You are successfully logged out of your my randstad account

You have successfully deleted your account

16 jobs found in Alberta

filter4
clear all
    • calgary, alberta
    • permanent
    Your Challenge!This is a Fully Qualified Operator position, the operator is expected to understand, operate and maintain mobile and stationary equipment (e.g. balers, etc.) utilized within the plant. The operator has demonstrated the ability to safely and efficiently operate one of the following equipment, skid steer forklifts and/or balers. This could include removing bales from the two balers, load or unload trucks and trailers and grade, scale and document materials that have been received or shipped.Roles & Responsibilities  Ensure compliance with all Company policies, OH & S Legislation and WCB reporting procedures.  Follow the preventative maintenance program for all stationary and mobile equipment including completing allsupporting documentation and immediately report any defects which may jeopardize the safe operation of the equipment. Understand and maintain quality and production standards and work to achieve established production goals.  Maintain clear and safe access to dumping areas for incoming vehicles.  May be required to perform pre-sorting duties on the floor.  This may include opening bags, removing largeitems, removing garbage, etc.  May be required to perform traffic control duties for incoming vehicles.   Report any contamination issues to the Production Supervisor.  Report any issues with operation of conveyors, traffic congestion, safety concerns, etc. to the Lead Hand and/or Supervisors.  Communicate effectively with the Production Supervisor and/or the Production Manager, to minimize errors and maximize production.  Assists with direction and provides instruction on safety, production and quality issues to other staff as instructed.  Trouble shoot problems with the equipment as required.  Complete daily housekeeping assignments Qualifications Education:•    Counterbalance Forklift, Skid Steer and or Loader certification considered to be an asset.•    Candidate must have a good knowledge of paper grades, shipping and receiving requirements and all plant operations, policies and safety procedures. Skills/Experience: •    Strong communication skills•    Must be self-motivated and be able to work independently•    Basic mechanical ability•    Must be able to operate all required equipment in the department•    Demonstrated experience in a plant environment. WORK ENVIRONMENT: •    Normal recycling plant work environment. 
    Your Challenge!This is a Fully Qualified Operator position, the operator is expected to understand, operate and maintain mobile and stationary equipment (e.g. balers, etc.) utilized within the plant. The operator has demonstrated the ability to safely and efficiently operate one of the following equipment, skid steer forklifts and/or balers. This could include removing bales from the two balers, load or unload trucks and trailers and grade, scale and document materials that have been received or shipped.Roles & Responsibilities  Ensure compliance with all Company policies, OH & S Legislation and WCB reporting procedures.  Follow the preventative maintenance program for all stationary and mobile equipment including completing allsupporting documentation and immediately report any defects which may jeopardize the safe operation of the equipment. Understand and maintain quality and production standards and work to achieve established production goals.  Maintain clear and safe access to dumping areas for incoming vehicles.  May be required to perform pre-sorting duties on the floor.  This may include opening bags, removing largeitems, removing garbage, etc.  May be required to perform traffic control duties for incoming vehicles.   Report any contamination issues to the Production Supervisor.  Report any issues with operation of conveyors, traffic congestion, safety concerns, etc. to the Lead Hand and/or Supervisors.  Communicate effectively with the Production Supervisor and/or the Production Manager, to minimize errors and maximize production.  Assists with direction and provides instruction on safety, production and quality issues to other staff as instructed.  Trouble shoot problems with the equipment as required.  Complete daily housekeeping assignments Qualifications Education:•    Counterbalance Forklift, Skid Steer and or Loader certification considered to be an asset.•    Candidate must have a good knowledge of paper grades, shipping and receiving requirements and all plant operations, policies and safety procedures. Skills/Experience: •    Strong communication skills•    Must be self-motivated and be able to work independently•    Basic mechanical ability•    Must be able to operate all required equipment in the department•    Demonstrated experience in a plant environment. WORK ENVIRONMENT: •    Normal recycling plant work environment. 
    • calgary, alberta
    • permanent
    Your Challenge!Cascades Recovery+ currently has an opening for a full time Maintenance Technician Assistant at our Calgary Recycling Plant  working the graveyard shift from 9:00pm - 6:00am.Reporting to the Maintenance Supervisor, the Maintenance Technician Assistant will work with a Maintenance Technician to perform the preventative maintenance activities, complete various repair and maintenance projects within the Plant and work on large projects (as required).Job ResponsibilitiesWorking with Maintenance Technician to perform preventative maintenance activitiesComplete repairs using a variety of methodsWelding as required  QualificationsPossess a related mechanical discipline and/or equivalent related technical training and experience considered an asset.Welding experience considered an asset.Mechanical aptitude. Must be able to work well in an unsupervised environment and as part of a project team. Proven ability with emphasis on safety and reliability. Must be well organized. Good communications and interpersonal skills. Must be aware of all safety standards and requirements for maintenance work. Cascades Recovery+, an SPG business unit, secures the supply of raw materials for Cascades and external mills, in its position as market leader in the discarded materials industry. #revealyourpotential #LifeAtCascadesCascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner. Use of the masculine in our communications refersequally to both women and men.About CascadesTo be part of Cascades is to reveal the full potential of materials, people and ideas. We are source of possibilities. Since 1964, we have been providing sustainable, innovative and value-creating solutions in packaging, hygieneand recovery.Join 12,000 women and men working in a network of more than 90 operating units located in North America and Europe.
    Your Challenge!Cascades Recovery+ currently has an opening for a full time Maintenance Technician Assistant at our Calgary Recycling Plant  working the graveyard shift from 9:00pm - 6:00am.Reporting to the Maintenance Supervisor, the Maintenance Technician Assistant will work with a Maintenance Technician to perform the preventative maintenance activities, complete various repair and maintenance projects within the Plant and work on large projects (as required).Job ResponsibilitiesWorking with Maintenance Technician to perform preventative maintenance activitiesComplete repairs using a variety of methodsWelding as required  QualificationsPossess a related mechanical discipline and/or equivalent related technical training and experience considered an asset.Welding experience considered an asset.Mechanical aptitude. Must be able to work well in an unsupervised environment and as part of a project team. Proven ability with emphasis on safety and reliability. Must be well organized. Good communications and interpersonal skills. Must be aware of all safety standards and requirements for maintenance work. Cascades Recovery+, an SPG business unit, secures the supply of raw materials for Cascades and external mills, in its position as market leader in the discarded materials industry. #revealyourpotential #LifeAtCascadesCascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner. Use of the masculine in our communications refersequally to both women and men.About CascadesTo be part of Cascades is to reveal the full potential of materials, people and ideas. We are source of possibilities. Since 1964, we have been providing sustainable, innovative and value-creating solutions in packaging, hygieneand recovery.Join 12,000 women and men working in a network of more than 90 operating units located in North America and Europe.
