7 jobs found in Leeds, West Yorkshire

filter4
clear all
    • leeds, west yorkshire
    • permanent
    • £70,000 - £150,000 per year
    • full-time
    Job title: Design Engineer - Renewable Energy SectorLocation: Leeds - (Flexible WFH)Benefits: Competitve Salary £70k+ DOE, Private healthcare, Bonuses, Remote working Permanent Position We have a new opportunity for an experienced Power System Design Engineer to join our client who specialises in the renewable energy sector. This position will be working from home/ office and client based as and when required by client needs. Responsibilities:Stringent analysis of the present network to identify the challenges faced and to reengineer the electrical scheme to meet the techno / commercial / regulatory needs, in As-Is condition, at all voltage levels from LV to EHV.Design of adequate electrical schemes for futuristic networks including constraint analysis and operation with infusion of DER etc.Carrying out important System Studies namely Load flow and fault level analysis, Protection Coordination, Load Related Network Reinforcement, Demand Forecasting, Voltage stability etc.Analysing / Interpreting the results of the power system simulation software, appropriate for design electrical schemes Prepare the technical design of the futuristic network along with the drawings and the specifications. Summarizing the results of all analytical studies and preparation of technical report Establish logistic evidence for Investment planDeliberation of the technical design, drawings, detailed specification etc. with the customers for acceptance or to understand any deviations to match the local needs. The job done shall be moderated to include the suggestions and finalise the techno economic proposal. Experience:Experience working as a design engineer/manager for a DNO in EHV systems or HV/LV systems will be given high weightagePreparation of Technical design reports for Distribution sector (LV up to EHV/132kV).Working knowledge of Transmission and distribution system including network protection & Re-Enforcement schemes.Conducting power systems studies namely Load flow and fault analysis etc. deploying standard and reputed power system evaluation tools. Experience in using a power flow modelling tool such as IPSA, DINIS, PSSE etc will be beneficial.Analysis of Power Systems studies results and validating them with the historical and ground network / assets performance parameters.Familiarity with creating technical options and corresponding commercial options for the end customers of DNOsGood communication skills with leadership qualities for team working culture, ability to generate techno economic reports with apt writing skills. Minimum of at least 5 years+ experience in a similar position UK DNO'S IS A MUST For further information please contact Adam Shutt on 01489 560 126Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    Job title: Design Engineer - Renewable Energy SectorLocation: Leeds - (Flexible WFH)Benefits: Competitve Salary £70k+ DOE, Private healthcare, Bonuses, Remote working Permanent Position We have a new opportunity for an experienced Power System Design Engineer to join our client who specialises in the renewable energy sector. This position will be working from home/ office and client based as and when required by client needs. Responsibilities:Stringent analysis of the present network to identify the challenges faced and to reengineer the electrical scheme to meet the techno / commercial / regulatory needs, in As-Is condition, at all voltage levels from LV to EHV.Design of adequate electrical schemes for futuristic networks including constraint analysis and operation with infusion of DER etc.Carrying out important System Studies namely Load flow and fault level analysis, Protection Coordination, Load Related Network Reinforcement, Demand Forecasting, Voltage stability etc.Analysing / Interpreting the results of the power system simulation software, appropriate for design electrical schemes Prepare the technical design of the futuristic network along with the drawings and the specifications. Summarizing the results of all analytical studies and preparation of technical report Establish logistic evidence for Investment planDeliberation of the technical design, drawings, detailed specification etc. with the customers for acceptance or to understand any deviations to match the local needs. The job done shall be moderated to include the suggestions and finalise the techno economic proposal. Experience:Experience working as a design engineer/manager for a DNO in EHV systems or HV/LV systems will be given high weightagePreparation of Technical design reports for Distribution sector (LV up to EHV/132kV).Working knowledge of Transmission and distribution system including network protection & Re-Enforcement schemes.Conducting power systems studies namely Load flow and fault analysis etc. deploying standard and reputed power system evaluation tools. Experience in using a power flow modelling tool such as IPSA, DINIS, PSSE etc will be beneficial.Analysis of Power Systems studies results and validating them with the historical and ground network / assets performance parameters.Familiarity with creating technical options and corresponding commercial options for the end customers of DNOsGood communication skills with leadership qualities for team working culture, ability to generate techno economic reports with apt writing skills. Minimum of at least 5 years+ experience in a similar position UK DNO'S IS A MUST For further information please contact Adam Shutt on 01489 560 126Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    • leeds, west yorkshire
    • permanent
    • £44,000 - £50,000 per year
    • full-time
    Point FitterRandstad are excited to announce that we have recently been successful in tendering for the Front Line Labour contract to allow us to supply signalling staff directly to Network Rail alongside our existing client base. We are looking for a dedicated and experienced points fitter to join our growing team.Based on a 40 hour working week £44,000 - £50,000 per annumFull time PAYE position directly employed by Randstad.Successful candidate will benefit from pension and holidays.Training, tools and equipment will be provided, lodging and travel costs covered.Take advantage of our private health insurance, in store and online discounts and much more.Key skills to include;IRSE licenced person preferred, if not support and funding can be offered to gain a licence for the right candidate.Experience working on RCPL, IBCL, MK 3 Clamp locks, HW, HPSS.SMTH competence preferred but not essential.COSS competence preferred.Initial interviews will be conducted over the phone followed by meeting in person for the most suitable candidates.Randstad Construction Property Engineering is acting as an Employment Agency in relation to this vacancy.
