I am urgently looking for a senior hardware engineer for a company in Northampton. Your roles and Responsibilities will be: - Hardware products including analogue and digital designs.-Schematic design and PCB layout, including component level footprint design. Ideally proficient with Altium PCB design tools- First article testing of designs and investigation and resolution of any hardware issues- Liaising with manufactures on any production related issues. In terms of skill sets we are looking for: - Analogue & Digital Circuit Design- PCB Layout / Schematic Capture- Embedded Software Experience- Relevant Engineering Degree This role will require all candidates to be eligible for SC clearance. The role is paying up to £50,000 ( possibly more for the perfect individual) and they are looking to arrange interviews ASAP. Please send your CV through to danny.young@randstad.co.uk Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
I am urgently looking for a senior hardware engineer for a company in Northampton. Your roles and Responsibilities will be: - Hardware products including analogue and digital designs.-Schematic design and PCB layout, including component level footprint design. Ideally proficient with Altium PCB design tools- First article testing of designs and investigation and resolution of any hardware issues- Liaising with manufactures on any production related issues. In terms of skill sets we are looking for: - Analogue & Digital Circuit Design- PCB Layout / Schematic Capture- Embedded Software Experience- Relevant Engineering Degree This role will require all candidates to be eligible for SC clearance. The role is paying up to £50,000 ( possibly more for the perfect individual) and they are looking to arrange interviews ASAP. Please send your CV through to danny.young@randstad.co.uk Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Production Quality EngineerAn opportunity has arisen for us to recruit for a worldwide leader in material manufacture. We are currently looking for a Quality Engineer to join the team, at their site in Corby. The RoleAs a Production Quality Engineer, you will provide a technical and quality service for the manufacturing functions, delivering value to customers and the business through furthering our understanding of, and targeting the reduction and resolution of common cause issues.In this capacity you will contribute to improving capability to expand into our chosen high-value Mechanical Equipment markets.Your key accountabilities, will include but not be limited to the following:To plan work programmes to achieve a project objective within the teamTo manage work plans to meet deliverables, overcoming barriers to progressTo liaise with experts both across the company and with Customers to develop work programmes as appropriate, to achieve project objectivesTo use Data analysis and analytical skills to develop knowledge useful to the problemTo coach peer groups on key skills and others to consolidate and improve team performanceTo develop support work from specialist functions like R&D, CTS and CommercialTo lead team members, or colleagues across the business, on activities within the work stream you are responsible for, including on occasions leading a full project teamTo become fully conversant with the production process in order to identify cost effective solutionsTo lead the implementation stage of the corrective actions - i.e. project manage any new equipment installations or roll out of new processes into production whilst overcoming any barriers to progressTo interpret customer complaints and identify practical solutions to permanently resolve problems and prevent re-occurrenceTo convert existing proposals into fully workable solutions (existing FMEA)To conduct System, Process and Product Audits as and when required by the Quality Systems Manager. The CandidateYou will be qualified to Degree or HNC level (or equivalent) in a Mechanical, Electrical or Production Engineering discipline with proven experience of working in a manufacturing, engineering or quality environment.You should be conversant with current quality tools, specifically - Root Cause Analysis, Problem Solving, 5 Why's Analysis, 8D reports, Design FMEA and Process FMEA techniques.You should have a sound knowledge of the steel industry. The Benefits35 days holidays per annumAnnual Pay ReviewAnnual Bonus Scheme - subject to business performancePrivate Healthcare Scheme (Individual cover)One of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Production Quality EngineerAn opportunity has arisen for us to recruit for a worldwide leader in material manufacture. We are currently looking for a Quality Engineer to join the team, at their site in Corby. The RoleAs a Production Quality Engineer, you will provide a technical and quality service for the manufacturing functions, delivering value to customers and the business through furthering our understanding of, and targeting the reduction and resolution of common cause issues.In this capacity you will contribute to improving capability to expand into our chosen high-value Mechanical Equipment markets.Your key accountabilities, will include but not be limited to the following:To plan work programmes to achieve a project objective within the teamTo manage work plans to meet deliverables, overcoming barriers to progressTo liaise with experts both across the company and with Customers to develop work programmes as appropriate, to achieve project objectivesTo use Data analysis and analytical skills to develop knowledge useful to the problemTo coach peer groups on key skills and others to consolidate and improve team performanceTo develop support work from specialist functions like R&D, CTS and CommercialTo lead team members, or colleagues across the business, on activities within the work stream you are responsible for, including on occasions leading a full project teamTo become fully conversant with the production process in order to identify cost effective solutionsTo lead the implementation stage of the corrective actions - i.e. project manage any new equipment installations or roll out of new processes into production whilst overcoming any barriers to progressTo interpret customer complaints and identify practical solutions to permanently resolve problems and prevent re-occurrenceTo convert existing