    • nisku, alberta
    • permanent
    Are you driven for continuous development from a workplace? Are you a hands-on leader who enjoys building relationships with your team and leading by example? If this all applies to you then read on! We are excited to announce that our client in Nisku is hiring for a Yard Supervisor. Reporting to the Yard Manager the yard supervisor is responsible for many safety & quality initiatives, customer service, training, operational performance, and efficiency in their division. This role will direct workflow for the site Loader Operators and support Machining and Inspection Operation Managers to ensure optimal workflow and job execution in the Yard.Advantages- Autonomy within the role- Competitive pay- Full benefits- RRSP plan- 90% Indoors - Day shift 6 AM - 3 PM Monday to Friday - Advancement opportunitiesResponsibilities- Leads safety initiatives, and represents corporate safety reputation.- Supports the Machining and Inspection Operation Managers and assists in communicating company values, strategies and objectives while assessing operational performance efficiency.- Ensures yard is maintained by yard staff.- Ensures all movement in the yard is tracked and recorded in the inventory program.- Ensures all customer inventory (tubulars, protectors, subs, couplings etc.) is accurate.- On-call when required. - Leads and promotes safety initiatives.- Acts as the main contact for pipe movement within the yard.- Tracks inventory utilizing in the house computer system- Maintains service reputation and customer satisfaction in the yard with proper and timely job execution.- Completes formal monthly documented site inspections and assists in completing follow-up.Qualifications- High school diploma.- Minimum 3-5 years experience with OCTG tubulars.- Minimum 3-5 years’ experience supervisory experience.- Loader Operator experience required- Fork Lift Ticket is recommended - Strong communication skills.- Minimum 5 years experience working with inventory programs.- Demonstrated ability to develop and maintain a strong safety culture.SummaryIf you think you could be exactly who we are looking for, please reach out directly to us today! This position will not be available for long!We thank all applicants for applying. Only those who are qualified will be contacted for an interview.Please note that due to the COVID-19 government regulations in place our offices are temporarily closed.However, please apply via this application link alternatively you can email Moumen.etbail@randstad.ca or kevin.nguyen@randstad.caLooking forward to hearing from you!Warm Regards,Moumen EtbailRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Are you driven for continuous development from a workplace? Are you a hands-on leader who enjoys building relationships with your team and leading by example? If this all applies to you then read on! We are excited to announce that our client in Nisku is hiring for a Yard Supervisor. Reporting to the Yard Manager the yard supervisor is responsible for many safety & quality initiatives, customer service, training, operational performance, and efficiency in their division. This role will direct workflow for the site Loader Operators and support Machining and Inspection Operation Managers to ensure optimal workflow and job execution in the Yard.Advantages- Autonomy within the role- Competitive pay- Full benefits- RRSP plan- 90% Indoors - Day shift 6 AM - 3 PM Monday to Friday - Advancement opportunitiesResponsibilities- Leads safety initiatives, and represents corporate safety reputation.- Supports the Machining and Inspection Operation Managers and assists in communicating company values, strategies and objectives while assessing operational performance efficiency.- Ensures yard is maintained by yard staff.- Ensures all movement in the yard is tracked and recorded in the inventory program.- Ensures all customer inventory (tubulars, protectors, subs, couplings etc.) is accurate.- On-call when required. - Leads and promotes safety initiatives.- Acts as the main contact for pipe movement within the yard.- Tracks inventory utilizing in the house computer system- Maintains service reputation and customer satisfaction in the yard with proper and timely job execution.- Completes formal monthly documented site inspections and assists in completing follow-up.Qualifications- High school diploma.- Minimum 3-5 years experience with OCTG tubulars.- Minimum 3-5 years’ experience supervisory experience.- Loader Operator experience required- Fork Lift Ticket is recommended - Strong communication skills.- Minimum 5 years experience working with inventory programs.- Demonstrated ability to develop and maintain a strong safety culture.SummaryIf you think you could be exactly who we are looking for, please reach out directly to us today! This position will not be available for long!We thank all applicants for applying. Only those who are qualified will be contacted for an interview.Please note that due to the COVID-19 government regulations in place our offices are temporarily closed.However, please apply via this application link alternatively you can email Moumen.etbail@randstad.ca or kevin.nguyen@randstad.caLooking forward to hearing from you!Warm Regards,Moumen EtbailRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • newbrook, alberta
    • permanent
    • $30.00 - $43.00 per hour
    Our client is in urgent need of an amazing heavy-duty mechanic, if you have been seeking a great company to work for this is your opportunity to get in with a great company and hit the ground running. If you are reliable and a quick learner who likes to evolve with changing demands of the industry then this position is for you.We are actively seeking a heavy-duty mechanic who considers themselves a high-level candidate who enjoys being a valued team player, strives for continuous learning, and is experienced in an agricultural environment. The shop is located in the Newbrook area. The environment is encouraging with a high-performing team. They are looking for someone who has a great positive attitude, willingness to learn, and a strong work ethic. You will be someone with a strong understanding of tool-making principles, able to work with minimal supervision, and with good organization, lastly, you have great attention to detail and take good pride in the work that you do. If this is something you believe would be a good fit for, then read on and apply now!Advantages· Competitive pay based on experience · Day shift· Permanent opportunity· Work outside · Comprehensive Benefits Package· Autonomy within the role· Working with an energetic, positive, and diverse team· Opportunity for someone to be innovative and obtain real growth within a solid teamResponsibilities· Repair and adjust equipment· Replace defective parts· Perform scheduled inspections and maintenance· Complete and submit work orders· Maintain, order parts and provide feedback to operators· Rebuild and change major components· Operate for testing purposes· Transport for travel will be provided· Other duties as assigned· Service farm equipment Qualifications· Journeyman heavy-duty mechanic· Outstanding work ethic with exceptional attendance· Willingness to take initiative and ability to work independently with limited supervision· Strong interpersonal and communication skills· Team playerSummaryIf you think you could be exactly who we are looking for, please reach out directly to us today! This position will not be available for long!We thank all applicants for applying. Only those who are qualified will be contacted for an interview.Please note that due to the COVID-19 government regulations in place our offices are temporarily closed.However, please apply via this application link alternatively you can email Moumen.etbail@randstad.ca Register on our website at Randstad.caLooking forward to hearing from you!Regards,Moumen Etbail Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Our client is in urgent need of an amazing heavy-duty mechanic, if you have been seeking a great company to work for this is your opportunity to get in with a great company and hit the ground running. If you are reliable and a quick learner who likes to evolve with changing demands of the industry then this position is for you.We are actively seeking a heavy-duty mechanic who considers themselves a high-level candidate who enjoys being a valued team player, strives for continuous learning, and is experienced in an agricultural environment. The shop is located in the Newbrook area. The environment is encouraging with a high-performing team. They are looking for someone who has a great positive attitude, willingness to learn, and a strong work ethic. You will be someone with a strong understanding of tool-making principles, able to work with minimal supervision, and with good organization, lastly, you have great attention to detail and take good pride in the work that you do. If this is something you believe would be a good fit for, then read on and apply now!Advantages· Competitive pay based on experience · Day shift· Permanent opportunity· Work outside · Comprehensive Benefits Package· Autonomy within the role· Working with an energetic, positive, and diverse team· Opportunity for someone to be innovative and obtain real growth within a solid teamResponsibilities· Repair and adjust equipment· Replace defective parts· Perform scheduled inspections and maintenance· Complete and submit work orders· Maintain, order parts and provide feedback to operators· Rebuild and change major components· Operate for testing purposes· Transport for travel will be provided· Other duties as assigned· Service farm equipment Qualifications· Journeyman heavy-duty mechanic· Outstanding work ethic with exceptional attendance· Willingness to take initiative and ability to work independently with limited supervision· Strong interpersonal and communication skills· Team playerSummaryIf you think you could be exactly who we are looking for, please reach out directly to us today! This position will not be available for long!We thank all applicants for applying. Only those who are qualified will be contacted for an interview.Please note that due to the COVID-19 government regulations in place our offices are temporarily closed.However, please apply via this application link alternatively you can email Moumen.etbail@randstad.ca Register on our website at Randstad.caLooking forward to hearing from you!Regards,Moumen Etbail Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • calgary, alberta
