You are successfully logged out of your my randstad account

You have successfully deleted your account

7 jobs found in Alberta

filter3
clear all
    • edmonton, alberta
    • permanent
    Our client, a leader in reinforcing steel since 1970 is currently in need of a Rebar Detailer / Project coordinator for their Edmonton Location.In this role you will ensure preparation of accurate and concise placing drawings reflecting all pertinent building codes, detailed in accordance with RSIC standards and coordination of site steel requirements. AdvantagesOpportunities for growth and career development. Vacation, Benefits and RRSP contributions.ResponsibilitiesResponsibilities:- Organize, plan and inspect the assigned project drawings.- Communicate with General Contractors and Engineers to ensure that information is accurate.- Prepare accurate, concise shop drawings and bar lists by calculating the amounts of reinforcing steel needed by the engineer in determining the length, diameter and bend dimensions calculated for the steel to be manufactured. - identify needs, with the plant supervisor and/or customer in accordance with site requirements.- manage any changes to the initial plans as they may arise.- Prepare a detailed work schedule of projects and coordinate with other departments.- Verify that bar lists detailed by external firms are accurate, fabricated and delivered on time.QualificationsRequirements:- Minimum 5 years experience in Rebar Detailing.- Ownership of project mentality.- NAIT or technical school education.- Project management Experience seen as definite asset.- Knowledge of ASA Rebar, AutoCAD and Microstation software.SummaryFull time staff position in the greater Edmonton area. 5+ years Project Coordination experience preferred.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Our client, a leader in reinforcing steel since 1970 is currently in need of a Rebar Detailer / Project coordinator for their Edmonton Location.In this role you will ensure preparation of accurate and concise placing drawings reflecting all pertinent building codes, detailed in accordance with RSIC standards and coordination of site steel requirements. AdvantagesOpportunities for growth and career development. Vacation, Benefits and RRSP contributions.ResponsibilitiesResponsibilities:- Organize, plan and inspect the assigned project drawings.- Communicate with General Contractors and Engineers to ensure that information is accurate.- Prepare accurate, concise shop drawings and bar lists by calculating the amounts of reinforcing steel needed by the engineer in determining the length, diameter and bend dimensions calculated for the steel to be manufactured. - identify needs, with the plant supervisor and/or customer in accordance with site requirements.- manage any changes to the initial plans as they may arise.- Prepare a detailed work schedule of projects and coordinate with other departments.- Verify that bar lists detailed by external firms are accurate, fabricated and delivered on time.QualificationsRequirements:- Minimum 5 years experience in Rebar Detailing.- Ownership of project mentality.- NAIT or technical school education.- Project management Experience seen as definite asset.- Knowledge of ASA Rebar, AutoCAD and Microstation software.SummaryFull time staff position in the greater Edmonton area. 5+ years Project Coordination experience preferred.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • calgary, alberta
    • contract
    Execute technical, sales, and product management activities. The specialists are directed by the ETO Packaged Solution Champion and Engineering ManagerDesign, defines, and implements complex system requirements for customers and/or prepares studies and analyzes existing systems. Determines system specifications, input/output processes, and working parameters for hardware/software compatibility. Coordinates the design of subsystems and integration of the total system. Identifies, analyzes, and resolves program support deficiencies. Develops and recommends corrective actions.Activities include:Marketing activitiesSales support activitiesSales enablement activitiesProposal activitiesSolution development activitiesProject delivery activitiesAdvantagesWe are an Equal Opportunity Employer including disability and veteransOpportunity to turn into full time positionResponsibilitiesKey Competencies:General technical knowledge of midstream and/or upstream oil & gas operationsAbility to grasp technical detail, summarize clearly and present, demonstrate and respond accurately to questions from customersAbility to travelEasily understood, fluent, and professional spoken EnglishEasily understood, fluent, and professional written EnglishHighly organized and methodical work processDemonstrated ability to take responsibility for completion of tasksExperience in working in a continuous improvement environmentAbility to complete work, conforming to standard processes and proceduresLegal authorization to work in Canada is required. We will not sponsor individuals for employment visas, now or in the future, for this job openingQualificationsPreferred Qualifications:Bachelor's Degree in Engineering or related discipline. Bachelor's Degree in EngineeringMarketing or sales experienceProcess