Are you an experienced fitter looking for a new and exciting opportunity? Do you live within a commutable distance of Port Talbot? This is a great opportunity so don't miss out!The RoleThe job holder will be responsible for mechanical maintenance, refurbishment and repair of mechanical equipment within the Manufacturing Engineering function for support of process lines. Role responsibilities will include, but not be limited to the following:Health, Safety and Environmental performance adhering to the works IMS procedures and PPE instructions / procedures and facilitating the team safety meetings.Undertake safe operation of equipment and machines within the Manufacturing Engineering workshops.Repair mechanical items to a high standard from existing drawings to the expected delivery period.Assist with development of designs for manufacture of process line and safety improvements.Undertake repairs and refurbishments of existing equipment.Take an active role in CI, maintaining and improving safety and housekeeping standards within the Manufacturing Engineering Workshops.Undertake Zone Safety audits at a given frequency as per Safety Sub Plan.Undertake Risk assessments and LOLERs for activities to be undertaken.The candidate must be time served fitter.He/she must have good communications skills. The candidate must be able to work as part of a multi-disciplined team. He/she must possess good risk awareness when planning and undertaking tasks, and be able to challenge those who do not.If you would like to apply for this position you can either submit your CV to this advert or you can give me a call on my landline which is 01489 560132 (Ask for Connor) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Are you an experienced fitter looking for a new and exciting opportunity? Do you live within a commutable distance of Port Talbot? This is a great opportunity so don't miss out!The RoleThe job holder will be responsible for mechanical maintenance, refurbishment and repair of mechanical equipment within the Manufacturing Engineering function for support of process lines. Role responsibilities will include, but not be limited to the following:Health, Safety and Environmental performance adhering to the works IMS procedures and PPE instructions / procedures and facilitating the team safety meetings.Undertake safe operation of equipment and machines within the Manufacturing Engineering workshops.Repair mechanical items to a high standard from existing drawings to the expected delivery period.Assist with development of designs for manufacture of process line and safety improvements.Undertake repairs and refurbishments of existing equipment.Take an active role in CI, maintaining and improving safety and housekeeping standards within the Manufacturing Engineering Workshops.Undertake Zone Safety audits at a given frequency as per Safety Sub Plan.Undertake Risk assessments and LOLERs for activities to be undertaken.The candidate must be time served fitter.He/she must have good communications skills. The candidate must be able to work as part of a multi-disciplined team. He/she must possess good risk awareness when planning and undertaking tasks, and be able to challenge those who do not.If you would like to apply for this position you can either submit your CV to this advert or you can give me a call on my landline which is 01489 560132 (Ask for Connor) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Electrical Engineer Randstad are currently looking for an Electrical Enigneer to work for TATA Steel UK at their site in Port Talbot. This is a long term role, initially signed off for 12 months, but with projects scheduled for years to come.In this role you will be assisting the Project Manager / Engineer in the site coordination of activities associated with major capital schemes through the implementation stages (construction and commissioning) until handover. Responsibilities include ensuring that agreed, safety, technical, and time parameters are adhered to.The RoleTo form part of an engineering team able to deliver each project to a successful conclusion. The role will include responsibility for assisting with the coordinating and controlling all engineering activities on the project during the implementation and commissioning phases of projects in a specific discipline aligned to the project schedule and technical scope.Familiarise him/herself with, and to implement as it applies to his/her activities the companies Health and Safety policy and relevant statutory duties.Assist with the monitoring of Health & Safety performance during the implementation and handover phases of the Project including full compliance with respect to CDM Compliance and compliance with appropriate legislation.Act as a liaison between the Project Team and the Works Area production and maintenance personnel ensuring an effective cross flow of relevant data to ensure continuity with respect to project activities during the implementation and handover phase of the project.Implement, in conjunction with Project Engineer, the erection installation and commissioning of new plant co-ordinating the activities including the control of Contractors activities, monitoring and agreeing changes to plans ensuring that design modifications introduced during implementation and commissioning/running in are recorded for update following completion of the installation and commissioning.Assist the Project Engineer to liaise with the Plant area following handover to ensure outstanding snagging work is completed and the plant and equipment achieves a capable process.Education and ExperienceIdeally HND or degree (or equivalent experience) in an appropriate engineering disciplineHealth & Safety Qualification IOSH or equivalentExperience in heavy industries like steel making or petrochemical.Experience in Construction (installation and commissioning) of Plant for major capital schemes.Electrical Skills - ATEX Installations, Electrical Trace Heating Systems, PLC & Scada Systems (Rockwell Control Logix & iFix), Cable Installations and Testing. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Electrical Engineer Randstad are currently looking for an Electrical Enigneer to work for TATA Steel UK at their site in Port Talbot. This is a long term role, initially signed off for 12 months, but with projects scheduled for years to come.In this role you will be assisting the Project Manager / Engineer in the site coordination of activities associated with major capital schemes through the implementation stages (construction and commissioning) until handover. Responsibilities include ensuring that agreed, safety, technical, and time parameters are adhered to.The RoleTo form part of an engineering team able to deliver each project to a successful conclusion. The role will include responsibility for assisting with the coordinating and controlling all engineering activities on the project during the implementation and commissioning phases of projects in a specific discipline aligned to the project schedule and technical scope.Familiarise him/herself with, and to implement as it applies to his/her activities the companies Health and Safety policy and relevant statutory duties.Assist with the monitoring of Health & Safety performance during the implementation and handover phases of the Project including full compliance with respect to CDM Compliance and compliance with appropriate legislation.Act as a liaison between the Project Team and the Works Area production and maintenance personnel ensuring an effective cross flow of relevant data to ensure continuity with respect to project activities during the implementation and handover phase of the project.Implement, in conjunction with Project Engineer, the erection installation and commissioning of new plant co-ordinating the activities including the control of Contractors activities, monitoring and agreeing changes to plans ensuring that design modifications introduced during implementation and commissioning/running in are recorded for update following completion of the installation and commissioning.Assist the Project Engineer to liaise with the Plant area following handover to ensure outstanding snagging work is completed and the plant and equipment achieves a capable process.Education and ExperienceIdeally HND or degree (or equivalent experience) in an appropriate engineering disciplineHealth & Safety Qualification IOSH or equivalentExperience in heavy industries like steel making or petrochemical.Experience in Construction (installation and commissioning) of Plant for major capital schemes.Electrical Skills - ATEX Installations, Electrical Trace Heating Systems, PLC & Scada Systems (Rockwell Control Logix & iFix), Cable Installations and Testing. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Structural Inspector Randstad Engineering are currently recruiting for a Structural Inspector to come and work for TATA Steel in Port Talbot. The role is an initial 12 month contract paying £21 per hour, working Monday - Friday on a regular day shift. This role exists to lead, co-ordinate, control, manage and ensure a compliant statutory and non-statutory structuralInspection service to all works areas within the business at the Port Talbot plant. The role is dynamic since the plant inspectorsare tasked with assessing a number of multiple assets of a different nature. About the Candidate Candidates must be experienced plant inspectors competent in the integrity assessment of steel buildings, rail / crane gantries, blast furnace structures, conveyor systems, support structures, structures used to house and support heavy-lifting equipment and protective coating systems.To demonstrate full knowledge and understanding of the companies Health and Safety systems and relevant statutory duties and legislation.Coordinate daily activities/future activities (Structural Inspections) by maintaining close liaison with and advising Senior Managers, Production Managers, Departmental, Planning Engineers and Co-ordinators across plant and outside local authorities.The role will mean working directly alongside other Inspectors/Engineers such as Structural & Civil Engineering based backgrounds. There needs to be close liaison and strong team ethic at all times.The ability to accurately report the inspection findings regarding the condition of the plant is an important part of the job requirement in addition to being able to work closely with the relevant business unit managers to manage any underlying risk to ALARP.Provide technical expertise/guidance to all site areas for all StructuralInspection activities. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Structural Inspector Randstad Engineering are currently recruiting for a Structural Inspector to come and work for TATA Steel in Port Talbot. The role is an initial 12 month contract paying £21 per hour, working Monday - Friday on a regular day shift. This role exists to lead, co-ordinate, control, manage and ensure a compliant statutory and non-statutory structuralInspection service to all works areas within the business at the Port Talbot plant. The role is dynamic since the plant inspectorsare tasked with assessing a number of multiple assets of a different nature. About the Candidate Candidates must be experienced plant inspectors competent in the integrity assessment of steel buildings, rail / crane gantries, blast furnace structures, conveyor systems, support structures, structures used to house and support heavy-lifting equipment and protective coating systems.To demonstrate full knowledge and understanding of the companies Health and Safety systems and relevant statutory duties and legislation.Coordinate daily activities/future activities (Structural Inspections) by maintaining close liaison with and advising Senior Managers, Production Managers, Departmental, Planning Engineers and Co-ordinators across plant and outside local authorities.The role will mean working directly alongside other Inspectors/Engineers such as Structural & Civil Engineering based backgrounds. There needs to be close liaison and strong team ethic at all times.The ability to accurately report the inspection findings regarding the condition of the plant is an important part of the job requirement in addition to being able to work closely with the relevant business unit managers to manage any underlying risk to ALARP.Provide technical expertise/guidance to all site areas for all StructuralInspection activities. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Are you a welder/fabricator looking for your next big opportunity? Do you live within a commutable distance from Port Talbot? If so, this is a brilliant opportunity for you. The RoleThe Fabricator / Welder responsible for the manufacture and repair of equipment using a wide range of welding and fabrication techniques to support the Manufacturing Engineering function in maintaining process lines, cranes and safety systems across the site.In this capacity, you must ensure that all work is carried out in accordance with local and works SOP's in order to provide a safe working environment.Role responsibilities will include, but not be limited to the following:Health, Safety and Environmental performance adhering to the works IMS procedures and PPE instructions / procedures and facilitating the team safety meetings.Undertake safe operation of equipment within the Manufacturing Engineering workshops.Manufacture fabrications from existing drawings to the required standard in the expected delivery period.Assist with development of designs for manufacture of process line and safety improvements.Undertake repairs and refurbishments of existing equipment, e.g. Galvanising line pot gear.Take an active role in CI, maintaining and improving safety and housekeeping standards within the Manufacturing Engineering Workshops.Undertake work on process lines, auxiliary plant and cranes as required.Undertake Zone Safety audits at a given frequency as per Safety Sub Plan.Undertake Risk assessments and LOLERs for activities to be undertaken.Deputise for the Team Leader as and when required.Requirements / Personal SpecificationTo be successful in your application, you must be a time served welder / fabricator and have adequate relevant plant experience in a steel and construction related industry. You must have good communications skills and a full understanding of company procedures with regard to safety and environment for the given job level.You must also be able to work as part of a multi-disciplined team, possess good risk awareness when planning and undertaking tasks. If you would like to apply to this vacancy you can either submit your CV to this advert or you can give me a call on 01489 560132 (Ask for Connor) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Are you a welder/fabricator looking for your next big opportunity? Do you live within a commutable distance from Port Talbot? If so, this is a brilliant opportunity for you. The RoleThe Fabricator / Welder responsible for the manufacture and repair of equipment using a wide range of welding and fabrication techniques to support the Manufacturing Engineering function in maintaining process lines, cranes and safety systems across the site.In this capacity, you must ensure that all work is carried out in accordance with local and works SOP's in order to provide a safe working environment.Role responsibilities will include, but not be limited to the following:Health, Safety and Environmental performance adhering to the works IMS procedures and PPE instructions / procedures and facilitating the team safety meetings.Undertake safe operation of equipment within the Manufacturing Engineering workshops.Manufacture fabrications from existing drawings to the required standard in the expected delivery period.Assist with development of designs for manufacture of process line and safety improvements.Undertake repairs and refurbishments of existing equipment, e.g. Galvanising line pot gear.Take an active role in CI, maintaining and improving safety and housekeeping standards within the Manufacturing Engineering Workshops.Undertake work on process lines, auxiliary plant and cranes as required.Undertake Zone Safety audits at a given frequency as per Safety Sub Plan.Undertake Risk assessments and LOLERs for activities to be undertaken.Deputise for the Team Leader as and when required.Requirements / Personal SpecificationTo be successful in your application, you must be a time served welder / fabricator and have adequate relevant plant experience in a steel and construction related industry. You must have good