    • permanent
    It’s time to get back on site! We’re looking for Journeyman Off-Road Heavy-Duty Technicians for an outstanding project in the Kitimat and Terrace BC area. If you’re a certified Off-Road technician looking for a stable large-scale project, this is the job you are looking for. We are accepting applicants throughout Western Canadian centres including Calgary and Edmonton Alberta, as well as Kelowna, Vancouver, Nanaimo, and Prince George BC. Off-Road Heavy-Duty Technicians with a keen understanding of on-site safety protocols and a strong independent spirit will be interviewed for a chance to join the team and play a vital role with top tier organization.Spend your days doing what you are great at, diagnosing, repairing, and maintaining a large variety of off-road construction equipment, using automated diagnostics, and your practiced skills.Travel to and from camp will be go to hubs in Kitimat, Terrace, Vancouver, Nanaimo, Prince George, and Kelowna BC, as well as Calgary and Edmonton AB.Advantages-Full-service camp life including private rooms and bathrooms, games rooms, gym and running track, climbing wall, golf simulator, and multiple dining halls-14 on and 7 off shift rotations-10hr workdays-Multi Western Canadian travel hubs including Kitimat, Terrace, Vancouver, Nanaimo, Prince George, and Kelowna BC, as well as Calgary and Edmonton AB-Paid orientation for new hires-Estimated start date: Late December to JanuaryResponsibilitiesPreferred Diagnostic, Repair, and Maintenance Experience:-On highway tractor-trailers-Large variety of off-road construction equipment-Other light vehicles-Comfortable with small diesel equipment i.e., pumps, generators, and light towers-Proficient with tooling and service truckQualificationsRequirements:-Journeyman Off-Road Technician CertificationExperience with off-road equipment including Volvo, Hitachi, Komatsu, John Deere, and Caterpillar-You will be required to be comfortable with Diesel Diagnostic Software tools-Successful completion of site required health and safety tests and orientationsSummaryWe are starting to speak with qualified applicants right now, so please get in touch with me at andrew.hall@randstad.ca or feel free to call or text at (403) 542-2475.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    It’s time to get back on site! We’re looking for Journeyman Off-Road Heavy-Duty Technicians for an outstanding project in the Kitimat and Terrace BC area. If you’re a certified Off-Road technician looking for a stable large-scale project, this is the job you are looking for. We are accepting applicants throughout Western Canadian centres including Calgary and Edmonton Alberta, as well as Kelowna, Vancouver, Nanaimo, and Prince George BC. Off-Road Heavy-Duty Technicians with a keen understanding of on-site safety protocols and a strong independent spirit will be interviewed for a chance to join the team and play a vital role with top tier organization.Spend your days doing what you are great at, diagnosing, repairing, and maintaining a large variety of off-road construction equipment, using automated diagnostics, and your practiced skills.Travel to and from camp will be go to hubs in Kitimat, Terrace, Vancouver, Nanaimo, Prince George, and Kelowna BC, as well as Calgary and Edmonton AB.Advantages-Full-service camp life including private rooms and bathrooms, games rooms, gym and running track, climbing wall, golf simulator, and multiple dining halls-14 on and 7 off shift rotations-10hr workdays-Multi Western Canadian travel hubs including Kitimat, Terrace, Vancouver, Nanaimo, Prince George, and Kelowna BC, as well as Calgary and Edmonton AB-Paid orientation for new hires-Estimated start date: Late December to JanuaryResponsibilitiesPreferred Diagnostic, Repair, and Maintenance Experience:-On highway tractor-trailers-Large variety of off-road construction equipment-Other light vehicles-Comfortable with small diesel equipment i.e., pumps, generators, and light towers-Proficient with tooling and service truckQualificationsRequirements:-Journeyman Off-Road Technician CertificationExperience with off-road equipment including Volvo, Hitachi, Komatsu, John Deere, and Caterpillar-You will be required to be comfortable with Diesel Diagnostic Software tools-Successful completion of site required health and safety tests and orientationsSummaryWe are starting to speak with qualified applicants right now, so please get in touch with me at andrew.hall@randstad.ca or feel free to call or text at (403) 542-2475.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • edmonton, alberta
    • permanent
    It’s time to get back on site! We’re looking for Journeyman Off-Road Heavy-Duty Technicians for an outstanding project in the Kitimat and Terrace BC area. If you’re a certified Off-Road technician looking for a stable large-scale project, this is the job you are looking for. We are accepting applicants throughout Western Canadian centres including Calgary and Edmonton Alberta, as well as Kelowna, Vancouver, Nanaimo, and Prince George BC. Off-Road Heavy-Duty Technicians with a keen understanding of on-site safety protocols and a strong independent spirit will be interviewed for a chance to join the team and play a vital role with top tier organization.Spend your days doing what you are great at, diagnosing, repairing, and maintaining a large variety of off-road construction equipment, using automated diagnostics, and your practiced skills.Travel to and from camp will be go to hubs in Kitimat, Terrace, Vancouver, Nanaimo, Prince George, and Kelowna BC, as well as Calgary and Edmonton AB.Advantages-Full-service camp life including private rooms and bathrooms, games rooms, gym and running track, climbing wall, golf simulator, and multiple dining halls-14 on and 7 off shift rotations-10hr workdays-Multi Western Canadian travel hubs including Kitimat, Terrace, Vancouver, Nanaimo, Prince George, and Kelowna BC, as well as Calgary and Edmonton AB-Paid orientation for new hires-Estimated start date: Late December to JanuaryResponsibilitiesPreferred Diagnostic, Repair, and Maintenance Experience:-On highway tractor-trailers-Large variety of off-road construction equipment-Other light vehicles-Comfortable with small diesel equipment i.e., pumps, generators, and light towers-Proficient with tooling and service truckQualificationsRequirements:-Journeyman Off-Road Technician CertificationExperience with off-road equipment including Volvo, Hitachi, Komatsu, John Deere, and Caterpillar-You will be required to be comfortable with Diesel Diagnostic Software tools-Successful completion of site required health and safety tests and orientationsSummaryWe are starting to speak with qualified applicants right now, so please get in touch with me at andrew.hall@randstad.ca or feel free to call or text at (403) 542-2475.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    It’s time to get back on site! We’re looking for Journeyman Off-Road Heavy-Duty Technicians for an outstanding project in the Kitimat and Terrace BC area. If you’re a certified Off-Road technician looking for a stable large-scale project, this is the job you are looking for. We are accepting applicants throughout Western Canadian centres including Calgary and Edmonton Alberta, as well as Kelowna, Vancouver, Nanaimo, and Prince George BC. Off-Road Heavy-Duty Technicians with a keen understanding of on-site safety protocols and a strong independent spirit will be interviewed for a chance to join the team and play a vital role with top tier organization.Spend your days doing what you are great at, diagnosing, repairing, and maintaining a large variety of off-road construction equipment, using automated diagnostics, and your practiced skills.Travel to and from camp will be go to hubs in Kitimat, Terrace, Vancouver, Nanaimo, Prince George, and Kelowna BC, as well as Calgary and Edmonton AB.Advantages-Full-service camp life including private rooms and bathrooms, games rooms, gym and running track, climbing wall, golf simulator, and multiple dining halls-14 on and 7 off shift rotations-10hr workdays-Multi Western Canadian travel hubs including Kitimat, Terrace, Vancouver, Nanaimo, Prince George, and Kelowna BC, as well as Calgary and Edmonton AB-Paid orientation for new hires-Estimated start date: Late December to JanuaryResponsibilitiesPreferred Diagnostic, Repair, and Maintenance Experience:-On highway tractor-trailers-Large variety of off-road construction equipment-Other light vehicles-Comfortable with small diesel equipment i.e., pumps, generators, and light towers-Proficient with tooling and service truckQualificationsRequirements:-Journeyman Off-Road Technician CertificationExperience with off-road equipment including Volvo, Hitachi, Komatsu, John Deere, and Caterpillar-You will be required to be comfortable with Diesel Diagnostic Software tools-Successful completion of site required health and safety tests and orientationsSummaryWe are starting to speak with qualified applicants right now, so please get in touch with me at andrew.hall@randstad.ca or feel free to call or text at (403) 542-2475.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • nisku, alberta
    • permanent
    • $26 - $34 per year
