicates daily with staff to ensure communication of all information required to perform their functions.•Support continuous improvement initiatives by planning and executing equipment installations, moves, or reconfigurations.•Implement TPM activities and lean manufacturing concepts.•Ensure the highest level of safety and quality standards are met with each project•Work with Director of Operations and area managers on work requests for approval and scheduling•Complete all KPI monthly reports accurately and as per month-end deadlines.•Be able to provide after-hours support and guidance to the maintenance mechanic/Electrician.•Consults with and manages external contractors. •May source or assist in sourcing parts as required.•Adhere to company policies, procedures, safety, and other standards including BSCI.•Understands and complies with legislated duties and responsibilities as it pertains to Supervisors under the OHSA.•Understands and complies with all Company Safety Rules and processes.•Understand and comply with all HACCP and GMP policies.•Completes all required documentation and paperwork.•Performs other duties as assigned.QualificationsRequirements:•Post-Secondary Education in Mechanical or Electrical Engineering•Licensed Electrician is an asset but not must have•Strong knowledge of Preventative Maintenance planning and CMMS to issue work orders to the maintenance team.•5 +years' experience in a maintenance management role•Knowledge of blown film extrusion machinery, injection moulding, PLC, VFD and downstream equipment is an asset•Proficient computer skills including a working knowledge of excel, and word processing software.•Excellent communication and team skills.SummaryIf you are interested in this opportunity send your resume directly to Bhabi Neupane at Bhabi.Neupane@randstad.caRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
    Our client is a manufacturer of plastic films products designed for the food, packaging, consumer and industrial wrapping industry. They have partnered with Randstad to support them in the Maintenance Manager role.Position: Maintenance Manager Location - Concord, ONSalary - Salary Depends On ExperienceReports to: General ManagerIndustry – Plastic Blow FilmsFull time & permanent positionSummary: Manages all activities related to the maintenance and repair of machinery and equipment.If you are interested in this opportunity send your resume directly to Bhabi Neupane at Bhabi.Neupane@randstad.caAdvantagesBenefits:• Casual dress• Dental care• Extended health care• Life insurance• On-site parkingSchedule:• 8-hour shift• Monday to Friday• Exceptional opportunity for personal growth and development;ResponsibilitiesDuties & Responsibilities: •Directs staff in the maintenance and repair of machinery and equipment.•Develops implements and monitors preventative maintenance programs.•Assists in troubleshooting mechanical and electrical problems as required.•Participates in daily production and maintenance meetings.•Participates in recruitment and orients new staff.•Provides direction, motivation and coaching to staff. Manages employee performance as required.•Communicates daily with staff to ensure communication of all information required to perform their functions.•Support continuous improvement initiatives by planning and executing equipment installations, moves, or reconfigurations.•Implement TPM activities and lean manufacturing concepts.•Ensure the highest level of safety and quality standards are met with each project•Work with Director of Operations and area managers on work requests for approval and scheduling•Complete all KPI monthly reports accurately and as per month-end deadlines.•Be able to provide after-hours support and guidance to the maintenance mechanic/Electrician.•Consults with and manages external contractors. •May source or assist in sourcing parts as required.•Adhere to company policies, procedures, safety, and other standards including BSCI.•Understands and complies with legislated duties and responsibilities as it pertains to Supervisors under the OHSA.•Understands and complies with all Company Safety Rules and processes.•Understand and comply with all HACCP and GMP policies.•Completes all required documentation and paperwork.•Performs other duties as assigned.QualificationsRequirements:•Post-Secondary Education in Mechanical or Electrical Engineering•Licensed Electrician is an asset but not must have•Strong knowledge of Preventative Maintenance planning and CMMS to issue work orders to the maintenance team.•5 +years' experience in a maintenance management role•Knowledge of blown film extrusion machinery, injection moulding, PLC, VFD and downstream equipment is an asset•Proficient computer skills including a working knowledge of excel, and word processing software.•Excellent communication and team skills.SummaryIf you are interested in this opportunity send your resume directly to Bhabi Neupane at Bhabi.Neupane@randstad.caRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
    • hannon, ontario
    • permanent