proposals into fully workable solutions (existing FMEA)To conduct System, Process and Product Audits as and when required by the Quality Systems Manager. The CandidateYou will be qualified to Degree or HNC level (or equivalent) in a Mechanical, Electrical or Production Engineering discipline with proven experience of working in a manufacturing, engineering or quality environment.You should be conversant with current quality tools, specifically - Root Cause Analysis, Problem Solving, 5 Why's Analysis, 8D reports, Design FMEA and Process FMEA techniques.You should have a sound knowledge of the steel industry. The Benefits35 days holidays per annumAnnual Pay ReviewAnnual Bonus Scheme - subject to business performancePrivate Healthcare Scheme (Individual cover)One of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Graduate Electronics Design EngineerNorthamptonA client of mine, based in Northampton, are seeking an enthusiastic, self-motivated graduate level electronics engineer to assist the existing design team. The opportunity will exist to gain experience in the design of electronic circuits, RF circuits, firmware and software.You will be part of a dynamic engineering team who continually develop world beating products for the aerospace and defence markets.Primary ResponsibilitiesDesign and layout of electronic circuitsDeveloping firmware on Enterprise Control Systems printed circuit boards using C, C++ and VHDProduce manufacturing documents such as requirement specifications, part lists, circuit diagrams and test documentationLiaise with other departments to assist with product manufacture and fault findingThis is an exciting opportunity for a recently graduated engineer looking to get into their first role in the industry. The Engineering team are a small, tight-knit workforce who specialise in the design of some of the most exciting products in the military and defence sectors.Please get in touch immediately if this role look of interest to you and I will call to discuss. Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Graduate Electronics Design EngineerNorthamptonA client of mine, based in Northampton, are seeking an enthusiastic, self-motivated graduate level electronics engineer to assist the existing design team. The opportunity will exist to gain experience in the design of electronic circuits, RF circuits, firmware and software.You will be part of a dynamic engineering team who continually develop world beating products for the aerospace and defence markets.Primary ResponsibilitiesDesign and layout of electronic circuitsDeveloping firmware on Enterprise Control Systems printed circuit boards using C, C++ and VHDProduce manufacturing documents such as requirement specifications, part lists, circuit diagrams and test documentationLiaise with other departments to assist with product manufacture and fault findingThis is an exciting opportunity for a recently graduated engineer looking to get into their first role in the industry. The Engineering team are a small, tight-knit workforce who specialise in the design of some of the most exciting products in the military and defence sectors.Please get in touch immediately if this role look of interest to you and I will call to discuss. Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Electrical Engineer An opportunity has arisen for us to recruit for a worldwide leader in material manufacture. We are currently looking for an Electrical Engineer to join the team at their site in Corby. The RoleYour key responsibilities, will include, but not be limited to the following:Provide engineering expertise & advise in order to diagnose and correct complex faults in the manufacturing process equipment.Ensure that Electrical maintenance work undertaken is completed to time and to appropriate safety and Engineering standards.Develop expertise and keep up to date in maintenance techniques and equipment development applicable to a heavy manufacturing environment by self-study and attendance on appropriate courses.Provide comprehensive reports on breakdowns, repairs and related engineering activities where appropriate recommending improvements to equipment or systems.Undertake training as required for new specialists, other engineering grades, and manufacturing teams.Supervise Tata or contract personnel and where necessary issue certificates of isolation as part of the safe system of work.Where necessary to provide cover for shift specialists.Be specifically familiar with many modern day electrical systems including PLC's, Drives, AC & DC motor circuitry and be able to read and interpret electrical wiring and schematic drawings. You will be responsible for ensuring all activity is undertaken within Health, Safety and Environmental requirements, in Compliance with company and legislative requirements. Working as part of a team, you will ensure manufacturing performance is maintained on an ongoing basis and support manufacturing development plans, identifying opportunities for improvement. The CandidateAs an Electrical technician, you will ideally be qualified to HNC level, which will normally have obtained through a craft apprenticeship in electrical / process control engineering, or hold a Modern Engineering Certificate.You will require relevant plant experience in electrical engineering or process control and be capable of supervising personnel in the safe execution of engineering repair work. The BenefitsA market competitive salary35 days holidays per annumQuarterly Bonus - subject to business performanceOne of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Electrical Engineer An opportunity has arisen for us to recruit for a worldwide leader in material manufacture. We are currently looking for an Electrical Engineer to join the team at their site in Corby. The RoleYour key responsibilities, will include, but not be limited to the following:Provide engineering expertise & advise in order to diagnose and correct complex faults in the manufacturing process equipment.Ensure that Electrical maintenance work undertaken is completed to time and to appropriate safety and Engineering standards.Develop expertise and keep up to date in maintenance techniques and equipment development applicable to a heavy manufacturing environment by self-study and attendance on appropriate courses.Provide comprehensive reports on