communications skills and a full understanding of company procedures with regard to safety and environment for the given job level.You must also be able to work as part of a multi-disciplined team, possess good risk awareness when planning and undertaking tasks. If you would like to apply to this vacancy you can either submit your CV to this advert or you can give me a call on 01489 560132 (Ask for Connor) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Are you an experienced quality technician that has experience within goods in? Do you live within a commutable distance of Port Talbot? If so this is a great opportunity for you. Job ResponsibilitiesTo carry out goods inwards inspections aligned with the requirement of the business and in alignment with ISO 9001.To be accountable for the stores delivery and despatch areas. Controlling and auditing the inventory of stored components and assemblies.To identify issues with the current working process and recommend progressive change.Supply the bays with A consistent level of performance as required by the Service Engineers / Planning Engineers / Leading HandsTo cover for the Quality Assurance Technician during periods of both planned and un-planned absenceEnsure that all final inspection documents are correct prior being taken from the relevant bays.Control and improve the SAP and associated databases currently utilised within the department, for traceability / trending, to ensure compliance to departmental processes and proceduresIdentify opportunities to make financial savings within the process, through reduction in operating costs or improved reliability/efficiency Carries out all activities as detailed in the Safety Annual Plan. Adheres to all appropriate Health and Safety standards relevant to their job. Challenge & reports near misses, unsafe conditions and behaviours witnessed within the CES Workshop.Risks assess methods of working, potential impact of non-standard operations. ExperienceThe jobholder must have a strong management and analytical skills. They will have proven business acumen and have a successful track record in developing structured management processes and achieving challenging personal and department goals and objectives. Experience of managing within a stores/warehouse environment would be an advantage Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Are you an experienced quality technician that has experience within goods in? Do you live within a commutable distance of Port Talbot? If so this is a great opportunity for you. Job ResponsibilitiesTo carry out goods inwards inspections aligned with the requirement of the business and in alignment with ISO 9001.To be accountable for the stores delivery and despatch areas. Controlling and auditing the inventory of stored components and assemblies.To identify issues with the current working process and recommend progressive change.Supply the bays with A consistent level of performance as required by the Service Engineers / Planning Engineers / Leading HandsTo cover for the Quality Assurance Technician during periods of both planned and un-planned absenceEnsure that all final inspection documents are correct prior being taken from the relevant bays.Control and improve the SAP and associated databases currently utilised within the department, for traceability / trending, to ensure compliance to departmental processes and proceduresIdentify opportunities to make financial savings within the process, through reduction in operating costs or improved reliability/efficiency Carries out all activities as detailed in the Safety Annual Plan. Adheres to all appropriate Health and Safety standards relevant to their job. Challenge & reports near misses, unsafe conditions and behaviours witnessed within the CES Workshop.Risks assess methods of working, potential impact of non-standard operations. ExperienceThe jobholder must have a strong management and analytical skills. They will have proven business acumen and have a successful track record in developing structured management processes and achieving challenging personal and department goals and objectives. Experience of managing within a stores/warehouse environment would be an advantage Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Electrical CraftspersonRandstad Engineering are currently recruiting for an Electrical Craftsperson to join the Electrical team at TATA Steel in Port Talbot. Working on a 40 hour a week day shift, this role pays £13.83 per hour and is on a rolling 12 month contract. Purpose of Job The jobholder must ensure the efficient execution of installation and corrective/preventive maintenance whilst adhering to both local and works procedures. Working in Electrical Distribution, the jobholder will be involved in the provision of electrical services to a wide variety of areas: this includes High Voltage distribution at up to 33kV and all Low Voltage distribution and equipment outside of Manufacturing. Accountabilities Adhere to local and works procedures in relation to both Safety and Environment, undertake Risk Assessments and contribute to the delivery of the local Health & Safety Plan.Undertake projects and preventive/corrective maintenance on LV distribution systems.Facilitate with the development of Apprentices.Review maintenance procedures and amend /implement as necessary.Run and maintain standby generatorsTesting of the works earthing network.Knowledge and Experience The candidate will be a time served electrician in possession of formal qualifications (preferably HNC or equivalent)Relevant manufacturing environment experience. Good communications skills and an understanding of company procedures, good risk awareness when planning and undertaking tasks, and being able to challenge those who do not. Knowledge of HV equipment is preferred but not essential. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Electrical CraftspersonRandstad Engineering are currently recruiting for an Electrical Craftsperson to join the Electrical team at TATA Steel in Port Talbot. Working on a 40 hour a week day shift, this role pays £13.83 per hour and is on a rolling 12 month contract. Purpose of Job The jobholder must ensure the efficient execution of installation and corrective/preventive maintenance whilst adhering to both local and works procedures. Working in Electrical Distribution, the jobholder will be involved in the provision of electrical services to a wide variety of areas: this includes High Voltage distribution at up to 33kV and all Low Voltage distribution and equipment outside of Manufacturing. Accountabilities Adhere to local and works procedures in relation to both Safety and Environment, undertake Risk Assessments and contribute to the delivery of the local Health & Safety Plan.Undertake projects and preventive/corrective maintenance on LV distribution systems.Facilitate with the development of Apprentices.Review maintenance procedures and amend /implement as necessary.Run and maintain standby generatorsTesting of the works earthing network.Knowledge and Experience The candidate will be a time served electrician in possession of formal qualifications (preferably HNC or equivalent)Relevant manufacturing environment experience. Good communications skills and an understanding of company procedures, good risk awareness when planning and undertaking tasks, and being able to challenge those who do not. Knowledge of HV equipment is preferred but not essential. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Mechanical Craft We are looking for a Mechanical Maintenance Technician to work for our world wide raw material business in Port Talbot. The position exists to provide specialist mechanical engineering support as required. The pay for this position is £13.83 per hour on a 40 hour week, working a day shift.The successful candidate will be responsible for ensuring all activities are undertaken within Health, Safety and Environmental requirements and in compliance with company and legislative requirements. The jobholder will work as part of a team to ensure manufacturing performance on an ongoing basis and to support manufacturing development plans, identifying opportunities for improvement. The Responsibilities Role responsibilities will include, but not be limited to the following:Diagnosing and repairing equipment breakdowns. Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale.Carrying out maintenance routines on plant and equipment. Diagnosing and repairing equipment failures as required.Obtaining maintenance schedules from the maintenance management system (SAP) and feeding back work carried out. Work arising to be recorded using notifications.Locating spare parts using the maintenance management system. Collecting and returning spares to stores.To work under the permitry rules. Issuing certificates / permits as and when required.To assess all engineering plant changes using the Management of Change (MOC) system.Installation and testing of equipment. Requirements / Personal Specification The jobholder must have industrial Engineering experienceMust have experience of working within a safe system of workLevel 3 qualification in mechanical engineering Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Mechanical Craft We are looking for a Mechanical Maintenance Technician to work for our world wide raw material business in Port Talbot. The position exists to provide specialist mechanical engineering support as required. The pay for this position is £13.83 per hour on a 40 hour week, working a day shift.The successful candidate will be responsible for ensuring all activities are undertaken within Health, Safety and Environmental requirements and in compliance with company and legislative requirements. The jobholder will work as part of a team to ensure manufacturing performance on an ongoing basis and to support manufacturing development plans, identifying opportunities for improvement. The Responsibilities Role responsibilities will include, but not be limited to the following:Diagnosing and repairing equipment breakdowns. Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale.Carrying out maintenance routines on plant and equipment. Diagnosing and repairing equipment failures as required.Obtaining maintenance schedules from the maintenance management system (SAP) and feeding back work carried out. Work arising to be recorded using notifications.Locating spare parts using the maintenance management system. Collecting and returning spares to stores.To work under the permitry rules. Issuing certificates / permits as and when required.To assess all engineering plant changes using the Management of Change (MOC) system.Installation and testing of equipment. Requirements / Personal Specification The jobholder must have industrial Engineering experienceMust have experience of working within a safe system of workLevel 3 qualification in mechanical engineering Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