    Our client is Hannon that manufactures water filtration systems is looking for a PLC Technician to join their team. The ideal candidate will have a minimum of 5-7 years of experience working as a PLC Technician and have thorough understanding of PLC programming, implementation and troubleshooting. This is a fully onsite position, day shift with OT available. Please note in order to be considered for this role you must have: •Strong knowledge of PLCs (Allen Bradley)•Strong Knowledge of Robotics (ABB)•Strong knowledge of HMI programming (FTV, View, RSView32)•Strong knowledge of various networks (Ethernet/IP, DH+, RIO, DeviceNet, ControlNet, Modbus2, RS2332) •Able to interpret and design electrical schematicsAdvantages- Full time hours- Competitive compensation- Benefits- Vacation pay- Lots of room for growth - Overtime available Responsibilities•PLC, robot and HMI Programming, implementation, and troubleshooting•Preventative maintenance of production and support equipment•Repair of equipment – Design, verification, and maintenance of electrical schematics•Assist in setting up, maintaining programming electrical components and schematic standards•Assist in proper maintenance of all programming software, application files and programming hardware•Completion of all required work orders and associated paperwork•Responsible to improve equipment reliability and uptime related to automation and controls•Implementation of Continuous improvement ideas related to automation and robotics as assigned•Other duties as assignedQualifications•Graduate of Electrical or Mechanical Engineering Technology (Robot and Automation Program) and/or Provincial Electricians Ticket (442A or 309A) or applicable substitute•Excellent problem solving, judgement and decision-making skills•Proven ability to work in a team environment and lead problem-solving teams•Must have a strong awareness of safety and proven safety record.•Previous experience with automated equipment required•Previous experience with automated mould, production and process equipment preferred•Must have strong computer skills in MS Office (Word, Excel, PowerPoint, Access, Project)•Strong knowledge of PLCs (Allen Bradley)•Strong Knowledge of Robotics (ABB)•Strong knowledge of HMI programming (FTV, View, RSView32)•Strong knowledge of various networks (Ethernet/IP, DH+, RIO, DeviceNet, ControlNet, Modbus2, RS2332) •Able to interpret and design electrical schematicsSummaryIf this is something you are interested in please submit your resume or email it to Paulina Galinski at paulina.galinski@randstad.ca Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
    Our client is Hannon that manufactures water filtration systems is looking for a PLC Technician to join their team. The ideal candidate will have a minimum of 5-7 years of experience working as a PLC Technician and have thorough understanding of PLC programming, implementation and troubleshooting. This is a fully onsite position, day shift with OT available. Please note in order to be considered for this role you must have: •Strong knowledge of PLCs (Allen Bradley)•Strong Knowledge of Robotics (ABB)•Strong knowledge of HMI programming (FTV, View, RSView32)•Strong knowledge of various networks (Ethernet/IP, DH+, RIO, DeviceNet, ControlNet, Modbus2, RS2332) •Able to interpret and design electrical schematicsAdvantages- Full time hours- Competitive compensation- Benefits- Vacation pay- Lots of room for growth - Overtime available Responsibilities•PLC, robot and HMI Programming, implementation, and troubleshooting•Preventative maintenance of production and support equipment•Repair of equipment – Design, verification, and maintenance of electrical schematics•Assist in setting up, maintaining programming electrical components and schematic standards•Assist in proper maintenance of all programming software, application files and programming hardware•Completion of all required work orders and associated paperwork•Responsible to improve equipment reliability and uptime related to automation and controls•Implementation of Continuous improvement ideas related to automation and robotics as assigned•Other duties as assignedQualifications•Graduate of Electrical or Mechanical Engineering Technology (Robot and Automation Program) and/or Provincial Electricians Ticket (442A or 309A) or applicable substitute•Excellent problem solving, judgement and decision-making skills•Proven ability to work in a team environment and lead problem-solving teams•Must have a strong awareness of safety and proven safety record.•Previous experience with automated equipment required•Previous experience with automated mould, production and process equipment preferred•Must have strong computer skills in MS Office (Word, Excel, PowerPoint, Access, Project)•Strong knowledge of PLCs (Allen Bradley)•Strong Knowledge of Robotics (ABB)•Strong knowledge of HMI programming (FTV, View, RSView32)•Strong knowledge of various networks (Ethernet/IP, DH+, RIO, DeviceNet, ControlNet, Modbus2, RS2332) •Able to interpret and design electrical schematicsSummaryIf this is something you are interested in please submit your resume or email it to Paulina Galinski at paulina.galinski@randstad.ca Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
    • concord, ontario
    • permanent