    Our client in Nisku is in urgent need of an amazing CNC Machinist, if have been seeking a great company to work for this is your opportunity to get in with a great company and hit the ground running. If you are reliable and a quick learner who likes to evolve with changing demands of the industry then this position is for you. We are actively seeking a CNC machinist who considers themselves a high-level candidate who enjoys being a valued team player, strives for continuous learning, and is experienced in a manufacturing shop. The shop is located south of Edmonton in the Nisku area. The environment is laid back and encouraging with a high-performing team. They are looking for someone who has a great positive attitude, willingness to learn, and a strong work ethic. You will be someone with a strong understanding of tool-making principles, able to work with minimal supervision, and with good organization, lastly, you have great attention to detail and take good pride in the work that you do. If this is something you believe would be a good fit for, then read on and apply now! Shifts: Both day and night shifts are available. **Please note that preference will be given to those who are able to start with 2 weeks' notice.** AdvantagesPermanent opportunityGain meaningful experienceComprehensive Benefits PackageCompetitive wage based on experience $26-$36 ( $ 2.25-night shift premium and a $5.00 premium for operating 2 machines simultaneously)Employee BenefitsAutonomy within the roleWorking with an energetic, positive, and diverse teamOpportunity for someone to be innovative and obtain real growth within a solid teamDay and night shifts available Responsibilities3-5 years strong CNC machining background and willing to learnWork with Weingarten rotor milling machineHandling long cranes and long bars up to 300 inches long.Handling measuring toolsNo programming involved, just load and unload parts and perform machining Setup of machines through the use of proper toolsOperate machine with proper guarding in placeKeep the machine and tools in a good working order Inspects work visually and with appropriate measuring instrumentsEnsures documentation and records are accurately maintainedParticipates in continual improvement through innovation and initiatives to improve safety, productivity, profitability, and efficiencyFollows all policies and procedures as detailed in-process documents, immediately brings to the attention of the Supervisor any discrepancies or opportunities for improvementMaintains a clean and organized work area at all timesQualifications3-5 Years experience with CNC & mill,Must be able to complete a physical strength test and pre-employment testing prior to being on-siteMust have a reliable vehicle Ability to competently perform on the CNC equipment Ability to measure in both Imperial and Metric systems of measurementHave a thorough knowledge of machining methods, techniques, and related equipmentKnowledge of fits and tolerancesMust be able to read and interpret drawings and specificationsMust be able to manage multiple tasks and priorities and easily adapt to changing situations.Must have high attention to detail.Ability to safely operate a tow motor and crane with required training and licenseBasic knowledge of OSHA/OHSA regulations and safety standardsSummaryIf you think you could be exactly who we are looking for, please reach out directly to us today! This position will not be available for long!We thank all applicants for applying. Only those who are qualified will be contacted for an interview.Please note that due to the COVID-19 government regulations in place our offices are temporarily closed.However, please apply via this application link alternatively you can email Moumen.etbail@randstad.ca or julia.novitchkova@randstad.caRegister on our website at Randstad.caLooking forward to hearing from you!Regards,Moumen Etbail and Julia NotvitchkovaRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Our client in Nisku is in urgent need of an amazing CNC Machinist, if have been seeking a great company to work for this is your opportunity to get in with a great company and hit the ground running. If you are reliable and a quick learner who likes to evolve with changing demands of the industry then this position is for you. We are actively seeking a CNC machinist who considers themselves a high-level candidate who enjoys being a valued team player, strives for continuous learning, and is experienced in a manufacturing shop. The shop is located south of Edmonton in the Nisku area. The environment is laid back and encouraging with a high-performing team. They are looking for someone who has a great positive attitude, willingness to learn, and a strong work ethic. You will be someone with a strong understanding of tool-making principles, able to work with minimal supervision, and with good organization, lastly, you have great attention to detail and take good pride in the work that you do. If this is something you believe would be a good fit for, then read on and apply now! Shifts: Both day and night shifts are available. **Please note that preference will be given to those who are able to start with 2 weeks' notice.** AdvantagesPermanent opportunityGain meaningful experienceComprehensive Benefits PackageCompetitive wage based on experience $26-$36 ( $ 2.25-night shift premium and a $5.00 premium for operating 2 machines simultaneously)Employee BenefitsAutonomy within the roleWorking with an energetic, positive, and diverse teamOpportunity for someone to be innovative and obtain real growth within a solid teamDay and night shifts available Responsibilities3-5 years strong CNC machining background and willing to learnWork with Weingarten rotor milling machineHandling long cranes and long bars up to 300 inches long.Handling measuring toolsNo programming involved, just load and unload parts and perform machining Setup of machines through the use of proper toolsOperate machine with proper guarding in placeKeep the machine and tools in a good working order Inspects work visually and with appropriate measuring instrumentsEnsures documentation and records are accurately maintainedParticipates in continual improvement through innovation and initiatives to improve safety, productivity, profitability, and efficiencyFollows all policies and procedures as detailed in-process documents, immediately brings to the attention of the Supervisor any discrepancies or opportunities for improvementMaintains a clean and organized work area at all timesQualifications3-5 Years experience with CNC & mill,Must be able to complete a physical strength test and pre-employment testing prior to being on-siteMust have a reliable vehicle Ability to competently perform on the CNC equipment Ability to measure in both Imperial and Metric systems of measurementHave a thorough knowledge of machining methods, techniques, and related equipmentKnowledge of fits and tolerancesMust be able to read and interpret drawings and specificationsMust be able to manage multiple tasks and priorities and easily adapt to changing situations.Must have high attention to detail.Ability to safely operate a tow motor and crane with required training and licenseBasic knowledge of OSHA/OHSA regulations and safety standardsSummaryIf you think you could be exactly who we are looking for, please reach out directly to us today! This position will not be available for long!We thank all applicants for applying. Only those who are qualified will be contacted for an interview.Please note that due to the COVID-19 government regulations in place our offices are temporarily closed.However, please apply via this application link alternatively you can email Moumen.etbail@randstad.ca or julia.novitchkova@randstad.caRegister on our website at Randstad.caLooking forward to hearing from you!Regards,Moumen Etbail and Julia NotvitchkovaRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • edmonton, alberta
    • permanent
    • $65,000 - $70,000 per year
    Are you driven for continuous development from a workplace? Are you a hands-on leader who enjoys building relationships with your team and leading by example? If this all applies to you then read on! We are excited to announce that we are looking for a Production Supervisor to join a rapidly growing company that is now a world-leading big name brand. We are seeking an energetic and effective production supervisor in Edmonton, AB, who will be front and center helping their team meet the daily production needs, ensuring on-time and accurate delivery of customer orders. You won’t just need hands-on delivery experience you will also have to be very well centred in the use of MS office skills which will also be paramount to being successful in this position The right candidate for this Edmonton-based production supervisor will be someone who will value each member of the production team, taking the time to engage, coach, motivate as well as set out guidelines for career development within the company.There is a salary range for this production supervisor role of $65,000 to $70,000 based on experience but with exceptional benefits, perks and employee investment plans through training and advancement. Advantages- 65k - 70k salary (dep. on experience)- Gain meaningful leadership experience- Comprehensive Benefits Package- Employee Benefits on product purchases- Autonomy within the role- Working with an energetic, positive, and diverse team- Opportunity for someone to be innovative in their management style.- Yearly bonus ( based on achieving KPIs) Responsibilities- Deliver results for production lines on assigned shift(s) in accordance with approved production plans/schedules to meet business objectives.- Monitor production environment (i.e. equipment, quality, cost, efficiencies, yield, etc.) - Contribute to reviews and analysis of the production performance indicators/requirements to maximize the value and quality of production outputs.