    Point FitterRandstad are excited to announce that we have recently been successful in tendering for the Front Line Labour contract to allow us to supply signalling staff directly to Network Rail alongside our existing client base. We are looking for a dedicated and experienced points fitter to join our growing team.Based on a 40 hour working week £44,000 - £50,000 per annumFull time PAYE position directly employed by Randstad.Successful candidate will benefit from pension and holidays.Training, tools and equipment will be provided, lodging and travel costs covered.Take advantage of our private health insurance, in store and online discounts and much more.Key skills to include;IRSE licenced person preferred, if not support and funding can be offered to gain a licence for the right candidate.Experience working on RCPL, IBCL, MK 3 Clamp locks, HW, HPSS.SMTH competence preferred but not essential.COSS competence preferred.Initial interviews will be conducted over the phone followed by meeting in person for the most suitable candidates.Randstad Construction Property Engineering is acting as an Employment Agency in relation to this vacancy.
    • leeds, west yorkshire
    • temporary
    • £240 - £275 per day
    • full-time
    Site Engineer required for checking work on concrete for a large site project providing engineering support. The ideal candidate will have a proven record of setting out and Engineering, and can work with a Leica Total Station. Highways maintenance experience would be preferred also. The role will entail:All setting out on site. The clients site control and setting out services are for the following applications: - Earthworks - Piling - Steelworks - Landscaping - Building footprints - Grid lines - Foundations - Kerbs - Drainage and services Report to the Site AgentTake responsibility for surveying a section of workManage any junior engineers on siteEnsure quality of all surveying doneThe client want someone with experience and willing to integrate within the team well. Contact Brad in the Randstad Leeds office now on:- 0113 246 2503- 07900 612 125 Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    Site Engineer required for checking work on concrete for a large site project providing engineering support. The ideal candidate will have a proven record of setting out and Engineering, and can work with a Leica Total Station. Highways maintenance experience would be preferred also. The role will entail:All setting out on site. The clients site control and setting out services are for the following applications: - Earthworks - Piling - Steelworks - Landscaping - Building footprints - Grid lines - Foundations - Kerbs - Drainage and services Report to the Site AgentTake responsibility for surveying a section of workManage any junior engineers on siteEnsure quality of all surveying doneThe client want someone with experience and willing to integrate within the team well. Contact Brad in the Randstad Leeds office now on:- 0113 246 2503- 07900 612 125 Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    • leeds, west yorkshire
    • permanent
    • £25,000 - £46,000 per year
    • full-time
    Signalling Installer / Team LeaderRandstad are excited to announce that we have recently been successful in tendering for the Front Line Labour contract to allow us to supply signalling staff directly to Network Rail alongside our existing client base. We are looking for experienced Signalling Installation Team Leaders and Installers to join our growing team.Based on 40 hour week Installers £25,000 - £36,000, Team Leaders £36,000 - £46,000Full Time PAYE position directly employed by Randstad.Successful candidate will benefit from pension and holidays.Training, tools and equipment will be provided, lodging and travel costs covered.Take advantage of our private health insurance, in store and online discounts and much more.Job Specific RequirementsIRSE Licencing required / preferred - we are willing to consider none licenced applicants providing there is sufficient evidence of past signalling experience in their IRSE logbook.Support and funding will be provided for IRSE licensing if required.SMTH optional.Installation skills and experience essential.Flexible working days or nights, midweek and weekend.COSS competence desirable.Initial interviews will be conducted over the phone followed by meeting in person for the most suitable candidates.Randstad Construction Property Engineering is acting as an Employment Agency in relation to this vacancy.
