Job opening - Manufacturing Engineer in Eindhoven

summary

eindhoven, noord-brabant
permanent

job category
engineering

job details

Een innovatief design van R&D is pas een succes als het ook echt de fabriek uitrolt. Krijg jij het gebouwd? In de Brainport regio is Yacht de strategische partner voor de wereldtop in de semicon en machinebouw. Wij openen de deuren bij koplopers als ASML, Philips, Thermo Fisher en TNO. Jij bent de Manufacturing Engineer die zorgt dat high-tech innovatie tastbare werkelijkheid wordt.

Als Manufacturing Engineer bij Yacht ben je de onmisbare tolk tussen de tekentafel en de werkvloer. Je komt binnen bij bedrijven waar toleranties microscopisch zijn en de belangen gigantisch. Jij ziet waar een proces vastloopt nog voordat de eerste schroef is aangedraaid. Of het nu gaat om een New Product Introduction (NPI) traject bij een grote OEM of het opschalen van een productielijn bij een specialistische toeleverancier: jij hebt de regie over de maakbaarheid.

Daarnaast houd je je ook met het volgende bezig:

...

Je vertaalt complexe designs naar een schaalbaar en vlekkeloos productieproces op de vloer.
Je adviseert R&D over Design for Manufacturing (DfM) om productiekosten en doorlooptijden te verlagen.
Je elimineert bottlenecks in high-mix, low-volume omgevingen met methodieken als Lean of Six Sigma.
Je bent het aanspreekpunt voor operators en vertaalt high-tech specificaties naar werkbare instructies.
Je pakt de lead in verbetertrajecten gericht op kwaliteit, efficiency en operational excellence.

Daarnaast houd je je ook met het volgende bezig:

...

Je vertaalt complexe designs naar een schaalbaar en vlekkeloos productieproces op de vloer.
Je adviseert R&D over Design for Manufacturing (DfM) om productiekosten en doorlooptijden te verlagen.
Je elimineert bottlenecks in high-mix, low-volume omgevingen met methodieken als Lean of Six Sigma.
Je bent het aanspreekpunt voor operators en vertaalt high-tech specificaties naar werkbare instructies.
Je pakt de lead in verbetertrajecten gericht op kwaliteit, efficiency en operational excellence.

experience
2
skills
- Je woont momenteel in Nederland en hebt relevante werkervaring opgedaan binnen de Nederlandse High Tech of Semicon sector.
- Een afgeronde technische HBO- of WO-opleiding (bijv. WTB, Mechatronica of Technische Bedrijfskunde).
- Minimaal 2 jaar ervaring als Manufacturing of Process Engineer.
- Je spreekt en schrijft uitstekend Nederlands; dit is cruciaal voor de communicatie op de Brabantse werkvloer en met lokale leveranciers.
- Een pragmatische instelling: je begrijpt de complexe theorie, maar staat net zo lief met je voeten in het vet.
qualifications
WO,HBO

share this job.

apply with randstad.
Applying with us is easy. We will review your application and see if you are a good fit for the job and the company.
we'll give you a call.
Our consultant will call you at a suitable time to discuss your application and further career aspirations.
getting you registered.
If you’ve never worked with us before, we’ll need some basic additional pieces of information to confirm your eligibility for work.
compliance check.
Next, we just need to verify a few things - we’ll make the relevant compliance checks and keep you posted.
reference and background check.
As part of the process in ensuring you’re perfect for the role, we’ll make contact with any relevant references you’ve provided.
the perfect job for you.
Our expert team will either arrange an interview for the role you’ve applied for, or if they believe there’s a better opportunity, they’ll suggest alternative options too.
the interview.
We’ll ensure that you’re fully prepared ahead of your interview and know exactly what to expect - good luck!
start your new job.
Congratulations, you’re ready to begin your new job. The team will ensure that you’re fully prepared for your first day.

hydrogen combustion engine calibration engineer
- eindhoven, noord-brabant
- permanent
- €5,000 per month
The Functional Calibration Team determines whether an engine and its subsystems are functioning according to established standards while the engine operates in its intended environment.ResponsibilitiesPrepare test plans, execute development tests and perform complex analysis of Engine and Aftertreatment systems and their controls.Focus on Engine and Aftertreatment calibration activities to meet functional and performance related requirements.Document and e
posted 17 february 2026
The Functional Calibration Team determines whether an engine and its subsystems are functioning according to established standards while the engine operates in its intended environment.ResponsibilitiesPrepare test plans, execute development tests and perform complex analysis of Engine and Aftertreatment systems and their controls.Focus on Engine and Aftertreatment calibration activities to meet functional and performance related requirements.Document and e
show job details
sytem integration engineer
- eindhoven, noord-brabant
- permanent
- €5,000 per month
As Line Lead Engineer within the System Integration team, you are responsible for planning and report-out of testing- and development activities over various engine development projects, as well as leading technical discussion within the development organization and with suppliersYour responsibilities and goals:Help shape the System Integration team such that project targets are met within the applicable constraintsPrioritize and plan test- and development
posted 17 february 2026
As Line Lead Engineer within the System Integration team, you are responsible for planning and report-out of testing- and development activities over various engine development projects, as well as leading technical discussion within the development organization and with suppliersYour responsibilities and goals:Help shape the System Integration team such that project targets are met within the applicable constraintsPrioritize and plan test- and development
show job details
calibration verification engineer
- eindhoven, noord-brabant
- permanent
- €5,000 per month
As an emission verification engineer, you will be part of a team which verifies our best-in-class engines and after treatments on emission performance under all conditions within the defined constraints.Your tasksDevelop heavy-duty diesel engines with focus on engine emission and after treatment performance verificationVerify integrated performance of many engine and after treatment functions with the team, all with the goal to prove optimal fuel economy a
posted 17 february 2026
As an emission verification engineer, you will be part of a team which verifies our best-in-class engines and after treatments on emission performance under all conditions within the defined constraints.Your tasksDevelop heavy-duty diesel engines with focus on engine emission and after treatment performance verificationVerify integrated performance of many engine and after treatment functions with the team, all with the goal to prove optimal fuel economy a
show job details

Thank you for subscribing to your personalised job alerts.

You need to enable JavaScript to run this app.

manufacturing engineer.

job details

experience

skills

qualifications

share this job.

the application process.

apply with randstad.

we'll give you a call.

getting you registered.

compliance check.

reference and background check.

the perfect job for you.

the interview.

start your new job.

related jobs.

hydrogen combustion engine calibration engineer

sytem integration engineer

calibration verification engineer

let similar jobs come to you