automation, measurement, or digital transformation experience in an oil and gas environmentExperience working with global teamsLicensed Professional Engineer or Engineer-in-TrainingFluent in a Second languageSummaryCoordinates the design of subsystems and integration of the total system. Identifies, analyzes, and resolves program support deficiencies. Develops and recommends corrective actions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Execute technical, sales, and product management activities. The specialists are directed by the ETO Packaged Solution Champion and Engineering ManagerDesign, defines, and implements complex system requirements for customers and/or prepares studies and analyzes existing systems. Determines system specifications, input/output processes, and working parameters for hardware/software compatibility. Coordinates the design of subsystems and integration of the total system. Identifies, analyzes, and resolves program support deficiencies. Develops and recommends corrective actions.Activities include:Marketing activitiesSales support activitiesSales enablement activitiesProposal activitiesSolution development activitiesProject delivery activitiesAdvantagesWe are an Equal Opportunity Employer including disability and veteransOpportunity to turn into full time positionResponsibilitiesKey Competencies:General technical knowledge of midstream and/or upstream oil & gas operationsAbility to grasp technical detail, summarize clearly and present, demonstrate and respond accurately to questions from customersAbility to travelEasily understood, fluent, and professional spoken EnglishEasily understood, fluent, and professional written EnglishHighly organized and methodical work processDemonstrated ability to take responsibility for completion of tasksExperience in working in a continuous improvement environmentAbility to complete work, conforming to standard processes and proceduresLegal authorization to work in Canada is required. We will not sponsor individuals for employment visas, now or in the future, for this job openingQualificationsPreferred Qualifications:Bachelor's Degree in Engineering or related discipline. Bachelor's Degree in EngineeringMarketing or sales experienceProcess automation, measurement, or digital transformation experience in an oil and gas environmentExperience working with global teamsLicensed Professional Engineer or Engineer-in-TrainingFluent in a Second languageSummaryCoordinates the design of subsystems and integration of the total system. Identifies, analyzes, and resolves program support deficiencies. Develops and recommends corrective actions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • calgary, alberta
    • permanent
    Our client is seeking an experienced Inspection Manager NDT for their CALGARY location to manage a team of Inspection professionals. With multiple locations across North America, they are one of the largest drilling service providers in the industry.The suitable candidate for this role will already have an established career path within Inspection Management with at least 3 years in a similar role. Your main focus will be the day to day management of an inspection team.Your responsibilities will include (not limited to) :•Day to Day management of the Inspection team•Ensure that all inspection documentation is accurate and up to date•Oversee the monitoring of tools and ensure they are inspected to adhere to company guidleines •Establish and maintain a consistent flow of the overall inspection process•Perform and maintain work quality audits on all Inspectors •Manage Inspection personnel including hiring, performance evaluations and disciplinary actions•Provide hands on training and implement training programs as required•Evaluate current and proposed systems and procedures and implement changes deemed necessary•Ensure all equipment meets Company, API and customer requirements for performance and calibration•Coordinate repairs and/or calibrations of various equipment•Ensure all inspections performed conform to proper specifications (API, DS-1 and Company SOP’s)•Create inspection documents or spreadsheets for reporting purposes•Work closely and communicate effectively with all internal departments•Perform duties according to the Company’s quality system procedures and work instructions•Schedule employees for regular, holiday and weekend shifts•Manage and respond to after hours, weekend, and holiday requests and inquiries•Ensure current API/DS-1 books and ASTM Standards are available to staff•Perform all duties so as to meet the responsibilities listed in the Employee and Corporate HSE Handbooks•Assist with inspection workload when required•Ensure employees have proper equipment and information to perform their tasks effectivelyRequired qualifications:•Current Level II NDT Certifications (MPI & LPI) or higher•Minimum 3 years management experience or management training•Minimum 3 years related field or facility experience•Experience in inspecting drill pipe, BHA and tubing•Solid communication skills, written and oral, excellent leadership and organizational skills•First Aid, Forklift and Overhead Crane certifications required•Valid class 5 Driver’s License•Valid annual eye examOnly applicants who meet or exceed the above requirements will be considered.You must also have the legal right to live and work in Canada Randstad values diversity and we do not discriminate on the grounds of age, skin color, disability, gender, marital status, nationality, race, religion, or sexual orientation, and we have a non-discrimination policy to underline this.Please apply via email including your resume directly to simon.evans@randstad.ca or respond to this posting Advantages...........................................................................Responsibilities...........................................................................Qualifications............................................................................Summary...........................................................................Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Our client is seeking an experienced Inspection Manager NDT for their CALGARY location to manage a team of Inspection professionals. With multiple locations across North America, they are one of the largest drilling service providers in the industry.The suitable candidate for this role will already have an established career path within Inspection Management with at least 3 years in a similar role. Your main focus will be the day to day management of an inspection team.Your responsibilities will include (not limited to) :•Day to Day management of the Inspection team•Ensure that all inspection documentation is accurate and up to date•Oversee the monitoring of tools and ensure they are inspected to adhere to company guidleines •Establish and maintain a consistent flow of the overall inspection process•Perform and maintain work quality audits on all Inspectors •Manage Inspection personnel including hiring, performance evaluations and disciplinary actions•Provide hands on training and implement training programs as required•Evaluate current and proposed systems and procedures and implement changes deemed necessary•Ensure all equipment meets Company, API and customer requirements for performance and calibration•Coordinate repairs and/or calibrations of various equipment•Ensure all inspections performed conform to proper specifications (API, DS-1 and Company SOP’s)•Create inspection documents or spreadsheets for reporting purposes•Work closely and communicate effectively with all internal departments•Perform duties according to the Company’s quality system procedures and work instructions•Schedule employees for regular, holiday and weekend shifts•Manage and respond to after hours, weekend, and holiday requests and inquiries•Ensure current API/DS-1 books and ASTM Standards are available to staff•Perform all duties so as to meet the responsibilities listed in the Employee and Corporate HSE Handbooks•Assist with inspection workload when required•Ensure employees have proper equipment and information to perform their tasks effectivelyRequired qualifications:•Current Level II NDT Certifications (MPI & LPI) or higher•Minimum 3 years management experience or management training•Minimum 3 years related field or facility experience•Experience in inspecting drill pipe, BHA and tubing•Solid communication skills, written and oral, excellent leadership and organizational skills•First Aid, Forklift and Overhead Crane certifications required•Valid class 5 Driver’s License•Valid annual eye examOnly applicants who meet or exceed the above requirements will be considered.You must also have the legal right to live and work in Canada Randstad values diversity and we do not discriminate on the grounds of age, skin color, disability, gender, marital status, nationality, race, religion, or sexual orientation, and we have a non-discrimination policy to underline this.Please apply via email including your resume directly to simon.evans@randstad.ca or respond to this posting Advantages...........................................................................Responsibilities...........................................................................Qualifications............................................................................Summary...........................................................................Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • calgary, alberta
    • permanent
    The Project Manager - Construction is responsible for all aspects of project management, including, but not limited to, procurement, scope, schedule, cost, quality, human resources, communications, risk, and stakeholders. The Project Manager works closely with the project team and stakeholders and maintains an excellent relationship with subcontractors and clients. AdvantagesStable company that is going through significant growthGreat organization that promotes organic growthExciting portfolio of projects ResponsibilitiesThe Tasks:•Manage project activities throughout the life cycle of the project, including the allocation of adequate resources, scheduling, documentation, and budgets;•Achieve the project budget and complete accurate monthly forecasts;•Act as primary liaison with clients, designers, site superintendents, subtrades and other project stakeholders•Organize project teams into suitable workgroups and guide the teams through their efforts to produce deliverables according to specification•Manage internal and/or external