- Appropriate resource allocation- Providing effective leadership and direction to hourly employees (coaching, cross-training, addressing and resolution of HR-related issues and concerns) - Monitor production environment (i.e. equipment, quality, cost, efficiencies, yield, etc.) through establishing a feedback mechanism to ensure proactive resolution of production issues and consistent quality of work and product.Qualifications- Minimum of 3-5 years of food Production experience in a warehouse or manufacturing environment- Post-Secondary degree or diploma with emphasis on food processing and business management- Strong knowledge of GMP (Good Manufacturing Practices), HACCP (Hazard Analysis Critical Control Point), WHMIS (Workplace Hazardous Materials Information System) and Lean manufacturing concepts- Ability to work cross-functionally- Strong communication and analytical skills - Knowledge of MS Office Applications (Word, Excel, PowerPoint, Outlook)SummaryIf you think you could be exactly who we are looking for, please reach out directly to us today! This position will not be available for long!Please note that due to the COVID-19 government regulations in place our offices are temporarily closed.However, please apply via this application link alternatively you can email Moumen.Etbail@randstad.caRegister on our website at Randstad.caLooking forward to hearing from you! Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Are you driven for continuous development from a workplace? Are you a hands-on leader who enjoys building relationships with your team and leading by example? If this all applies to you then read on! We are excited to announce that we are looking for a Production Supervisor to join a rapidly growing company that is now a world-leading big name brand. We are seeking an energetic and effective production supervisor in Edmonton, AB, who will be front and center helping their team meet the daily production needs, ensuring on-time and accurate delivery of customer orders. You won’t just need hands-on delivery experience you will also have to be very well centred in the use of MS office skills which will also be paramount to being successful in this position The right candidate for this Edmonton-based production supervisor will be someone who will value each member of the production team, taking the time to engage, coach, motivate as well as set out guidelines for career development within the company.There is a salary range for this production supervisor role of $65,000 to $70,000 based on experience but with exceptional benefits, perks and employee investment plans through training and advancement. Advantages- 65k - 70k salary (dep. on experience)- Gain meaningful leadership experience- Comprehensive Benefits Package- Employee Benefits on product purchases- Autonomy within the role- Working with an energetic, positive, and diverse team- Opportunity for someone to be innovative in their management style.- Yearly bonus ( based on achieving KPIs) Responsibilities- Deliver results for production lines on assigned shift(s) in accordance with approved production plans/schedules to meet business objectives.- Monitor production environment (i.e. equipment, quality, cost, efficiencies, yield, etc.) - Contribute to reviews and analysis of the production performance indicators/requirements to maximize the value and quality of production outputs.- Appropriate resource allocation- Providing effective leadership and direction to hourly employees (coaching, cross-training, addressing and resolution of HR-related issues and concerns) - Monitor production environment (i.e. equipment, quality, cost, efficiencies, yield, etc.) through establishing a feedback mechanism to ensure proactive resolution of production issues and consistent quality of work and product.Qualifications- Minimum of 3-5 years of food Production experience in a warehouse or manufacturing environment- Post-Secondary degree or diploma with emphasis on food processing and business management- Strong knowledge of GMP (Good Manufacturing Practices), HACCP (Hazard Analysis Critical Control Point), WHMIS (Workplace Hazardous Materials Information System) and Lean manufacturing concepts- Ability to work cross-functionally- Strong communication and analytical skills - Knowledge of MS Office Applications (Word, Excel, PowerPoint, Outlook)SummaryIf you think you could be exactly who we are looking for, please reach out directly to us today! This position will not be available for long!Please note that due to the COVID-19 government regulations in place our offices are temporarily closed.However, please apply via this application link alternatively you can email Moumen.Etbail@randstad.caRegister on our website at Randstad.caLooking forward to hearing from you! Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • nisku, alberta
    • permanent
    Are you a dedicated Millwright from a manufacturing background? Are you looking for a new challenge? Do you also have a great history in troubleshooting CNC machining? Do you thrive working in close-knit teams? If so then this position could be just right for you, our client in Nisku is looking for a well-rounded candidate to fill their Millwright position. The person must have great attention to detail, a great aptitude for a fantastic aptitude for preventative maintenance, and a great and positive attitude when on site.In this role, you will be reporting to the Plant Manager, and be responsible for performing a variety of tasks at different sites to ensure equipment and building repairs are completed in a timely manner while adhering to quality, safety, food safety, and legislative standards and guidelines.Advantages- Permanent opportunity- Day shift- Gain meaningful experience- Comprehensive Benefits Package- Competitive Pay starts at $34 per HR- Employee Benefits- Autonomy within the role- Working with an energetic, positive, and diverse team- Opportunity for someone to be innovative and obtain real growth within a solid teamResponsibilities- Read blueprints, diagrams, and schematic drawings to determine work procedures.- Responsible for all repairs and maintenance of machinery- Installation and testing of mechanical components.- Material Preparation- Grinding, drilling, cutting, clamping, assembling, and preparing components.- Perform precise measuring .to ensure components are machined to the specific tolerances and surface finishes.- Set up and operate CNC machines to maximize the use of materials and equipment.- Okuma / Mazak- Mill-turns, live tooling, 3 axis lathes, 5 axis mills.- Perform preventative maintenance on equipmentQualifications- 1-2 Years of experience with troubleshooting and repairing CNC- Minimum 2 years experience in a manufacturing environment- Ability to read and interpret basic drawings, comprehend written instructions and technical documentation- Mechanical aptitude and awareness - hand tools, basic hydraulics, safe operation of machines- Must be able to pass pre-employment testing- Hold a valid drivers license and have a reliable vehicleSummaryIf you are looking for a rewarding career as a Millwright with an established company in Nisku, Alberta, then we would love to see an updated copy of your resume.You can send a copy directly for consideration to Moumen.etbail@randstad.caNot the right position for you?We thank all applicants for expressing interest in the above opportunity; however, only those candidates who meet the above requirements will be contacted for an interview.Our skilled trades team is always looking for talented tradespeople for work in the Alberta region, feel free to send your resume to Moumen.etbail@randstad.ca to be considered for other opportunities.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Are you a dedicated Millwright from a manufacturing background? Are you looking for a new challenge? Do you also have a great history in troubleshooting CNC machining? Do you thrive working in close-knit teams? If so then this position could be just right for you, our client in Nisku is looking for a well-rounded candidate to fill their Millwright position. The person must have great attention to detail, a great aptitude for a fantastic aptitude for preventative maintenance, and a great and positive attitude when on site.In this role, you will be reporting to the Plant Manager, and be responsible for performing a variety of tasks at different sites to ensure equipment and building repairs are completed in a timely manner while adhering to quality, safety, food safety, and legislative standards and guidelines.Advantages- Permanent opportunity- Day shift- Gain meaningful experience- Comprehensive Benefits Package- Competitive Pay starts at $34 per HR- Employee Benefits- Autonomy within the role- Working with an energetic, positive, and diverse team- Opportunity for someone to be innovative and obtain real growth within a solid teamResponsibilities- Read blueprints, diagrams, and schematic drawings to determine work procedures.- Responsible for all repairs and maintenance of machinery- Installation and testing of mechanical components.- Material Preparation- Grinding, drilling, cutting, clamping, assembling, and preparing components.- Perform precise measuring .to ensure components are machined to the specific tolerances and surface finishes.- Set up and operate CNC machines to maximize the use of materials and equipment.- Okuma / Mazak- Mill-turns, live tooling, 3 axis lathes, 5 axis mills.- Perform preventative maintenance on equipmentQualifications- 1-2 Years of experience with troubleshooting and repairing CNC- Minimum 2 years experience in a manufacturing environment- Ability to read and interpret basic drawings, comprehend written instructions and technical documentation- Mechanical aptitude and awareness - hand tools, basic hydraulics, safe operation of machines- Must be able to pass pre-employment testing- Hold a valid drivers license and have a reliable vehicleSummaryIf you are looking for a rewarding career as a Millwright with an established company in Nisku, Alberta, then we would love to see an updated copy of your resume.You can send a copy directly for consideration to Moumen.etbail@randstad.caNot the right position for you?We thank all applicants for expressing interest in the above opportunity; however, only those candidates who meet the above requirements will be contacted for an interview.Our skilled trades team is always looking for talented tradespeople for work in the Alberta region, feel free to send your resume to Moumen.etbail@randstad.ca to be considered for other opportunities.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • edmonton, alberta