breakdowns, repairs and related engineering activities where appropriate recommending improvements to equipment or systems.Undertake training as required for new specialists, other engineering grades, and manufacturing teams.Supervise Tata or contract personnel and where necessary issue certificates of isolation as part of the safe system of work.Where necessary to provide cover for shift specialists.Be specifically familiar with many modern day electrical systems including PLC's, Drives, AC & DC motor circuitry and be able to read and interpret electrical wiring and schematic drawings. You will be responsible for ensuring all activity is undertaken within Health, Safety and Environmental requirements, in Compliance with company and legislative requirements. Working as part of a team, you will ensure manufacturing performance is maintained on an ongoing basis and support manufacturing development plans, identifying opportunities for improvement. The CandidateAs an Electrical technician, you will ideally be qualified to HNC level, which will normally have obtained through a craft apprenticeship in electrical / process control engineering, or hold a Modern Engineering Certificate.You will require relevant plant experience in electrical engineering or process control and be capable of supervising personnel in the safe execution of engineering repair work. The BenefitsA market competitive salary35 days holidays per annumQuarterly Bonus - subject to business performanceOne of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Electrical Engineer An opportunity has arisen for us to recruit for a worldwide leader in raw material manufacturer. We are currently looking for a Electrical Team Leader to join the team, at their site in Corby. This postition is on a continental shift pattern. The RoleAs the Electrical Team Leader, you will work as part of a team, reporting directly into the Electrical Services Engineering Manager, providing technical engineering expertise to the Corby site 24 hours a day, 365 days a year, to ensure the safe production of quality tubes and the achievement of equipment availability and capability targets. In this capacity, you will also manage the daily operations of the Systems department supporting the team leader to ensure that systems are maintained in accordance with standards and policies.Your key responsibilities will include, but not be limited to the following:Responsible for ensuring that engineering activities are conducted in accordance with the Engineering policy; health & Safety standards; statutory regulations and applicable ISO standards and Codes of Practice.Actively manage engineering expenditure and develop budgets.Responsible for the management and execution of all preventive, corrective, breakdown and shutdown maintenance controlled by the central electrical function, as per the SAP Business processes.Ensure that all assets within the designated areas of responsibility are maintained to high engineering standards, which consistently contribute to achieving business objectives.Identify and implement improvement activities that support the continuous improvement of plant availability, safety, the environment and asset performance.Lead or participate in project teams, executing engineering projects to the allocated budget, timescale and stated objectives.Responsible for the management of spares, including repairable stock items (as per the SAP Refurbishment of Spares Business Process).Management of both external and internal engineering resources, including technical supervision, training and competency development.To set, implement and maintain standards for equipment controlled by the systems department.To manage overtime and sickness absence for members of the Systems department.Respond to the works alarm systems and provide solutions for plant and engineering safety The CandidateTo be considered for this opportunity, you must be a qualified electrical engineer (or equivalent by experience), ideally qualified to HNC level as a minimum, with man management experience of working within a manufacturing environment. You will also require the following:Experience with low voltage & high voltage electrical systems, drives, PLCs and Environmental control systems.Competent at fault-finding electrical systems and root cause failure analysis of electrical engineering related failures as required.Experience of working with computerised maintenance management systems (SAP PM experience would be advantageous)Basic computer literacy is essential.Good communication skill and the ability to function effectively within teams. The Benefits54 days holidays per yearQuarterly Bonus - subject to business performanceOne of the UK's leading pension schemes (10% employer contribution / 6% employee contribution)Private HealthcareAnnual Pay Review Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Electrical Engineer An opportunity has arisen for us to recruit for a worldwide leader in raw material manufacturer. We are currently looking for a Electrical Team Leader to join the team, at their site in Corby. This postition is on a continental shift pattern. The RoleAs the Electrical Team Leader, you will work as part of a team, reporting directly into the Electrical Services Engineering Manager, providing technical engineering expertise to the Corby site 24 hours a day, 365 days a year, to ensure the safe production of quality tubes and the achievement of equipment availability and capability targets. In this capacity, you will also manage the daily operations of the Systems department supporting the team leader to ensure that systems are maintained in accordance with standards and policies.Your key responsibilities will include, but not be limited to the following:Responsible for ensuring that engineering activities are conducted in accordance with the Engineering policy; health & Safety standards; statutory regulations and applicable ISO standards and Codes of Practice.Actively manage engineering expenditure and develop budgets.Responsible for the management and execution of all preventive, corrective, breakdown and shutdown maintenance controlled by the central electrical function, as per the SAP Business processes.Ensure that all assets within the designated areas of responsibility are maintained to high engineering standards, which consistently