    Signalling Installer / Team LeaderRandstad are excited to announce that we have recently been successful in tendering for the Front Line Labour contract to allow us to supply signalling staff directly to Network Rail alongside our existing client base. We are looking for experienced Signalling Installation Team Leaders and Installers to join our growing team.Based on 40 hour week Installers £25,000 - £36,000, Team Leaders £36,000 - £46,000Full Time PAYE position directly employed by Randstad.Successful candidate will benefit from pension and holidays.Training, tools and equipment will be provided, lodging and travel costs covered.Take advantage of our private health insurance, in store and online discounts and much more.Job Specific RequirementsIRSE Licencing required / preferred - we are willing to consider none licenced applicants providing there is sufficient evidence of past signalling experience in their IRSE logbook.Support and funding will be provided for IRSE licensing if required.SMTH optional.Installation skills and experience essential.Flexible working days or nights, midweek and weekend.COSS competence desirable.Initial interviews will be conducted over the phone followed by meeting in person for the most suitable candidates.Randstad Construction Property Engineering is acting as an Employment Agency in relation to this vacancy.
    • leeds, west yorkshire
    • temp to perm
    • £80,000 - £150,000, per year, Travel, equipment, location, working from home
    • full-time
    Job title: Power System Engineer - Renewable Energy SectorLocation: Leeds - Home working/ Head office/ Client travel (When required)Permanent Position We have a new opportunity for an experienced Design Engineer to join our client who specialises in the renewable energy sector. This position will be working from home/ office and client based as and when required by client needs. Responsibilities:Stringent analysis of the present network to identify the challenges faced and to reengineer the electrical scheme to meet the techno / commercial / regulatory needs, in As-Is condition, at all voltage levels from LV to EHV.Design of adequate electrical schemes for futuristic networks including constraint analysis and operation with infusion of DER etc.Carrying out important System Studies namely Load flow and fault level analysis, Protection Coordination, Load Related Network Reinforcement, Demand Forecasting, Voltage stability etc.Analysing / Interpreting the results of the power system simulation software, appropriate for design electrical schemes Prepare the technical design of the futuristic network along with the drawings and the specifications. Summarizing the results of all analytical studies and preparation of technical report Establish logistic evidence for Investment planDeliberation of the technical design, drawings, detailed specification etc. with the customers for acceptance or to understand any deviations to match the local needs. The job done shall be moderated to include the suggestions and finalise the techno economic proposal. Experience:Experience working as a design engineer/manager for a DNO in EHV systems or HV/LV systems will be given high weightagePreparation of Technical design reports for Distribution sector (LV up to EHV/132kV).Working knowledge of Transmission and distribution system including network protection & Re-Enforcement schemes.Conducting power systems studies namely Load flow and fault analysis etc. deploying standard and reputed power system evaluation tools. Experience in using a power flow modelling tool such as IPSA, DINIS, PSSE etc will be beneficial.Analysis of Power Systems studies results and validating them with the historical and ground network / assets performance parameters.Familiarity with creating technical options and corresponding commercial options for the end customers of DNOsGood communication skills with leadership qualities for team working culture, ability to generate techno economic reports with apt writing skills. Minimum of at least 5 years+ experience in a similar position For further information please contact Adam Shutt on 01489 560 126Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    Job title: Power System Engineer - Renewable Energy SectorLocation: Leeds - Home working/ Head office/ Client travel (When required)Permanent Position We have a new opportunity for an experienced Design Engineer to join our client who specialises in the renewable energy sector. This position will be working from home/ office and client based as and when required by client needs. Responsibilities:Stringent analysis of the present network to identify the challenges faced and to reengineer the electrical scheme to meet the techno / commercial / regulatory needs, in As-Is condition, at all voltage levels from LV to EHV.Design of adequate electrical schemes for futuristic networks including constraint analysis and operation with infusion of DER etc.Carrying out important System Studies namely Load flow and fault level analysis, Protection Coordination, Load Related Network Reinforcement, Demand Forecasting, Voltage stability etc.Analysing / Interpreting the results of the power system simulation software, appropriate for design electrical schemes Prepare the technical design of the futuristic network along with the drawings and the specifications. Summarizing the results of all analytical studies and preparation of technical report Establish logistic evidence for Investment planDeliberation of the technical design, drawings, detailed specification etc. with the customers for acceptance or to understand any deviations to