contractors or trades•Manage trade contractor site meetings, RFIs, invoices and control document process•Plan all project timelines, milestones, deliverables and micro-deliverables using the appropriate software tools and/or project-management methods•Complete accurate monthly forecasts for all assigned projects•Conduct stakeholder meetings and forums in order to solicit feedback, input and expectationsQualificationsThe Requirements (Minimum Qualifications):•Technical diploma in an appropriate construction-related field (CET), or equivalent construction experience•Five or more years of experience in commercial construction•Three or more years of direct work experience in construction project management•Solid understanding of all construction trades, safety and construction techniques•Able to interpret and effectively manage multiple and competing priorities and timelines•Frequent travel to local site and off-site locations as requiredThe Preferred Qualifications:•Gold Seal Certification (GSC) or Gold Seal Intern (GSI) is considered an asset•Construction / Engineering degree is preferred•First aid skills and/or certificates are considered assets•Superior leadership qualities with a demonstrated track record of dealing successfully with internal and external clientsSummaryThis role will be based in Calgary. Only local candidates will be considered. If you work in commercial construction and would like to learn more about this opportunity, please send your resume to brad.wyma@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    The Project Manager - Construction is responsible for all aspects of project management, including, but not limited to, procurement, scope, schedule, cost, quality, human resources, communications, risk, and stakeholders. The Project Manager works closely with the project team and stakeholders and maintains an excellent relationship with subcontractors and clients. AdvantagesStable company that is going through significant growthGreat organization that promotes organic growthExciting portfolio of projects ResponsibilitiesThe Tasks:•Manage project activities throughout the life cycle of the project, including the allocation of adequate resources, scheduling, documentation, and budgets;•Achieve the project budget and complete accurate monthly forecasts;•Act as primary liaison with clients, designers, site superintendents, subtrades and other project stakeholders•Organize project teams into suitable workgroups and guide the teams through their efforts to produce deliverables according to specification•Manage internal and/or external contractors or trades•Manage trade contractor site meetings, RFIs, invoices and control document process•Plan all project timelines, milestones, deliverables and micro-deliverables using the appropriate software tools and/or project-management methods•Complete accurate monthly forecasts for all assigned projects•Conduct stakeholder meetings and forums in order to solicit feedback, input and expectationsQualificationsThe Requirements (Minimum Qualifications):•Technical diploma in an appropriate construction-related field (CET), or equivalent construction experience•Five or more years of experience in commercial construction•Three or more years of direct work experience in construction project management•Solid understanding of all construction trades, safety and construction techniques•Able to interpret and effectively manage multiple and competing priorities and timelines•Frequent travel to local site and off-site locations as requiredThe Preferred Qualifications:•Gold Seal Certification (GSC) or Gold Seal Intern (GSI) is considered an asset•Construction / Engineering degree is preferred•First aid skills and/or certificates are considered assets•Superior leadership qualities with a demonstrated track record of dealing successfully with internal and external clientsSummaryThis role will be based in Calgary. Only local candidates will be considered. If you work in commercial construction and would like to learn more about this opportunity, please send your resume to brad.wyma@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • fort saskatchewan, alberta
    • contract
    Senior Scheduler required for Immediate start ( November 1 2021 )We are seeking a Senior Scheduler with C&SU experience for our client in Fort Saskatchewan, ABMust have very strong P6 skills including ideally some leadership experienceYou will be working on process scheduling on a large field siteShifts are 11/3 for 10 hour days for up to 9 monthsApplicants must be from the local Edmonton area and have strong field experiencePlease note, all application need to be received by EOD Thursday Oct 21 Respond direct to this posting including an MS Word copy of your resume or call 403 390 9518 to speak to the recruitment team.AdvantagesPrevious C&SU exposure_______________________________Leadership experienceResponsibilities...........................................................................QualificationsPrimavera P6_______________________________________________________________________SummarySenior Scheduler required for Immediate start ( November 1 2021 )We are seeking a Senior Scheduler with C&SU experience for our client in Fort Saskatchewan, ABMust have very strong P6 skills including ideally some leadership experienceYou will be working on process scheduling on a large field siteShifts are 11/3 for 10 hour days for up to 9 monthsApplicants must be from the local Edmonton area and have strong field experiencePlease note, all application need to be received by EOD Thursday Oct 21 Respond direct to this posting including an MS Word copy of your resume or call 403 390 9518 to speak to the recruitment team.