    • permanent
    • $41.60 per hour
    Are you a dedicated Journeyman Millwright or 4th-year millwright apprentice with a great varied background? Are you looking for a new challenge? Our client, a Production company in Edmonton, is looking for a star candidate to fill their Millwright position. The person must have great attention to detail, a fantastic aptitude for preventative maintenance, and a great and positive attitude when on site. In this role, you will be reporting to the Maintenance Supervisor, and be responsible for performing a variety of tasks to ensure equipment and building repairs are completed in a timely manner while adhering to quality, safety, food safety, and legislative standards and guidelines.Advantages- Permanent opportunity- Day and afternoon shifts are available- 8 hours shifts with available overtime- Gain meaningful experience- Comprehensive Benefits Package- Employee Benefits- Autonomy within the role- Working with an energetic, positive, and diverse team- Opportunity for someone to be innovative and obtain real growth within a solid teamResponsibilities- Accountable for the effective functioning of mechanical, hydraulic, and pneumatic equipment and systems in thefacility.- Troubleshoot equipment problems and perform repairs.- Complete work orders and preventative maintenance, as required.- Install, weld, or fabricate parts as required to complete repairs, preventative maintenance, or work orders.- Identify and initiate parts requests to ensure completion of repairs, preventative maintenance, or work orders.- Assist MP2 Coordinator to ensure accurate and sufficient parts inventory.- Assist with production line changes, setups, and dismantles as required.- Assist production with deep cleans.- Accountable for the effective installation of new equipment or the installation, welding, and fabrication of newequipment.- Responsible to repair non-trade issues and general plant maintenance tasks including but not limited to, caulking,changing lights, painting, etc.- Accountable for ensuring a clean and organized work area (toolboxes, shop area, parts area). Ensures all tools arein good working order. - Review and/or complete documentation/records to ensure accuracy and completion for Quality Assurance and regulatory bodies as required.- Responsible for monitoring and reporting potential food safety issues.- Accountable to adhere to and utilize Company policies and procedures, and HACCP regulations.Qualifications- Red seal journeyman millwright certification or recognized interprovincial equivalent is an asset- 5 th Class Power Engineer certification is an asset- Minimum two years experience performing repairs in a manufacturing environment- Experience with mechanical systems, welding, fabrication, machining, and power/manual tools are required- Attention to detail in a fast-paced environment- Experience in food production is preferredSummaryIf you are looking for a rewarding career as a Maintenance Millwright with an established manufacturer in Edmonton Alberta, then we would love to see an updated copy of your resume.You can send a copy directly for consideration to moumen.etbail@randstad.caWe thank all applicants for expressing interest in the above opportunity; however, only those candidates who meet the above requirements will be contacted for an interview.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Are you a dedicated Journeyman Millwright or 4th-year millwright apprentice with a great varied background? Are you looking for a new challenge? Our client, a Production company in Edmonton, is looking for a star candidate to fill their Millwright position. The person must have great attention to detail, a fantastic aptitude for preventative maintenance, and a great and positive attitude when on site. In this role, you will be reporting to the Maintenance Supervisor, and be responsible for performing a variety of tasks to ensure equipment and building repairs are completed in a timely manner while adhering to quality, safety, food safety, and legislative standards and guidelines.Advantages- Permanent opportunity- Day and afternoon shifts are available- 8 hours shifts with available overtime- Gain meaningful experience- Comprehensive Benefits Package- Employee Benefits- Autonomy within the role- Working with an energetic, positive, and diverse team- Opportunity for someone to be innovative and obtain real growth within a solid teamResponsibilities- Accountable for the effective functioning of mechanical, hydraulic, and pneumatic equipment and systems in thefacility.- Troubleshoot equipment problems and perform repairs.- Complete work orders and preventative maintenance, as required.- Install, weld, or fabricate parts as required to complete repairs, preventative maintenance, or work orders.- Identify and initiate parts requests to ensure completion of repairs, preventative maintenance, or work orders.- Assist MP2 Coordinator to ensure accurate and sufficient parts inventory.- Assist with production line changes, setups, and dismantles as required.- Assist production with deep cleans.- Accountable for the effective installation of new equipment or the installation, welding, and fabrication of newequipment.- Responsible to repair non-trade issues and general plant maintenance tasks including but not limited to, caulking,changing lights, painting, etc.- Accountable for ensuring a clean and organized work area (toolboxes, shop area, parts area). Ensures all tools arein good working order. - Review and/or complete documentation/records to ensure accuracy and completion for Quality Assurance and regulatory bodies as required.- Responsible for monitoring and reporting potential food safety issues.- Accountable to adhere to and utilize Company policies and procedures, and HACCP regulations.Qualifications- Red seal journeyman millwright certification or recognized interprovincial equivalent is an asset- 5 th Class Power Engineer certification is an asset- Minimum two years experience performing repairs in a manufacturing environment- Experience with mechanical systems, welding, fabrication, machining, and power/manual tools are required- Attention to detail in a fast-paced environment- Experience in food production is preferredSummaryIf you are looking for a rewarding career as a Maintenance Millwright with an established manufacturer in Edmonton Alberta, then we would love to see an updated copy of your resume.You can send a copy directly for consideration to moumen.etbail@randstad.caWe thank all applicants for expressing interest in the above opportunity; however, only those candidates who meet the above requirements will be contacted for an interview.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • ft. mcmurray , alberta
    • permanent
    • $40.00 - $45.00 per hour
    This is your chance to show your skills! Let your experience and shining personality secure a fantastic career.The Field Services team is currently seeking a compressor technician living in the Fort McMurray, AB area, The role is a great opportunity with a company that puts there employees first. An environment of learning and develop that supports and fosters independence. We are seeking a Journeyperson Millwright or Electrician with direct screw compressor experience.We are seeking that perfect combo of charm and knowledge since this compressor service technician will be required to move from diagnosing to client customer service. Most of the work will be completed alone but you will be supported by a dedicated area manager and a dispatcher.Comprehensive training for this role is provided in Edmonton at the beginning of this role.*** preemployment testing is required for this role.Advantages100% benefit coverage by the companyPension!3 weeks vacation Company vehicle provided Tons of room for growth and learning within the company$40-45/hrOT after 40/week7:30am startResponsibilitiesOne week a month tickets in the south part of the district. Some on-call or evening work may be requiredQualificationsRed Seal trades ticket preferredValid drivers licenseBe comfortable lifting up to 75lbsComputer skillsKnowledge of screw compressorsSummaryIf you believe you are an excellent fit for this role we encourage you to apply by sending a resume and your certificate to Gitika.Arya@randstad.ca or Sarah.Patterson@randstad.ca.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    This is your chance to show your skills! Let your experience and shining personality secure a fantastic career.The Field Services team is currently seeking a compressor technician living in the Fort McMurray, AB area, The role is a great opportunity with a company that puts there employees first. An environment of learning and develop that supports and fosters independence. We are seeking a Journeyperson Millwright or Electrician with direct screw compressor experience.We are seeking that perfect combo of charm and knowledge since this compressor service technician will be required to move from diagnosing to client customer service. Most of the work will be completed alone but you will be supported by a dedicated area manager and a dispatcher.Comprehensive training for this role is provided in Edmonton at the beginning of this role.*** preemployment testing is required for this role.Advantages100% benefit coverage by the companyPension!3 weeks vacation Company vehicle provided Tons of room for growth and learning within the company$40-45/hrOT after 40/week7:30am startResponsibilitiesOne week a month tickets in the south part of the district. Some on-call or evening work may be requiredQualificationsRed Seal trades ticket preferredValid drivers licenseBe comfortable lifting up to 75lbsComputer skillsKnowledge of screw compressorsSummaryIf you believe you are an excellent fit for this role we encourage you to apply by sending a resume and your certificate to Gitika.Arya@randstad.ca or Sarah.Patterson@randstad.ca.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • calgary, alberta