    RESPONSIBILITIES: • Create detailed 2D or 3D shop drawings, shop tickets, connection details, and hardware BOM’s for fabrication in an efficient manner using various technical software.• Generate detailed bills of material as required for release of new projects to manufacturing..• Responsible for the quality checking and accuracy of all project deliverables prepared by themselves or those prepared by their peers.• Ability to read contract documents including architectural drawings, specifications, design details, shop drawings, structural drawings, etc.• Develop solutions and effectively communicate ideas through drawings, sketches, models, verbal and written means.• Preparation of precise 3D models of varying complexities.• Project coordination and consideration of integrated systems and details.QUALIFICATIONS: • Architectural and/or Technology related Degree/Diploma or equivalent and applicable experience.• Minimum 3 years of verifiable drafting experience, using AutoCAD, Revit and/or Inventor (BIM) for project delivery. Specific construction cladding industry and/or Architecture for Manufacturing experience is preferred.• Proficient with latest release of AutoCAD, Revit, Rhino, and/or Inventor is required, Catia an asset.• Understanding of engineering documents, drafting, and AutoCAD, with the skill level to utilize timesaving techniques and demonstrate advanced ability..• Fundamental knowledge of the engineering design principles, building construction and design processes are required.• Ability to visualize and communicate solutions to highly complex geometry problems or conditions related to construction with a keen ability to produce hand & digital sketches.• Ability to integrate project information, specifications, and requirements into drawings and BIM models seamlessly and efficiently.• Ability to identify problems in drawings, investigate and markup discrepancies.• Ability to check and revise drawings, prioritize tasks, manage time, and multi-task.• Strong organizational skills.• Strong attention to detail with a desire to provide excellent customer service and quality deliverables.• Excellent communication, interpersonal skills, and a team player.• Aptitude and motivated to grow skill level and knowledge beyond assigned tasks and role.• Ability to work in a dynamic, complex, and fast-paced environment• Solid skills in MS office products (Word, Excel, PowerPoint, Outlook, Teams)Please send your resume in confidence to paul.dusome@randstad.caAdvantages• Understanding of engineering documents, drafting, and AutoCAD, with the skill level to utilize timesaving techniques and demonstrate advanced ability..• Fundamental knowledge of the engineering design principles, building construction and design processes are required.• Ability to visualize and communicate solutions to highly complex geometry problems or conditions related to construction with a keen ability to produce hand & digital sketches.ResponsibilitiesRESPONSIBILITIES: • Create detailed 2D or 3D shop drawings, shop tickets, connection details, and hardware BOM’s for fabrication in an efficient manner using various technical software.• Generate detailed bills of material as required for release of new projects to manufacturing..• Responsible for the quality checking and accuracy of all project deliverables prepared by themselves or those prepared by their peers.• Ability to read contract documents including architectural drawings, specifications, design details, shop drawings, structural drawings, etc.• Develop solutions and effectively communicate ideas through drawings, sketches, models, verbal and written means.• Preparation of precise 3D models of varying complexities.• Project coordination and consideration of integrated systems and details.QUALIFICATIONS: • Architectural and/or Technology related Degree/Diploma or equivalent and applicable experience.• Minimum 3 years of verifiable drafting experience, using AutoCAD, Revit and/or Inventor (BIM) for project delivery. Specific construction cladding industry and/or Architecture for Manufacturing experience is preferred.• Proficient with latest release of AutoCAD, Revit, Rhino, and/or Inventor is required, Catia an asset.• Understanding of engineering documents, drafting, and AutoCAD, with the skill level to utilize timesaving techniques and demonstrate advanced ability..• Fundamental knowledge of the engineering design principles, building construction and design processes are required.• Ability to visualize and communicate solutions to highly complex geometry problems or conditions related to construction with a keen ability to produce hand & digital sketches.• Ability to integrate project information, specifications, and requirements into drawings and BIM models seamlessly and efficiently.• Ability to identify problems in drawings, investigate and markup discrepancies.• Ability to check and revise drawings, prioritize tasks, manage time, and multi-task.• Strong organizational skills.• Strong attention to detail with a desire to provide excellent customer service and quality deliverables.• Excellent communication, interpersonal skills, and a team player.• Aptitude and motivated to grow skill level and knowledge beyond assigned tasks and role.• Ability to work in a dynamic, complex, and fast-paced environment• Solid skills in MS office products (Word, Excel, PowerPoint, Outlook, Teams)Please send your resume in confidence to paul.dusome@randstad.caQualifications• Architectural and/or Technology related Degree/Diploma or equivalent and applicable experience.• Minimum 3 years of verifiable drafting experience, using AutoCAD, Revit and/or Inventor (BIM) for project delivery. Specific construction cladding industry and/or Architecture for Manufacturing experience is preferred.• Proficient with latest release of AutoCAD, Revit, Rhino, and/or Inventor is required, Catia an asset.• Understanding of engineering documents, drafting, and AutoCAD, with the skill level to utilize timesaving techniques and demonstrate advanced ability.SummaryRESPONSIBILITIES: • Create detailed 2D or 3D shop drawings, shop tickets, connection details, and hardware BOM’s for fabrication in an efficient manner using various technical software.