match the local needs. The job done shall be moderated to include the suggestions and finalise the techno economic proposal. Experience:Experience working as a design engineer/manager for a DNO in EHV systems or HV/LV systems will be given high weightagePreparation of Technical design reports for Distribution sector (LV up to EHV/132kV).Working knowledge of Transmission and distribution system including network protection & Re-Enforcement schemes.Conducting power systems studies namely Load flow and fault analysis etc. deploying standard and reputed power system evaluation tools. Experience in using a power flow modelling tool such as IPSA, DINIS, PSSE etc will be beneficial.Analysis of Power Systems studies results and validating them with the historical and ground network / assets performance parameters.Familiarity with creating technical options and corresponding commercial options for the end customers of DNOsGood communication skills with leadership qualities for team working culture, ability to generate techno economic reports with apt writing skills. Minimum of at least 5 years+ experience in a similar position For further information please contact Adam Shutt on 01489 560 126Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    • leeds, west yorkshire
    • temporary
    • competitive
    • full-time
    Site Engineer required for checking work on concrete for a large site project providing engineering support. The ideal candidate will have a proven record of setting out and Engineering, and can work with a Leica Total Station. Highways maintenance experience would be preferred also. The role will entail:All setting out on siteReport to the Site AgentTake responsibility for surveying a section of workManage any junior engineers on siteEnsure quality of all surveying doneThe client are offering a competite day rate with hourly pay for any extra hours you work in the day. They want someone with experience and willing to integrate within the team well. Contact Brad in the Randstad Leeds office now on:- 0113 246 2503- 07900 612 125 Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    Site Engineer required for checking work on concrete for a large site project providing engineering support. The ideal candidate will have a proven record of setting out and Engineering, and can work with a Leica Total Station. Highways maintenance experience would be preferred also. The role will entail:All setting out on siteReport to the Site AgentTake responsibility for surveying a section of workManage any junior engineers on siteEnsure quality of all surveying doneThe client are offering a competite day rate with hourly pay for any extra hours you work in the day. They want someone with experience and willing to integrate within the team well. Contact Brad in the Randstad Leeds office now on:- 0113 246 2503- 07900 612 125 Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    • leeds, west yorkshire
    • permanent
    • £44,000 - £50,000 per year
    • full-time
    SMTH Randstad are excited to announce that we have recently been successful in tendering for the Front Line Labour contract to allow us to supply signalling staff directly to Network Rail alongside our existing client base. We are looking for motivated SMTH competent people to join our growing teamBased on a 40 hour working week £44,000 - £50,000 per annumFull Time PAYE position directly employed by Randstad.Successful candidate will benefit from pension and holidays.Training, tools and equipment will be provided, lodging and travel costs covered.Take advantage of our private health insurance, in store and online discounts and much more.Job Specific RequirementsIRSE Licencing required / preferred - we are willing to consider none licenced applicants providing there is sufficient evidence of past signalling experience in their IRSE logbook.Support and funding will be provided for IRSE licensing if required.SMTH required.Installation skills desirable.Flexible working days or nights, midweek and weekend.COSS competence desirable.Initial interviews will be conducted over the phone followed by meeting in person for the most suitable candidates.Randstad Construction Property Engineering is acting as an Employment Agency in relation to this vacancy.
    SMTH Randstad are excited to announce that we have recently been successful in tendering for the Front Line Labour contract to allow us to supply signalling staff directly to Network Rail alongside our existing client base. We are looking for motivated SMTH competent people to join our growing teamBased on a 40 hour working week £44,000 - £50,000 per annumFull Time PAYE position directly employed by Randstad.Successful candidate will benefit from pension and holidays.Training, tools and equipment will be provided, lodging and travel costs covered.Take advantage of our private health insurance, in store and online discounts and much more.Job Specific RequirementsIRSE Licencing required / preferred - we are willing to consider none licenced applicants providing there is sufficient evidence of past signalling experience in their IRSE logbook.Support and funding will be provided for IRSE licensing if required.SMTH required.Installation skills desirable.Flexible working days or nights, midweek and weekend.COSS competence desirable.Initial interviews will be conducted over the phone followed by meeting in person for the most suitable candidates.Randstad Construction Property Engineering is acting as an Employment Agency in relation to this vacancy.

It looks like you want to switch your language. This will reset your filters on your current job search.