    • permanent
    THe Field Services team is currently looking for a pipeline field technician living in Calgary, AB. The role is a great opportunity with a company that puts there employees first. An environment for great learning that provide the opportunities for career advancement. We are seeking someone who has ability to interact with staff in a fast-paced environment, which remaining flexible, efficient, proactive and resourceful, with a high level of professionalism is cruicial to this role.Advantages- Competitive compensation package- Comprehensive benefit plan, and health and wellness program- RRSP matching- Flexible working hours- Opportunity for career advancementResponsibilities- Working with Project Manger about project specifications- Receiving inspection survey assignments and ensuring understanding of requirements- Facilitating pre-job safety meetings- Performing site visits- Launching and receiving insepection tools- Assessing tool consition and permornignmaintence whenever neededQualifications- 1 to 3 years of field work experience- Mechanical aptitude- Ability to travel more than 80%- Rotation - 15 days on / 6 days off- Class 5 license and clean driver's abstractSummaryIf you believe you are an excellent fit for this role we encourage you to apply by sending a resume to gitika.arya@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    THe Field Services team is currently looking for a pipeline field technician living in Calgary, AB. The role is a great opportunity with a company that puts there employees first. An environment for great learning that provide the opportunities for career advancement. We are seeking someone who has ability to interact with staff in a fast-paced environment, which remaining flexible, efficient, proactive and resourceful, with a high level of professionalism is cruicial to this role.Advantages- Competitive compensation package- Comprehensive benefit plan, and health and wellness program- RRSP matching- Flexible working hours- Opportunity for career advancementResponsibilities- Working with Project Manger about project specifications- Receiving inspection survey assignments and ensuring understanding of requirements- Facilitating pre-job safety meetings- Performing site visits- Launching and receiving insepection tools- Assessing tool consition and permornignmaintence whenever neededQualifications- 1 to 3 years of field work experience- Mechanical aptitude- Ability to travel more than 80%- Rotation - 15 days on / 6 days off- Class 5 license and clean driver's abstractSummaryIf you believe you are an excellent fit for this role we encourage you to apply by sending a resume to gitika.arya@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • calgary, alberta
    • permanent
    • $40 - $45 per year
    This is your chance to show your skills! Let your experience and shining personality secure a fantastic career.The Field Services team is currently seeking a compressor technician living in the Calgary, AB area, The role is a great opportunity with a company that puts there employees first. An environment of learning and develop that supports and fosters independence. We are seeking a Journeyperson Millwright or Electrician with direct screw compressor experience.We are seeking that perfect combo of charm and knowledge since this compressor service technician will be required to move from diagnosing to client customer service. Most of the work will be completed alone but you will be supported by a dedicated area manager and a dispatcher.Comprehensive training for this role is provided in Edmonton at the beginning of this role.*** preemployment testing is required for this role.Advantages100% benefit coverage by the companyPension!3 weeks vacation Company vehicle provided Tons of room for growth and learning within the company$40-45/hrOT after 40/week7:30am startResponsibilitiesTravel radius is from Red Deer to the American border. One week a month tickets in the south part of the district. Some on-call or evening work may be requiredQualificationsRed Seal trades ticket preferredValid drivers licenseBe comfortable lifting up to 75lbsComputer skillsKnowledge of screw compressorsSummaryIf you believe you are an excellent fit for this role we encourage you to apply by sending a resume and your certificate to Sarah.Patterson@randstad.ca.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    This is your chance to show your skills! Let your experience and shining personality secure a fantastic career.The Field Services team is currently seeking a compressor technician living in the Calgary, AB area, The role is a great opportunity with a company that puts there employees first. An environment of learning and develop that supports and fosters independence. We are seeking a Journeyperson Millwright or Electrician with direct screw compressor experience.We are seeking that perfect combo of charm and knowledge since this compressor service technician will be required to move from diagnosing to client customer service. Most of the work will be completed alone but you will be supported by a dedicated area manager and a dispatcher.Comprehensive training for this role is provided in Edmonton at the beginning of this role.*** preemployment testing is required for this role.Advantages100% benefit coverage by the companyPension!3 weeks vacation Company vehicle provided Tons of room for growth and learning within the company$40-45/hrOT after 40/week7:30am startResponsibilitiesTravel radius is from Red Deer to the American border. One week a month tickets in the south part of the district. Some on-call or evening work may be requiredQualificationsRed Seal trades ticket preferredValid drivers licenseBe comfortable lifting up to 75lbsComputer skillsKnowledge of screw compressorsSummaryIf you believe you are an excellent fit for this role we encourage you to apply by sending a resume and your certificate to Sarah.Patterson@randstad.ca.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • edmonton, alberta
    • permanent
    • $40 - $45 per year
    The Field Services team is currently seeking a compressor technician living in the Edmonton, AB area, The role is a great opportunity with a company that puts there employees first. An environment of learning and develop that supports and fosters independence. We are seeking a Journeyperson Millwright or Electrician with direct screw compressor experience.We are seeking that perfect combo of charm and knowledge since this compressor service technician will be required to move from diagnosing to client customer service. Most of the work will be completed alone but you will be supported by a dedicated area manager and a dispatcher.Comprehensive training for this role is provided in Edmonton at the beginning of this role.*** preemployment testing is required for this role.Advantages100% benefit coverage by the companyPension!3 weeks vacation Company vehicle provided Tons of room for growth and learning within the company$40-45/hrOT after 40/week7:30am startResponsibilitiesTravel radius is from Red Deer to the American border. One week a month tickets in the south part of the district. Some on-call or evening work may be requiredQualificationsRed Seal trades ticket preferredValid drivers licenseBe comfortable lifting up to 75lbsComputer skillsKnowledge of screw compressorsSummaryIf you believe you are an excellent fit for this role we encourage you to apply by sending a resume and your certificate to Sarah.Patterson@randstad.ca.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    The Field Services team is currently seeking a compressor technician living in the Edmonton, AB area, The role is a great opportunity with a company that puts there employees first. An environment of learning and develop that supports and fosters independence. We are seeking a Journeyperson Millwright or Electrician with direct screw compressor experience.We are seeking that perfect combo of charm and knowledge since this compressor service technician will be required to move from diagnosing to client customer service. Most of the work will be completed alone but you will be supported by a dedicated area manager and a dispatcher.Comprehensive training for this role is provided in Edmonton at the beginning of this role.*** preemployment testing is required for this role.Advantages100% benefit coverage by the companyPension!3 weeks vacation Company vehicle provided Tons of room for growth and learning within the company$40-45/hrOT after 40/week7:30am startResponsibilitiesTravel radius is from Red Deer to the American border. One week a month tickets in the south part of the district. Some on-call or evening work may be requiredQualificationsRed Seal trades ticket preferredValid drivers licenseBe comfortable lifting up to 75lbsComputer skillsKnowledge of screw compressorsSummaryIf you believe you are an excellent fit for this role we encourage you to apply by sending a resume and your certificate to Sarah.Patterson@randstad.ca.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • edmonton, alberta
    • permanent
    • $80,000 - $100,000 per year