• Generate detailed bills of material as required for release of new projects to manufacturing..• Responsible for the quality checking and accuracy of all project deliverables prepared by themselves or those prepared by their peers.• Ability to read contract documents including architectural drawings, specifications, design details, shop drawings, structural drawings, etc.• Develop solutions and effectively communicate ideas through drawings, sketches, models, verbal and written means.• Preparation of precise 3D models of varying complexities.• Project coordination and consideration of integrated systems and details.QUALIFICATIONS: • Architectural and/or Technology related Degree/Diploma or equivalent and applicable experience.• Minimum 3 years of verifiable drafting experience, using AutoCAD, Revit and/or Inventor (BIM) for project delivery. Specific construction cladding industry and/or Architecture for Manufacturing experience is preferred.• Proficient with latest release of AutoCAD, Revit, Rhino, and/or Inventor is required, Catia an asset.• Understanding of engineering documents, drafting, and AutoCAD, with the skill level to utilize timesaving techniques and demonstrate advanced ability..• Fundamental knowledge of the engineering design principles, building construction and design processes are required.• Ability to visualize and communicate solutions to highly complex geometry problems or conditions related to construction with a keen ability to produce hand & digital sketches.• Ability to integrate project information, specifications, and requirements into drawings and BIM models seamlessly and efficiently.• Ability to identify problems in drawings, investigate and markup discrepancies.• Ability to check and revise drawings, prioritize tasks, manage time, and multi-task.• Strong organizational skills.• Strong attention to detail with a desire to provide excellent customer service and quality deliverables.• Excellent communication, interpersonal skills, and a team player.• Aptitude and motivated to grow skill level and knowledge beyond assigned tasks and role.• Ability to work in a dynamic, complex, and fast-paced environment• Solid skills in MS office products (Word, Excel, PowerPoint, Outlook, Teams)Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
    RESPONSIBILITIES: • Create detailed 2D or 3D shop drawings, shop tickets, connection details, and hardware BOM’s for fabrication in an efficient manner using various technical software.• Generate detailed bills of material as required for release of new projects to manufacturing..• Responsible for the quality checking and accuracy of all project deliverables prepared by themselves or those prepared by their peers.• Ability to read contract documents including architectural drawings, specifications, design details, shop drawings, structural drawings, etc.• Develop solutions and effectively communicate ideas through drawings, sketches, models, verbal and written means.• Preparation of precise 3D models of varying complexities.• Project coordination and consideration of integrated systems and details.QUALIFICATIONS: • Architectural and/or Technology related Degree/Diploma or equivalent and applicable experience.• Minimum 3 years of verifiable drafting experience, using AutoCAD, Revit and/or Inventor (BIM) for project delivery. Specific construction cladding industry and/or Architecture for Manufacturing experience is preferred.• Proficient with latest release of AutoCAD, Revit, Rhino, and/or Inventor is required, Catia an asset.• Understanding of engineering documents, drafting, and AutoCAD, with the skill level to utilize timesaving techniques and demonstrate advanced ability..• Fundamental knowledge of the engineering design principles, building construction and design processes are required.• Ability to visualize and communicate solutions to highly complex geometry problems or conditions related to construction with a keen ability to produce hand & digital sketches.• Ability to integrate project information, specifications, and requirements into drawings and BIM models seamlessly and efficiently.• Ability to identify problems in drawings, investigate and markup discrepancies.• Ability to check and revise drawings, prioritize tasks, manage time, and multi-task.• Strong organizational skills.• Strong attention to detail with a desire to provide excellent customer service and quality deliverables.• Excellent communication, interpersonal skills, and a team player.• Aptitude and motivated to grow skill level and knowledge beyond assigned tasks and role.• Ability to work in a dynamic, complex, and fast-paced environment• Solid skills in MS office products (Word, Excel, PowerPoint, Outlook, Teams)Please send your resume in confidence to paul.dusome@randstad.caAdvantages• Understanding of engineering documents, drafting, and AutoCAD, with the skill level to utilize timesaving techniques and demonstrate advanced ability..• Fundamental knowledge of the engineering design principles, building construction and design processes are required.• Ability to visualize and communicate solutions to highly complex geometry problems or conditions related to construction with a keen ability to produce hand & digital sketches.ResponsibilitiesRESPONSIBILITIES: • Create detailed 2D or 3D shop drawings, shop tickets, connection details, and hardware BOM’s for fabrication in an efficient manner using various technical software.• Generate detailed bills of material as required for release of new projects to manufacturing..