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Senior Scheduler required for Immediate start ( November 1 2021 )We are seeking a Senior Scheduler with C&SU experience for our client in Fort Saskatchewan, ABMust have very strong P6 skills including ideally some leadership experienceYou will be working on process scheduling on a large field siteShifts are 11/3 for 10 hour days for up to 9 monthsApplicants must be from the local Edmonton area and have strong field experiencePlease note, all application need to be received by EOD Thursday Oct 21 Respond direct to this posting including an MS Word copy of your resume or call 403 390 9518 to speak to the recruitment team.AdvantagesPrevious C&SU exposure_______________________________Leadership experienceResponsibilities...........................................................................QualificationsPrimavera P6_______________________________________________________________________SummarySenior Scheduler required for Immediate start ( November 1 2021 )We are seeking a Senior Scheduler with C&SU experience for our client in Fort Saskatchewan, ABMust have very strong P6 skills including ideally some leadership experienceYou will be working on process scheduling on a large field siteShifts are 11/3 for 10 hour days for up to 9 monthsApplicants must be from the local Edmonton area and have strong field experiencePlease note, all application need to be received by EOD Thursday Oct 21 Respond direct to this posting including an MS Word copy of your resume or call 403 390 9518 to speak to the recruitment team.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • calgary, alberta
    • contract
    Contracts Analyst will primarily be responsible for overall management of professional contracts and tenders that the SCM team is handling. This will include the pre-qualification of 3rd party contractors and suppliers, being the point of contact for any contractual communications pertaining the the contract agreement, and participating in the negotiation, tendering, and full qualifications process for pre & post awarded contracts. AdvantagesThis is an excellent opportunity for someone that is passionate about SCM - Contracts and enjoys working within a team that strives for excellence every dayResponsibilitiesWorking closely within the Supply Chain team throughout the RFI process to manage all professional contracts and tendersQualificationsSupply Chain background specific to Contracts Management including RFI's, quotes, and proposalsA Supply Chain Management Professional (SCMP) designation is considered an asset.A certificate or diploma in supply chain management (SCM) is considered an asset.SummaryIf this is something you are qualified to do and are happy to take on some potentially long term contract work, please email your resume to brad.wyma@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Contracts Analyst will primarily be responsible for overall management of professional contracts and tenders that the SCM team is handling. This will include the pre-qualification of 3rd party contractors and suppliers, being the point of contact for any contractual communications pertaining the the contract agreement, and participating in the negotiation, tendering, and full qualifications process for pre & post awarded contracts. AdvantagesThis is an excellent opportunity for someone that is passionate about SCM - Contracts and enjoys working within a team that strives for excellence every dayResponsibilitiesWorking closely within the Supply Chain team throughout the RFI process to manage all professional contracts and tendersQualificationsSupply Chain background specific to Contracts Management including RFI's, quotes, and proposalsA Supply Chain Management Professional (SCMP) designation is considered an asset.A certificate or diploma in supply chain management (SCM) is considered an asset.SummaryIf this is something you are qualified to do and are happy to take on some potentially long term contract work, please email your resume to brad.wyma@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • edmonton, alberta
    • contract
    • $40.21 - $43.56 per hour