contribute to achieving business objectives.Identify and implement improvement activities that support the continuous improvement of plant availability, safety, the environment and asset performance.Lead or participate in project teams, executing engineering projects to the allocated budget, timescale and stated objectives.Responsible for the management of spares, including repairable stock items (as per the SAP Refurbishment of Spares Business Process).Management of both external and internal engineering resources, including technical supervision, training and competency development.To set, implement and maintain standards for equipment controlled by the systems department.To manage overtime and sickness absence for members of the Systems department.Respond to the works alarm systems and provide solutions for plant and engineering safety The CandidateTo be considered for this opportunity, you must be a qualified electrical engineer (or equivalent by experience), ideally qualified to HNC level as a minimum, with man management experience of working within a manufacturing environment. You will also require the following:Experience with low voltage & high voltage electrical systems, drives, PLCs and Environmental control systems.Competent at fault-finding electrical systems and root cause failure analysis of electrical engineering related failures as required.Experience of working with computerised maintenance management systems (SAP PM experience would be advantageous)Basic computer literacy is essential.Good communication skill and the ability to function effectively within teams. The Benefits54 days holidays per yearQuarterly Bonus - subject to business performanceOne of the UK's leading pension schemes (10% employer contribution / 6% employee contribution)Private HealthcareAnnual Pay Review Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
I am looking for an enthusiastic, self-motivated graduate level electronics engineer to assist the existing design team. The opportunity will exist to gain experience in the design of electronic circuits, RF circuits, firmware and software.You will be part of a dynamic engineering team who continually develop world beating products for the aerospace and defence markets.You will be supported in your continuing professional development and will be encouraged to work towards ChartershipResponsibilitiesDesign and layout of electronic circuits.Developing firmware on printed circuit boards using C, C++ and VHDL.Produce manufacturing documents such as requirement specifications, part lists, circuit diagrams and test documentation.Liaise with other departments to assist with product manufacture and fault finding. SkillsSound knowledge of C or C++ and ideally VHDL.Electronic circuit design and layout.Sound knowledge of electronic principles and techniques.Good analytical skills.British Citizen due to required security clearanceDesirableBasic RF knowledge would be desirable.Ability to complete projects including all necessary paperwork.CompanyMy client is an expert in surveillance and RF jamming disciplines to develop innovative system solutions to counter the latest and ever-increasing security threats. Please send your CV to Fin . Gillon @ randstad.co .uk Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
I am looking for an enthusiastic, self-motivated graduate level electronics engineer to assist the existing design team. The opportunity will exist to gain experience in the design of electronic circuits, RF circuits, firmware and software.You will be part of a dynamic engineering team who continually develop world beating products for the aerospace and defence markets.You will be supported in your continuing professional development and will be encouraged to work towards ChartershipResponsibilitiesDesign and layout of electronic circuits.Developing firmware on printed circuit boards using C, C++ and VHDL.Produce manufacturing documents such as requirement specifications, part lists, circuit diagrams and test documentation.Liaise with other departments to assist with product manufacture and fault finding. SkillsSound knowledge of C or C++ and ideally VHDL.Electronic circuit design and layout.Sound knowledge of electronic principles and techniques.Good analytical skills.British Citizen due to required security clearanceDesirableBasic RF knowledge would be desirable.Ability to complete projects including all necessary paperwork.CompanyMy client is an expert in surveillance and RF jamming disciplines to develop innovative system solutions to counter the latest and ever-increasing security threats. Please send your CV to Fin . Gillon @ randstad.co .uk Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Customer Service Advisor Are you passionate about customer service and looking for your next position? Would you like to work for a world wide business? If so then this is the job for you.Our client is looking for a Customer Service Representative in the Corby area, with rates starting at £10 per hour. This exciting Customer Service role offers a fun, fast working environment within a global organisation that is one of the best in the industry. Hours are to include Monday to Friday 8.30 to 5.30pm. The responsibilities of this Corby based role include:Answer inbound customer calls Make outbound calls to pre existing customersAdministration TasksClient Visits The benefits of this exciting role include:Exciting work environmentAnnual Pay IncreaseFree onsite carpark Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Customer Service Advisor Are you passionate about customer service and looking for your next position? Would you like to work for a world wide business? If so then this is the job for you.Our client is looking for a Customer Service Representative in the Corby area, with rates starting at £10 per hour. This exciting Customer Service role offers a fun, fast working environment within a global organisation that is one of the best in the industry. Hours are to include Monday to Friday 8.30 to 5.30pm. The responsibilities of this Corby based role include:Answer inbound customer calls Make outbound calls to pre existing customersAdministration TasksClient Visits The benefits of this exciting role include:Exciting work environmentAnnual Pay IncreaseFree onsite carpark Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.