• Responsible for the quality checking and accuracy of all project deliverables prepared by themselves or those prepared by their peers.• Ability to read contract documents including architectural drawings, specifications, design details, shop drawings, structural drawings, etc.• Develop solutions and effectively communicate ideas through drawings, sketches, models, verbal and written means.• Preparation of precise 3D models of varying complexities.• Project coordination and consideration of integrated systems and details.QUALIFICATIONS: • Architectural and/or Technology related Degree/Diploma or equivalent and applicable experience.• Minimum 3 years of verifiable drafting experience, using AutoCAD, Revit and/or Inventor (BIM) for project delivery. Specific construction cladding industry and/or Architecture for Manufacturing experience is preferred.• Proficient with latest release of AutoCAD, Revit, Rhino, and/or Inventor is required, Catia an asset.• Understanding of engineering documents, drafting, and AutoCAD, with the skill level to utilize timesaving techniques and demonstrate advanced ability..• Fundamental knowledge of the engineering design principles, building construction and design processes are required.• Ability to visualize and communicate solutions to highly complex geometry problems or conditions related to construction with a keen ability to produce hand & digital sketches.• Ability to integrate project information, specifications, and requirements into drawings and BIM models seamlessly and efficiently.• Ability to identify problems in drawings, investigate and markup discrepancies.• Ability to check and revise drawings, prioritize tasks, manage time, and multi-task.• Strong organizational skills.• Strong attention to detail with a desire to provide excellent customer service and quality deliverables.• Excellent communication, interpersonal skills, and a team player.• Aptitude and motivated to grow skill level and knowledge beyond assigned tasks and role.• Ability to work in a dynamic, complex, and fast-paced environment• Solid skills in MS office products (Word, Excel, PowerPoint, Outlook, Teams)Please send your resume in confidence to paul.dusome@randstad.caQualifications• Architectural and/or Technology related Degree/Diploma or equivalent and applicable experience.• Minimum 3 years of verifiable drafting experience, using AutoCAD, Revit and/or Inventor (BIM) for project delivery. Specific construction cladding industry and/or Architecture for Manufacturing experience is preferred.• Proficient with latest release of AutoCAD, Revit, Rhino, and/or Inventor is required, Catia an asset.• Understanding of engineering documents, drafting, and AutoCAD, with the skill level to utilize timesaving techniques and demonstrate advanced ability.SummaryRESPONSIBILITIES: • Create detailed 2D or 3D shop drawings, shop tickets, connection details, and hardware BOM’s for fabrication in an efficient manner using various technical software.• Generate detailed bills of material as required for release of new projects to manufacturing..• Responsible for the quality checking and accuracy of all project deliverables prepared by themselves or those prepared by their peers.• Ability to read contract documents including architectural drawings, specifications, design details, shop drawings, structural drawings, etc.• Develop solutions and effectively communicate ideas through drawings, sketches, models, verbal and written means.• Preparation of precise 3D models of varying complexities.• Project coordination and consideration of integrated systems and details.QUALIFICATIONS: • Architectural and/or Technology related Degree/Diploma or equivalent and applicable experience.• Minimum 3 years of verifiable drafting experience, using AutoCAD, Revit and/or Inventor (BIM) for project delivery. Specific construction cladding industry and/or Architecture for Manufacturing experience is preferred.• Proficient with latest release of AutoCAD, Revit, Rhino, and/or Inventor is required, Catia an asset.• Understanding of engineering documents, drafting, and AutoCAD, with the skill level to utilize timesaving techniques and demonstrate advanced ability..• Fundamental knowledge of the engineering design principles, building construction and design processes are required.• Ability to visualize and communicate solutions to highly complex geometry problems or conditions related to construction with a keen ability to produce hand & digital sketches.• Ability to integrate project information, specifications, and requirements into drawings and BIM models seamlessly and efficiently.• Ability to identify problems in drawings, investigate and markup discrepancies.• Ability to check and revise drawings, prioritize tasks, manage time, and multi-task.• Strong organizational skills.• Strong attention to detail with a desire to provide excellent customer service and quality deliverables.• Excellent communication, interpersonal skills, and a team player.• Aptitude and motivated to grow skill level and knowledge beyond assigned tasks and role.• Ability to work in a dynamic, complex, and fast-paced environment• Solid skills in MS office products (Word, Excel, PowerPoint, Outlook, Teams)Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
    • ottawa, ontario
    • permanent