    Bachelor's degree (Business or Engineering)5 -8 years’ experience with rotating and/or reciprocating equipment repairs ( steam turbines, centrifugal compressors, gas turbines, reciprocating compressors, turbochargers, valves, dry gas seals), manufacturing environment or quoting hrs. and resources for repair scopesExperience with managing project life cycle and cost Must adapt to fast pace environmentExperience with MS Word, Excel, Power Point, Project and Outlook.Experience working in an organization with a strong commitment to Health, Safety and Environment.Flexible to work extended hours during shutdown time frames which can include evenings, weekends and holidays.Strong capability in project management.Familiarity and experience with rotating equipment (steam turbine, gas turbine, turbochargers, reciprocating compressors, valves and dry gas seals) repairs.Interpret customer maintenance and/or repair specifications to technical personnel for repair and maintenance of equipment.Review contractual terms and conditions for service specifications.Support shop personnel in execution of activity described in recommendations.Liaison between client and shop regarding status, scope change, hold points, etc.Develop specific quotations for repair work scopes with associated detailed costs.Provide concise and descriptive work instructions to the shop floor.Prepare and deliver project documentation and progress reports for internal and external customers.Support and maintain Lean implementation projects.Assist with and support the various safety projects and initiatives within the Service Center.Closely monitor ongoing job-costs, with focus on cost actual versus quote/estimate.Perform contract review including Terms & Conditions per policy.Prepare and issue shop instructions for inspection and repair scopes referencing all appropriate repair and factory technical specifications.Collaborate with technical specialists and QA manager to ensure that all jobs are completed within job specific or general quality guidelines and assurancesAdvantagesFull Time Staff with in 3 monthsRRSP Contributions OT AvailableVacationFull BenefitsResponsibilitiesOur client is looking for a replacement project manager due to internal promotions.Candidates with an oil/gas engineering backgroundLooking for experience with oil and gas rotating equipment, preferred engineering degree and or college degreeResponsible for scope schedule and budget for repair projects. Needs to be well organized, computer literate, and able to deal with customers and internal stake holders directlyQualificationsBachelor's degree (Business or Engineering) PREFERRED NOT MANDITORY5-10 Years experience servicing rotating and reciprocating equipmentSummaryThis position will be a full time opportunity, no travel required for this position, work is all performed in Edmonton on a Mon - Fri Basis.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Bachelor's degree (Business or Engineering)5 -8 years’ experience with rotating and/or reciprocating equipment repairs ( steam turbines, centrifugal compressors, gas turbines, reciprocating compressors, turbochargers, valves, dry gas seals), manufacturing environment or quoting hrs. and resources for repair scopesExperience with managing project life cycle and cost Must adapt to fast pace environmentExperience with MS Word, Excel, Power Point, Project and Outlook.Experience working in an organization with a strong commitment to Health, Safety and Environment.Flexible to work extended hours during shutdown time frames which can include evenings, weekends and holidays.Strong capability in project management.Familiarity and experience with rotating equipment (steam turbine, gas turbine, turbochargers, reciprocating compressors, valves and dry gas seals) repairs.Interpret customer maintenance and/or repair specifications to technical personnel for repair and maintenance of equipment.Review contractual terms and conditions for service specifications.Support shop personnel in execution of activity described in recommendations.Liaison between client and shop regarding status, scope change, hold points, etc.Develop specific quotations for repair work scopes with associated detailed costs.Provide concise and descriptive work instructions to the shop floor.Prepare and deliver project documentation and progress reports for internal and external customers.Support and maintain Lean implementation projects.Assist with and support the various safety projects and initiatives within the Service Center.Closely monitor ongoing job-costs, with focus on cost actual versus quote/estimate.Perform contract review including Terms & Conditions per policy.Prepare and issue shop instructions for inspection and repair scopes referencing all appropriate repair and factory technical specifications.Collaborate with technical specialists and QA manager to ensure that all jobs are completed within job specific or general quality guidelines and assurancesAdvantagesFull Time Staff with in 3 monthsRRSP Contributions OT AvailableVacationFull BenefitsResponsibilitiesOur client is looking for a replacement project manager due to internal promotions.Candidates with an oil/gas engineering backgroundLooking for experience with oil and gas rotating equipment, preferred engineering degree and or college degreeResponsible for scope schedule and budget for repair projects. Needs to be well organized, computer literate, and able to deal with customers and internal stake holders directlyQualificationsBachelor's degree (Business or Engineering) PREFERRED NOT MANDITORY5-10 Years experience servicing rotating and reciprocating equipmentSummaryThis position will be a full time opportunity, no travel required for this position, work is all performed in Edmonton on a Mon - Fri Basis.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Explore over 7 jobs in Alberta

It looks like you want to switch your language. This will reset your filters on your current job search.