CDM Facilitator We are looking for a site co-coordinator/ CDM Facilitator to work for our world wide raw material business in Port Talbot. The position exists to provide specialist advise on health and safety issues during the design and planning phases of construction work and is someone who has and knowledge and experience of planning, management, construction, and communications.support as required. The pay for this position is £18.93 on a 36.5 to 40 hour week. The RoleAs a Service Department our customers are at the heart of everything we do. This role is key to ensuring that the service we provide is done so in a safe and professional way.Reporting to the Health & Safety Manager/independent Client representative of your assigned project, the purpose of the role is to advise on safe working practices and procedures via the principles of the Construction Design Management (CDM 2015) and Company Health & Safety Management Systems (CHSMS). To carry out this role successfully, you will be responsible for, but not limited to, the following duties:Support and advise the project teams/duty holders in the co-ordination, implementation and development of safety systems and procedures (plan, manage, monitor).To help ensure that adequate control measures are in place for the control of Contractors working for the Project & Design department and ensure compliance with appropriate CDM and H&S legislation is maintained.Identify improvements in health, safety and environmental standards in the assigned area/Project construction site.Track and drive safety compliance training within the local area, e.g. HAVS, Fire, Asbestos, Gas Awareness. Requirements / Personal SpecificationNEBOSH General Certificate or NEBOSH Construction Certificate.Construction Skills CITB 'Site Managers Safety Training Scheme' certificate or equivalent.Good knowledge of Construction techniques and processes.Experience in heavy industries such as steelmaking, major Civils or oil and gas. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
CDM Facilitator We are looking for a site co-coordinator/ CDM Facilitator to work for our world wide raw material business in Port Talbot. The position exists to provide specialist advise on health and safety issues during the design and planning phases of construction work and is someone who has and knowledge and experience of planning, management, construction, and communications.support as required. The pay for this position is £18.93 on a 36.5 to 40 hour week. The RoleAs a Service Department our customers are at the heart of everything we do. This role is key to ensuring that the service we provide is done so in a safe and professional way.Reporting to the Health & Safety Manager/independent Client representative of your assigned project, the purpose of the role is to advise on safe working practices and procedures via the principles of the Construction Design Management (CDM 2015) and Company Health & Safety Management Systems (CHSMS). To carry out this role successfully, you will be responsible for, but not limited to, the following duties:Support and advise the project teams/duty holders in the co-ordination, implementation and development of safety systems and procedures (plan, manage, monitor).To help ensure that adequate control measures are in place for the control of Contractors working for the Project & Design department and ensure compliance with appropriate CDM and H&S legislation is maintained.Identify improvements in health, safety and environmental standards in the assigned area/Project construction site.Track and drive safety compliance training within the local area, e.g. HAVS, Fire, Asbestos, Gas Awareness. Requirements / Personal SpecificationNEBOSH General Certificate or NEBOSH Construction Certificate.Construction Skills CITB 'Site Managers Safety Training Scheme' certificate or equivalent.Good knowledge of Construction techniques and processes.Experience in heavy industries such as steelmaking, major Civils or oil and gas. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Trainee Engineer Randstad are currently recruiting for a Trainee Engineer to join TATA steel in Port Talbot. The position is initially for a period of 12 months, with a likely extension for the right person. The hourly rate for this engineering position is £12.87 per hour, working a 36.5 hour week. No previous experience is required for this role, all training will be provided. Tata Steel is one of the world's top ten steel producers. The combined group has an aggregate crude steel capacity of more than 28 million tonnes and approximately 80,000 employees across four continents. Tata Steel is part of the Tata Group, one of the largest, most diverse conglomerates in the world with businesses in the UK including Tata Steel, Jaguar Land Rover and Tetley Tea. The RoleTata Steel Strip Products UK have recently invested in Faro 3D Scanning equipment to compliment their existing Design tools. The purpose of this job is to provide a complete on site 3D scanning service to TSSP UK sites at Port Talbot and Llanwern. This service will be supporting the development of Capital Projects and both Plant and Maintenance Improvements complying with relevant standards and regulations. Principal AccountabilitiesProvide an on site 3D Scanning service of Major Assets using the Faro Focus or Faro Freestyle Scanning equipment. This will support the "Design Out" maintenance failures / weaknesses to meet ongoing maintenance and plant improvements.To liaise with external technical organisations, manufacturers and other Tata departments and Divisions on 3D Scanning matters.To be the face to face contact and provide support knowledge to the Works area regarding work to be undertaken utilising the 3D Scanning equipment. Requirements / Personal SpecificationGood presentation and interpersonal skills are a must.Qualified to at least ONC Engineering Standard (or equivalent)Ability to handle and organise workforce, to write technical reports and communicate effectively with all levels of personnel with whom he/she has dealings.Excellent active listening skills.Ability to use 3D Cad Modelling software, preferably Solidworks.Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Trainee Engineer Randstad are currently recruiting for a Trainee Engineer to join TATA steel in Port Talbot. The position is initially for a period of 12 months, with a likely extension for the right person. The hourly rate for this engineering position is £12.87 per hour, working a 36.5 hour week. No previous experience is required for this role, all training will be provided. Tata Steel is one of the world's top ten steel producers. The combined group has an aggregate crude steel capacity of more than 28 million tonnes and approximately 80,000 employees across four continents. Tata Steel is part of the Tata Group, one of the largest, most diverse conglomerates in the world with businesses in the UK including Tata Steel, Jaguar Land Rover and Tetley Tea. The RoleTata Steel Strip Products UK have recently invested in Faro 3D Scanning equipment to compliment their existing Design tools. The purpose of this job is to provide a complete on site 3D scanning service to TSSP UK sites at Port Talbot and Llanwern. This service will be supporting the development of Capital Projects and both Plant and Maintenance Improvements complying with relevant standards and regulations. Principal AccountabilitiesProvide an on site 3D Scanning service of Major Assets using the Faro Focus or Faro Freestyle Scanning equipment. This will support the "Design Out" maintenance failures / weaknesses to meet ongoing maintenance and plant improvements.To liaise with external technical organisations, manufacturers and other Tata departments and Divisions on 3D Scanning matters.To be the face to face contact and provide support knowledge to the Works area regarding work to be undertaken utilising the 3D Scanning equipment. Requirements / Personal SpecificationGood presentation and interpersonal skills are a must.Qualified to at least ONC Engineering Standard (or equivalent)Ability to handle and organise workforce, to write technical reports and communicate effectively with all levels of personnel with whom he/she has dealings.Excellent active listening skills.Ability to use 3D Cad Modelling software, preferably Solidworks.Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Mechanical Craft We are looking for a Mechanical Maintenance Technician to work for our world wide raw material business in Port Talbot. The position exists to provide specialist mechanical engineering support as required. The pay for this position is £13.83 per hour on a 40 hour week, working a day shift.The successful candidate will be responsible for ensuring all activities are undertaken within Health, Safety and Environmental requirements and in compliance with company and legislative requirements. The jobholder will work as part of a team to ensure manufacturing performance on an ongoing basis and to support manufacturing development plans, identifying opportunities for improvement. The Responsibilities Role responsibilities will include, but not be limited to the following:Diagnosing and repairing equipment breakdowns. Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale.Carrying out maintenance routines on plant and equipment. Diagnosing and repairing equipment failures as required.Obtaining maintenance schedules from the maintenance management system (SAP) and feeding back work carried out. Work arising to be recorded using notifications.Locating spare parts using the maintenance management system. Collecting and returning spares to stores.To work under the permitry rules. Issuing certificates / permits as and when required.To assess all engineering plant changes using the Management of Change (MOC) system.Installation and testing of equipment. Requirements / Personal Specification The jobholder must have industrial Engineering experienceMust have experience of working within a safe system of workLevel 3 qualification in mechanical engineering Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Mechanical Craft We are looking for a Mechanical Maintenance Technician to work for our world wide raw material business in Port Talbot. The position exists to provide specialist mechanical engineering support as required. The pay for this position is £13.83 per hour on a 40 hour week, working a day shift.The successful candidate will be responsible for ensuring all activities are undertaken within Health, Safety and Environmental requirements and in compliance with company and legislative requirements. The jobholder will work as part of a team to ensure manufacturing performance on an ongoing basis and to support manufacturing development plans, identifying opportunities for improvement. The Responsibilities Role responsibilities will include, but not be limited to the following:Diagnosing and repairing equipment breakdowns. Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale.Carrying out maintenance routines on plant and equipment. Diagnosing and repairing equipment failures as required.Obtaining maintenance schedules from the maintenance management system (SAP) and feeding back work carried out. Work arising to be recorded using notifications.Locating spare parts using the maintenance management system. Collecting and returning spares to stores.To work under the permitry rules. Issuing certificates / permits as and when required.To assess all engineering plant changes using the Management of Change (MOC) system.Installation and testing of equipment. Requirements / Personal Specification The jobholder must have industrial Engineering experienceMust have experience of working within a safe system of workLevel 3 qualification in mechanical engineering Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Labourer Are you an experienced Labourer located in the Port Talbot area looking for your next job role? I'm looking for an experienced Labourer to work on a project in the Port Talbot area. Responsibilities Cleaning and clearing site Site setupMoving materialsAssisting with deliveries General labour and welfare duties Assisting trades on siteAny jobs as directed by site teamOpening and closing site Requirements CSCS cardOwm PPEThe ability to perform physical manual labourFull driving license (Desirable) Own vehicle (Desirable)If you are the right person for this job and want the opportunity to join the team please call Kristian on 07920206135 and email a copy of your CV to Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Labourer Are you an experienced Labourer located in the Port Talbot area looking for your next job role? I'm looking for an experienced Labourer to work on a project in the Port Talbot area. Responsibilities Cleaning and clearing site Site setupMoving materialsAssisting with deliveries General labour and welfare duties Assisting trades on siteAny jobs as directed by site teamOpening and closing site Requirements CSCS cardOwm PPEThe ability to perform physical manual labourFull driving license (Desirable) Own vehicle (Desirable)If you are the right person for this job and want the opportunity to join the team please call Kristian on 07920206135 and email a copy of your CV to Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Are you an experienced fitter looking for a new and exciting opportunity? Do you live within a commutable distance of Port Talbot? This is a great opportunity so don't miss out!The RoleThe job holder will be responsible for mechanical maintenance, refurbishment and repair of mechanical equipment within the Manufacturing Engineering function for support of process lines. Role responsibilities will include, but not be limited to the following:Health, Safety and Environmental performance adhering to the works IMS procedures and PPE instructions / procedures and facilitating the team safety meetings.Undertake safe operation of equipment and machines within the Manufacturing Engineering workshops.Repair mechanical items to a high standard from existing drawings to the expected delivery period.Assist with development of designs for manufacture of process line and safety improvements.Undertake repairs and refurbishments of existing equipment.Take an active role in CI, maintaining and improving safety and housekeeping standards within the Manufacturing Engineering Workshops.Undertake Zone Safety audits at a given frequency as per Safety Sub Plan.Undertake Risk assessments and LOLERs for activities to be undertaken.The candidate must be time served fitter.He/she must have good communications skills. The candidate must be able to work as part of a multi-disciplined team. He/she must possess good risk awareness when planning and undertaking tasks, and be able to challenge those who do not.If you would like to apply for this position you can either submit your CV to this advert or you can give me a call on my landline which is 01489 560132 (Ask for Connor) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Are you an experienced fitter looking for a new and exciting opportunity? Do you live within a commutable distance of Port Talbot? This is a great opportunity so don't miss out!The RoleThe job holder will be responsible for mechanical maintenance, refurbishment and repair of mechanical equipment within the Manufacturing Engineering function for support of process lines. Role responsibilities will include, but not be limited to the following:Health, Safety and Environmental performance adhering to the works IMS procedures and PPE instructions / procedures and facilitating the team safety meetings.Undertake safe operation of equipment and machines within the Manufacturing Engineering workshops.Repair mechanical items to a high standard from existing drawings to the expected delivery period.Assist with development of designs for manufacture of process line and safety improvements.Undertake repairs and refurbishments of existing equipment.Take an active role in CI, maintaining and improving safety and housekeeping standards within the Manufacturing Engineering Workshops.Undertake Zone Safety audits at a given frequency as per Safety Sub Plan.Undertake Risk assessments and LOLERs for activities to be undertaken.The candidate must be time served fitter.He/she must have good communications skills. The candidate must be able to work as part of a multi-disciplined team. He/she must possess good risk awareness when planning and undertaking tasks, and be able to challenge those who do not.If you would like to apply for this position you can either submit your CV to this advert or you can give me a call on my landline which is 01489 560132 (Ask for Connor) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.