    We are seeking a Senior Electrical Engineer who will work with members of the engineering team in order to develop engineering design solutions appropriate to the context, budget, and aesthetic requirements of building projects. The individual will have the ability to analyze and understand design intent in order to produce efficient and effective technical design solutions. They will collaborate with other professional disciplines and coordinate the design through all phases of the project using their knowledge of building engineering systems, building materials, building codes, and construction technologies.Duties and Responsibilities:Evaluates project requirements and creates studies, drawings and specifications to support constructions projects.Designs components of the overall building including integrating architectural design and adhering to applicable codes and jurisdictional requirements.Assists the studio manager with the implementation of design standards and procedures to improve team efficiency.Performs engineering activities such as calculations, code research, equipment and building systems research, laying out components, and calculation of program and building areas.Evaluates site conditions, including zoning requirements and site constraints and performs site surveys and field reviews to accurately document existing and new construction conditions.Synthesizes, interprets and coordinates technical information to write engineering specifications for Project Manuals.Assigns tasks to and oversees the quality of work from less senior engineers and designers.Reviews project products, services and shop drawings to ensure adherence to project documents, relevant jurisdictional codes and corporate quality controls.Required Skills:Is proficient in Engineering software skills, including AutoCAD, Revit MEP, as well as electrical engineering systems design software.Ability to obtain federal government security clearance is mandatory ** extremely important**Ability to communicate in both English and French is an asset.Engineering knowledge related to building electrical systems and multiple building types.Familiarity with architectural design concepts and building codes is required.Have successfully completed related post-secondary educationRegistered with a relevant professional engineering association is an asset.Required Experience:10+ years of project work experienceExperience in the field of buildings systems electrical engineering.Please send your resume in confidence to paul.dusome@randstad.caAdvantages10+ years of project work experienceExperience in the field of buildings systems electrical engineering.Assists the studio manager with the implementation of design standards and procedures to improve team efficiency.Performs engineering activities such as calculations, code research, equipment and building systems research, laying out components, and calculation of program and building areas.ResponsibilitiesWe are seeking a Senior Electrical Engineer who will work with members of the engineering team in order to develop engineering design solutions appropriate to the context, budget, and aesthetic requirements of building projects. The individual will have the ability to analyze and understand design intent in order to produce efficient and effective technical design solutions. They will collaborate with other professional disciplines and coordinate the design through all phases of the project using their knowledge of building engineering systems, building materials, building codes, and construction technologies.Duties and Responsibilities:Evaluates project requirements and creates studies, drawings and specifications to support constructions projects.Designs components of the overall building including integrating architectural design and adhering to applicable codes and jurisdictional requirements.Assists the studio manager with the implementation of design standards and procedures to improve team efficiency.Performs engineering activities such as calculations, code research, equipment and building systems research, laying out components, and calculation of program and building areas.Evaluates site conditions, including zoning requirements and site constraints and performs site surveys and field reviews to accurately document existing and new construction conditions.Synthesizes, interprets and coordinates technical information to write engineering specifications for Project Manuals.Assigns tasks to and oversees the quality of work from less senior engineers and designers.Reviews project products, services and shop drawings to ensure adherence to project documents, relevant jurisdictional codes and corporate quality controls.Required Skills:Is proficient in Engineering software skills, including AutoCAD, Revit MEP, as well as electrical engineering systems design software.Ability to obtain federal government security clearance is mandatory ** extremely important**Ability to communicate in both English and French is an asset.Engineering knowledge related to building electrical systems and multiple building types.Familiarity with architectural design concepts and building codes is required.Have successfully completed related post-secondary educationRegistered with a relevant professional engineering association is an asset.Required Experience:10+ years of project work experienceExperience in the field of buildings systems electrical engineering.Please send your resume in confidence to paul.dusome@randstad.caQualificationsAn Electrical Engineering Degree 10+ years of project work experienceExperience in the field of buildings systems electrical engineering.Is proficient in Engineering software skills, including