Page 2 - 73 Permanent jobs found for you

Our client is looking for a youn L&D professional responsible for the Learning & Development and OD activities within the organisation for both corporate & operations team. The candidate is expected to have skilled competencies in L&D programs, identification of training requirements, suggest T&D programs and support to set a healthy OD culture.

Electrical technicians play a key role in the production, installation, maintenance, and repair of electrical equipment. They may work on communication, lighting, and control systems in factories, homes, buildings, and job sites. They often collaborate closely with electrical engineers and electricians.

Position : Senior Instrumentation and Control EngineerJob location : Abu DhabiSalary : 20 LPA  Experience : Experience in feasibility studies, conceptual design pre-FEED and FEED design in natural gas and/or crude oil processing plant as a lead engineer.Good experience of design of various Automation systems (PLC, DCS, ESD, IPS, FGS, FACP, HIPPS, LDS, RTU and SCADA), field instrumentation and prepare applicable project documentation.16~18 years of experien

Understanding the technical requirement of a project and preparing the project specification documents.Performing structural design and analysis calculations as per governing codes, standards & regulations, engineering formulas, best engineering practice and skill / experience. Use computer-assisted engineering and design software and equipment to prepare engineering design documents.Analyze and think innovatively to make the product technically advanced,

Job Description: -  Conducting Calibration testes on a wide range of measurement and testing equipment to ensure accuracy and reliability.Maintaining calibration records and documentation in compliance with NABL standards.Trouble Shooting & diagnostic equipment malfunctions during calibration process.Participating in internal audits and NABL accreditation assessments to ensure compliance with quality standards.Manage laboratory resources, including equipme

Key Responsibilities:  Electrical Designer with experience of 5-12 years in Physical Design in Offshore Oil & Gas sector.  Experienced in cable tray routing, underground cable routing, grounding & lightning protection, Lighting design etc. Knowledge of lighting calculation, tray / trench sizing calculation etc.  Experienced in 3D modelling of Cable Route/Lighting/Electrical equipment with PDMS / E3D/ SP3D (S3D)/ PDS, extraction of 2D layout from 3D mode

Possess a minimum of 7+ years of experience in Oil & Gas/Petrochemical Design Engineering.Demonstrated work experience in handling individual projects, particularly in Oil & Gas skid packages, with a focus on process-related tasks.Engage in basic and detailed Design Engineering activities for assigned projects in Petrochemical Plants, Oil & Gas Plants, Offshore Drilling Rigs, etc.Responsible for the preparation and review of PFDs, P&IDs, design calculation

Location- BangaloreRoleBuild, manage and provide  Project control support and expertise for the development of LPG Projects, establishing procedures and processes to mitigate schedule and budget risks and achieve the best return on investment in a cost -effective manner while keeping timely delivery of the Project. Education Bachelor’s degree in Engineering field (Preferably Graduate Chemical or Mechanical Engineering) with 15 years’ experience in Project

about the company My client is a specialised carbon / water treatment company. They are an MNC and has their footprints around the world. about the jobExpanding company customer base through direct efforts and established networksDrive business development strategies and explore new business opportunitiesCultivate and maintain strong relationships with existing clients,eIdentify potential clients, industries, and market segments for expansionDevelop new pr

about the companyYour future employer is an established MNC company within the O&G sector specializing in petrochemical, chemical, and broader industrial sectors in Malaysia. Due to their global presence, there will be opportunities to work on international projects. about the jobLead Assigned Engineer for proposals and job assignments, providing leadership in loss prevention processes and managing engineering resources efficiently.Advise and review techn

about the companyYour future employer is an established MNC company within the O&G sector specializing in petrochemical, chemical, and broader industrial sectors in Malaysia. Due to their global presence, there will be opportunities to work on international projects. about the jobContribute to bid preparation by participating in ITB studies and drafting bid specifications.Establish and adhere to standards and concepts aligning with project requirements.En

descriptif du posteRattaché(e) à la Responsable du service « Affaires », et au sein d'une équipe de 5 personnes, vous avez pour missions de coordonner les affaires à destination du secteur oil & gaz depuis la gestion/réponse aux appels d'offres jusqu'à la livraison des produits chez le client et ce en collaboration avec les différentes parties prenantes des projets en interne : Business Development Manager, AdV, BE, usines de production, basées en France e

Title   Job description for AGM/Sr. Manager - Operations – Completions & CementingDepartmentOperationsCore CompetenciesPersonal attributes:Driven by a values propositionSelf-learner and with a passion for improvementStrong desire to improve using Lean toolsServant leadership styleAn innovative thinkerResults driven with a collaborative approachDecisive and quick to arrive at a decisionExcellent communication skills, including highly proficient in both Hind

About the Role:We are seeking a highly skilled and experienced Senior Planner to join our team for a major £30 million energy carbon capture project. This landmark initiative, incorporating significant oil and gas elements, represents a pivotal step towards sustainable energy solutions. As a Senior Planner, you will play a crucial role in the successful delivery of this project, working with a leading Tier 1 contractor renowned for its excellence and innov

About the ProjectWe are at the forefront of the energy transition, embarking on a major £30 million energy carbon capture project with integral oil and gas elements. As a Tier 1 contractor, we are committed to delivering excellence and innovation in this critical sector.The RoleWe are seeking an experienced and highly skilled Senior Cost Engineer to join our dynamic team. In this pivotal role, you will play a key part in ensuring the financial success and