    Are you a Red Seal Machinist looking for a next step in your career? Do you enjoy facing clients and making relationships? Do you have a really good knowledge in milling, line boring, pipe flanges and spools,. If yes, we would love to hear from you.We are looking for a field mechanic for a PERMANENT position in Edmonton, Alberta. So, are you ready for the next chapter of your career?Advantages- permanent role- Friendly and team oriented atmosphere- Great benefits after probationary period- on-site parking- flexible scheduleResponsibilities- Operate manual lathe, mill and grinding machines- Change and set cutting tools- Adjust feeds and speeds for efficiency- Read, study and interpret blueprints, specifications, manuals, drawingsQualifications- Atleast 5 years of relevant experience- red seal certification required- Class 5 license and willingness to travel is requiredSummaryIf you believe that you are the right fit, please email you resume to Gitika at gitika.arya@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Are you a Red Seal Machinist looking for a next step in your career? Do you enjoy facing clients and making relationships? Do you have a really good knowledge in milling, line boring, pipe flanges and spools,. If yes, we would love to hear from you.We are looking for a field mechanic for a PERMANENT position in Edmonton, Alberta. So, are you ready for the next chapter of your career?Advantages- permanent role- Friendly and team oriented atmosphere- Great benefits after probationary period- on-site parking- flexible scheduleResponsibilities- Operate manual lathe, mill and grinding machines- Change and set cutting tools- Adjust feeds and speeds for efficiency- Read, study and interpret blueprints, specifications, manuals, drawingsQualifications- Atleast 5 years of relevant experience- red seal certification required- Class 5 license and willingness to travel is requiredSummaryIf you believe that you are the right fit, please email you resume to Gitika at gitika.arya@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • nisku, alberta
    • permanent
    • $28.00 - $36.00 per hour
    Our client in Nisku is in urgent need of an amazing CNC Machinist, if have been seeking a great company to work for this is your opportunity to get in with a great company and hit the ground running. If you are reliable and a quick learner who likes to evolve with changing demands of the industry then this position is for you. We are actively seeking a CNC machinist who considers themselves a high-level candidate who enjoys being a valued team player, strives for continuous learning, and is experienced in a manufacturing shop. The shop is located south of Edmonton in the Nisku area. The environment is laid back and encouraging with a high-performing team. They are looking for someone who has a great positive attitude, willingness to learn, and a strong work ethic. You will be someone with a strong understanding of tool-making principles, able to work with minimal supervision, and with good organization, lastly, you have great attention to detail and take good pride in the work that you do. If this is something you believe would be a good fit for, then read on and apply now! Shifts: 7 am to 3.30 pm and 3.30 to 2 AM Ok ( 4 on days and 8 at night).*Please note that preference will be given to those who are able to start with 1 week's notice. AdvantagesPermanent opportunityGain meaningful experienceComprehensive Benefits PackageCompetitive wage based on experience $26-$36 ( $ 2.25-night shift premium and a $5.00 premium for operating 2 machines simultaneously)Employee BenefitsAutonomy within the roleWorking with an energetic, positive, and diverse teamOpportunity for someone to be innovative and obtain real growth within a solid teamResponsibilities3-5 years strong CNC machining background and willing to learnWork with Weingarten rotor milling machineHandling long cranes and long bars up to 300 inches long.Handling measuring toolsNo programming involved, just load and unload parts and perform machining Setup of machines through the use of proper toolsOperate machine with proper guarding in placeKeep the machine and tools in a good working order Inspects work visually and with appropriate measuring instrumentsEnsures documentation and records are accurately maintainedParticipates in continual improvement through innovation and initiatives to improve safety, productivity, profitability, and efficiencyFollows all policies and procedures as detailed in-process documents, immediately brings to the attention of the Supervisor any discrepancies or opportunities for improvementMaintains a clean and organized work area at all timesQualifications3-5 Years experience with CNC & mill,Must be able to complete a physical strength test and pre-employment testing prior to being on-siteMust have a reliable vehicle Ability to competently perform on the CNC equipment Ability to measure in both Imperial and Metric systems of measurementHave a thorough knowledge of machining methods, techniques, and related equipmentKnowledge of fits and tolerancesMust be able to read and interpret drawings and specificationsMust be able to manage multiple tasks and priorities and easily adapt to changing situations.Must have high attention to detail.Ability to safely operate a tow motor and crane with required training and licenseBasic knowledge of OSHA/OHSA regulations and safety standardsSummaryIf you think you could be exactly who we are looking for, please reach out directly to us today! This position will not be available for long!We thank all applicants for applying. Only those who are qualified will be contacted for an interview.Please note that due to the COVID-19 government regulations in place our offices are temporarily closed.However, please apply via this application link alternatively you can email Moumen.etbail@randstad.ca or julia.novitchkova@randstad.caRegister on our website at Randstad.caLooking forward to hearing from you!Regards,Moumen Etbail and Julia NotvitchkovaRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Our client in Nisku is in urgent need of an amazing CNC Machinist, if have been seeking a great company to work for this is your opportunity to get in with a great company and hit the ground running. If you are reliable and a quick learner who likes to evolve with changing demands of the industry then this position is for you. We are actively seeking a CNC machinist who considers themselves a high-level candidate who enjoys being a valued team player, strives for continuous learning, and is experienced in a manufacturing shop. The shop is located south of Edmonton in the Nisku area. The environment is laid back and encouraging with a high-performing team. They are looking for someone who has a great positive attitude, willingness to learn, and a strong work ethic. You will be someone with a strong understanding of tool-making principles, able to work with minimal supervision, and with good organization, lastly, you have great attention to detail and take good pride in the work that you do. If this is something you believe would be a good fit for, then read on and apply now! Shifts: 7 am to 3.30 pm and 3.30 to 2 AM Ok ( 4 on days and 8 at night).*Please note that preference will be given to those who are able to start with 1 week's notice. AdvantagesPermanent opportunityGain meaningful experienceComprehensive Benefits PackageCompetitive wage based on experience $26-$36 ( $ 2.25-night shift premium and a $5.00 premium for operating 2 machines simultaneously)Employee BenefitsAutonomy within the roleWorking with an energetic, positive, and diverse teamOpportunity for someone to be innovative and obtain real growth within a solid teamResponsibilities3-5 years strong CNC machining background and willing to learnWork with Weingarten rotor milling machineHandling long cranes and long bars up to 300 inches long.Handling measuring toolsNo programming involved, just load and unload parts and perform machining Setup of machines through the use of proper toolsOperate machine with proper guarding in placeKeep the machine and tools in a good working order Inspects work visually and with appropriate measuring instrumentsEnsures documentation and records are accurately maintainedParticipates in continual improvement through innovation and initiatives to improve safety, productivity, profitability, and efficiencyFollows all policies and procedures as detailed in-process documents, immediately brings to the attention of the Supervisor any discrepancies or opportunities for improvementMaintains a clean and organized work area at all timesQualifications3-5 Years experience with CNC & mill,Must be able to complete a physical strength test and pre-employment testing prior to being on-siteMust have a reliable vehicle Ability to competently perform on the CNC equipment Ability to measure in both Imperial and Metric systems of measurementHave a thorough knowledge of machining methods, techniques, and related equipmentKnowledge of fits and tolerancesMust be able to read and interpret drawings and specificationsMust be able to manage multiple tasks and priorities and easily adapt to changing situations.Must have high attention to detail.Ability to safely operate a tow motor and crane with required training and licenseBasic knowledge of OSHA/OHSA regulations and safety standardsSummaryIf you think you could be exactly who we are looking for, please reach out directly to us today! This position will not be available for long!We thank all applicants for applying. Only those who are qualified will be contacted for an interview.Please note that due to the COVID-19 government regulations in place our offices are temporarily closed.However, please apply via this application link alternatively you can email Moumen.etbail@randstad.ca or julia.novitchkova@randstad.caRegister on our website at Randstad.caLooking forward to hearing from you!Regards,Moumen Etbail and Julia NotvitchkovaRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

It looks like you want to switch your language. This will reset your filters on your current job search.