AutoCAD, Revit MEP, as well as electrical engineering systems design software.SummaryWe are seeking a Senior Electrical Engineer who will work with members of the engineering team in order to develop engineering design solutions appropriate to the context, budget, and aesthetic requirements of building projects. The individual will have the ability to analyze and understand design intent in order to produce efficient and effective technical design solutions. They will collaborate with other professional disciplines and coordinate the design through all phases of the project using their knowledge of building engineering systems, building materials, building codes, and construction technologies.Duties and Responsibilities:Evaluates project requirements and creates studies, drawings and specifications to support constructions projects.Designs components of the overall building including integrating architectural design and adhering to applicable codes and jurisdictional requirements.Assists the studio manager with the implementation of design standards and procedures to improve team efficiency.Performs engineering activities such as calculations, code research, equipment and building systems research, laying out components, and calculation of program and building areas.Evaluates site conditions, including zoning requirements and site constraints and performs site surveys and field reviews to accurately document existing and new construction conditions.Synthesizes, interprets and coordinates technical information to write engineering specifications for Project Manuals.Assigns tasks to and oversees the quality of work from less senior engineers and designers.Reviews project products, services and shop drawings to ensure adherence to project documents, relevant jurisdictional codes and corporate quality controls.Required Skills:Is proficient in Engineering software skills, including AutoCAD, Revit MEP, as well as electrical engineering systems design software.Ability to obtain federal government security clearance is mandatory ** extremely important**Ability to communicate in both English and French is an asset.Engineering knowledge related to building electrical systems and multiple building types.Familiarity with architectural design concepts and building codes is required.Have successfully completed related post-secondary educationRegistered with a relevant professional engineering association is an asset.Required Experience:10+ years of project work experienceExperience in the field of buildings systems electrical engineering.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
    We are seeking a Senior Electrical Engineer who will work with members of the engineering team in order to develop engineering design solutions appropriate to the context, budget, and aesthetic requirements of building projects. The individual will have the ability to analyze and understand design intent in order to produce efficient and effective technical design solutions. They will collaborate with other professional disciplines and coordinate the design through all phases of the project using their knowledge of building engineering systems, building materials, building codes, and construction technologies.Duties and Responsibilities:Evaluates project requirements and creates studies, drawings and specifications to support constructions projects.Designs components of the overall building including integrating architectural design and adhering to applicable codes and jurisdictional requirements.Assists the studio manager with the implementation of design standards and procedures to improve team efficiency.Performs engineering activities such as calculations, code research, equipment and building systems research, laying out components, and calculation of program and building areas.Evaluates site conditions, including zoning requirements and site constraints and performs site surveys and field reviews to accurately document existing and new construction conditions.Synthesizes, interprets and coordinates technical information to write engineering specifications for Project Manuals.Assigns tasks to and oversees the quality of work from less senior engineers and designers.Reviews project products, services and shop drawings to ensure adherence to project documents, relevant jurisdictional codes and corporate quality controls.Required Skills:Is proficient in Engineering software skills, including AutoCAD, Revit MEP, as well as electrical engineering systems design software.Ability to obtain federal government security clearance is mandatory ** extremely important**Ability to communicate in both English and French is an asset.Engineering knowledge related to building electrical systems and multiple building types.Familiarity with architectural design concepts and building codes is required.Have successfully completed related post-secondary educationRegistered with a relevant professional engineering association is an asset.Required Experience:10+ years of project work experienceExperience in the field of buildings systems electrical engineering.Please send your resume in confidence to paul.dusome@randstad.caAdvantages10+ years of project work experienceExperience in the field of buildings systems electrical engineering.Assists the studio manager with the implementation of design standards and procedures to improve team efficiency.Performs engineering activities such as calculations, code research, equipment and building systems research, laying out components, and