Location- Ahmedabad, GujaratROLE & RESPONSIBILITIES Develop and manage control budgets and site budgets.Supervise the creation of detailed work breakdown structures (WBSs) and work schedules/networks, aligning them with the overall project schedule.Monitor project progress closely and take corrective action as needed.Manage project scope, including identifying, evaluating, and responding to changes.Coordinate with the Civil In-Charge/ Construction Manager

Minimum Bachelor degree in Chemical Engineering / Instrumentation engineering preferred but other disciplines will be considered.Minimum 9+ years’ experience in engineering, Offshore operations, and/or maintenance with applied experience in Process Safety Management (PSM). Must be computer proficient.Capable of demonstrating knowledge of PHAST, QRA tools, LOPA tools, FLARESIM etc.Capable of demonstrating knowledge in International Standards such as IEC 615

Responsibilities:1. Set up and Collaborate with the sales team to understand customer requirements and suggest tailoredsolutions.2. Conduct technical presentations and demonstrations to showcase product features and benefits.3. Work closely with customers to gather technical specifications and provide pre-sales support.4. Create and deliver technical proposals, including product specifications, configurations, and pricing.5. Respond to technical inquiries

REQUIRED EXPERIENCE:-   B.E or B.Tech (Engineering Degree with respect to electrical engineering is MANDATORY.)  Diploma with respect to electrical engineering can be considered.  Experience of 10 – 15 years in case of B.E or B.tech degree.  Experience of 15 – 25 years in case of Diploma in electrical engineering  Excellent Communication skills required.  Proficiency in handling on - site projects and handling various assignments together.  Working

• Develop specifications, design basis, philosophies, designs related to piping engineering discipline for theapplication. Perform design to match specifications• Support for cost estimating. Provide necessary inputs for other disciplines to perform design engineeringand drafting.• Support for developing MDL for the product identified.• Review / comment on P&IDs and perform P&ID walk-downs on fabricated equipment. Perform modelreview (30%/60%/90%).• Perfor

Job Purpose -  The primary function of the position is to lead and manage the drilling and completion function for the assigned capital projects in offshore fields/ blocks providing leadership to D&C team to ensure all aspects are achieved. Key roles are to manage a multi-disciplinary team of D&C with the objective of - (i) Developing optimal project feasibility/ development plan for assigned asset to fulfil the organisational objective of monetizing disco

Position : Manager Engineering Mechanical (DCS)Job location : AhmedabadSalary : 18 LPA  Development and review of schematic, concept, and detailed design of Mechanical systems for the centralized chilled water plants• Preparation of Design basis repot (DBR), technical specifications and bill of materials (BOM)• Preparation of BOQ, cost estimates and develop cost benchmarking for the central chiller plants.• Liaising with OEMs and other technical groups to

Roles and Responsibilities: Maintain state-of-the-art knowledge in all pertinent aspects of the discipline includingdesign, analysis techniques, products, applicable codes, and construction practicesrelated to assigned projects. Create or check the “Design Basis” documents specific to the project. The documentis based on the applicable Codes, client specifications, Cameron scope of supply,and approved exception list. Perform or check Structural calculat

Perform and/or obtain and review the detailed design engineering necessary to execute assigned capital projects in an optimum manner reflecting the appropriate project drivers (time, capital cost, long term operating expense, operability, safety, etc). Preparation / review various engineering deliverables such as Process simulation, PFDs, P & IDs, project specific specifications, design calculation/ analysis, procurement specification, process optimisation

about the companyYour future employer is an established MNC company within the O&G sector specializing in petrochemical, chemical, and broader industrial sectors in Malaysia. Due to their global presence, there will be opportunities to work on international projects. about the jobContribute to bid preparation by participating in ITB studies and drafting bid specifications.Establish and adhere to standards and concepts aligning with project requirements.En

about the companyYour future employer is a MNC O&G company that specializes in providing a wide range of products and services to the refining, petrochemical, and natural gas industries. They are known for their expertise in catalysis and adsorption technologies and offer proprietary processes for licensing. about the jobManage and ensure the database requirements for the 3D model are up to date, involving coordination with various offices.Create a prelim

about the companyYour future employer is an MNC company and a main player in providing technical services for integrated oilfield engineering and providing comprehensive oilfield solutions. about the jobIdentify and pursue new business opportunities, partnerships, and projects in the oil and gas sectorDevelop and maintain a strong pipeline of potential clients and projectsCollaborate with the R&D and Sales teams to tailor product offerings to meet customer

We are looking for an "IT System Engineer" for our business partner in the oil and gas industry.Administer Exchange (O365 On-prem) server and mail connectors (including email gateways) and an international multi-site environment,Develop and maintain procedures and processes needed to administer an Active Directory / MS Exchange,Install new / rebuild existing servers and configure hardware, peripherals, services, settings, directories, storage, etc. in acc

We have a new requirement in Chennai for an engineering role- please find the JD below- Providing leadership, support, and coordinationTo ensure the efficient operation of engineering projects and initiatives.This position involves assisting the Head of Engineering in overseeing the daily activities, managing teams, and contributing to strategic decision-making within the department.On-time completion of engineering projectsReduction in COGS Adherence of d

Our client is a leading provider of engineering, construction and maintenance services within the transport, communications and technology, oil and gas, power generation, renewables and utilities sectors. Due to a large transport contract being awarded they are looking for multiple Electricians to support their team for ongoing work based in Newcastle.What’s involved?Installation of power and control circuitsInstallation of conduits, ducting, harnesses and