calculation of program and building areas.ResponsibilitiesWe are seeking a Senior Electrical Engineer who will work with members of the engineering team in order to develop engineering design solutions appropriate to the context, budget, and aesthetic requirements of building projects. The individual will have the ability to analyze and understand design intent in order to produce efficient and effective technical design solutions. They will collaborate with other professional disciplines and coordinate the design through all phases of the project using their knowledge of building engineering systems, building materials, building codes, and construction technologies.Duties and Responsibilities:Evaluates project requirements and creates studies, drawings and specifications to support constructions projects.Designs components of the overall building including integrating architectural design and adhering to applicable codes and jurisdictional requirements.Assists the studio manager with the implementation of design standards and procedures to improve team efficiency.Performs engineering activities such as calculations, code research, equipment and building systems research, laying out components, and calculation of program and building areas.Evaluates site conditions, including zoning requirements and site constraints and performs site surveys and field reviews to accurately document existing and new construction conditions.Synthesizes, interprets and coordinates technical information to write engineering specifications for Project Manuals.Assigns tasks to and oversees the quality of work from less senior engineers and designers.Reviews project products, services and shop drawings to ensure adherence to project documents, relevant jurisdictional codes and corporate quality controls.Required Skills:Is proficient in Engineering software skills, including AutoCAD, Revit MEP, as well as electrical engineering systems design software.Ability to obtain federal government security clearance is mandatory ** extremely important**Ability to communicate in both English and French is an asset.Engineering knowledge related to building electrical systems and multiple building types.Familiarity with architectural design concepts and building codes is required.Have successfully completed related post-secondary educationRegistered with a relevant professional engineering association is an asset.Required Experience:10+ years of project work experienceExperience in the field of buildings systems electrical engineering.Please send your resume in confidence to paul.dusome@randstad.caQualificationsAn Electrical Engineering Degree 10+ years of project work experienceExperience in the field of buildings systems electrical engineering.Is proficient in Engineering software skills, including AutoCAD, Revit MEP, as well as electrical engineering systems design software.SummaryWe are seeking a Senior Electrical Engineer who will work with members of the engineering team in order to develop engineering design solutions appropriate to the context, budget, and aesthetic requirements of building projects. The individual will have the ability to analyze and understand design intent in order to produce efficient and effective technical design solutions. They will collaborate with other professional disciplines and coordinate the design through all phases of the project using their knowledge of building engineering systems, building materials, building codes, and construction technologies.Duties and Responsibilities:Evaluates project requirements and creates studies, drawings and specifications to support constructions projects.Designs components of the overall building including integrating architectural design and adhering to applicable codes and jurisdictional requirements.Assists the studio manager with the implementation of design standards and procedures to improve team efficiency.Performs engineering activities such as calculations, code research, equipment and building systems research, laying out components, and calculation of program and building areas.Evaluates site conditions, including zoning requirements and site constraints and performs site surveys and field reviews to accurately document existing and new construction conditions.Synthesizes, interprets and coordinates technical information to write engineering specifications for Project Manuals.Assigns tasks to and oversees the quality of work from less senior engineers and designers.Reviews project products, services and shop drawings to ensure adherence to project documents, relevant jurisdictional codes and corporate quality controls.Required Skills:Is proficient in Engineering software skills, including AutoCAD, Revit MEP, as well as electrical engineering systems design software.Ability to obtain federal government security clearance is mandatory ** extremely important**Ability to communicate in both English and French is an asset.Engineering knowledge related to building electrical systems and multiple building types.Familiarity with architectural design concepts and building codes is required.Have successfully completed related post-secondary educationRegistered with a relevant professional engineering association is an asset.Required Experience:10+ years of project work experienceExperience in the field of buildings systems electrical engineering.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.

It looks like you want to switch your language. This will reset your filters on your current job search.