19 Permanent Engineering jobs found in Pune, Maharashtra

As the Mechanical Lead, you will balance hands-on design with strategic leadership. You will be responsible for ensuring high-quality engineering output—from initial concept through to production—within a highly regulated and innovative environment.Key Highlights of the RoleLead & Mentor: Directly manage and develop a team of mechanical engineers, fostering a culture of technical excellence.Technical Authority: Drive concept development and oversee design

1. Job Identification Job Title / Designation : JS1 Requesting Department : M.E Grade : JS1 Work Location : Oragadam Industrial, Vaipoor, Chennai3. Position Details3.1. Education: Diploma, Graduation, post-graduation (Specialization: Mechanical) 3.2. Experience Detailsa) Total Experience: 5-6 Years b) Relevant Experience: 2-3 Years3.3. Preferred Age Group: 23-30 Years3.4. Preferred Gender: Male3.5. Shift : General 3.6. 9 Hours work Monday to Saturday4.

. Qualifications and Requirements:1. Bachelo degree in Mechanical Engineering or related field.2. 2-5 years of experience in oil &gas equipment design.3. Strong knowledge of relevant codes, standards, and regulations.4. Experience with design software such as PV-Elite, AutoCAD, SolidWorks, etc.5. Strong communication and leadership skills.6. Excellent attention to detail and problem-solving abilities.experience8

Create 3D models, assemblies, and layouts using SolidWorksDevelop 2D manufacturing drawings with GD&T, tolerances, and annotationsDesign mechanical components, weldments, sheet metal parts, and assembliesPrepare BOMs and support cost optimization and manufacturabilityModify and optimize existing designs based on feedback and testingCoordinate with electrical, controls, and manufacturing teamsEnsure designs comply with DFM/DFA principles and industry standa

Must Have Specialist in Teamcenter PLM and Active Workspace (AWC) configuration andcustomizationExperience in Teamcenter 11.x+ and AWC 5.x+ implementationExperience in ITK customizationExperience in configuring data model with BMIDEExperience in working with SOA servicesExperience in developing interfaces with TeamcenterExperience in Teamcenter Part Management, BoM Management, ChangeManagement, Mfg BoM Management, Service BoM Management and DocumentManagem

Major responsibilities: ● RCA for Inhouse & field rejection. ● Attending customer complaints with customer QA and preparing appropriate CAPA reports. ● Implementing corrective actions to avoid warranty failure.  Managerial Skills and Experience: ● Good written and verbal communication skills. ● Ability to work with a cross-functional team. ● Sense of ownership and urgency when working in the company.  Experience: ● 6-8 years’ experience in Process Setup fo

Job PurposeThe Engineer – Shot Blasting & Paint Shop is responsible for supervising surface preparation and painting activities for batching plant components. This includes operating and maintaining shot blasting machines, monitoring primer and finish paint application, ensuring quality and safety compliance, and maintaining productivity across paint booths and drying areas.Key ResponsibilitiesSurface Preparation & Painting Operations:Supervise shot blasti

Key Responsibilities of the QSE1. Review of Supplier Documentation (70% of Time)Review pre-verification documents such as SMDL (Supplier Master Document List), ITP (Inspection and Test Plan), and Procedures received from the Supplier.Review verification documents against requirements from the PO (Purchase Order), Project/Client specifications, Material specifications, product specific requirements,and applicable codes & standards.Create a COM document in S

Production Production Planning and Supervision of Production Lines. Production with effective efficiency achievements as per the targets.Manpower Planning allocation on Production Lines. All 3 Shift working in Rotation. Cultured with Discipline and 5 S working. Technical Exposure and working with Tube Bending Machines. Knowledge and working on Welding and Brazing processes.experience9

Job Description:A designer should have a strong foundation in core design principles and a proven ability to effectively present and justify their work. An engineering background is highlyvaluable, as it helps bridge creativity with technical execution, ensuring concepts are both innovative and feasible. This combination enables better understanding of designexecution, practical constraints, and efficient handling of diverse projects across different domai

3. PRINCIPAL ACCOUNTABILITIES(List the responsibilities/duties associated with the job and the major activities associated with each responsibility).AccountabilitiesMajor Activities% of TimeEnsure compliance to Contract for the project scopeDetermine Project risks and potential deviations related to contract and address the same to ensure compliance Participate in Contract review and ensure compliance to contract for design engineering scope during projec

Key ResponsibilitiesCreate 3D models, assemblies, and layouts using SolidWorksDevelop 2D manufacturing drawings with GD&T, tolerances, and annotationsDesign mechanical components, weldments, sheet metal parts, and assembliesPrepare BOMs and support cost optimization and manufacturabilityModify and optimize existing designs based on feedback and testingCoordinate with electrical, controls, and manufacturing teamsEnsure designs comply with DFM/DFA principles

Job DescriptionSupplier Development Engineer, MetalsAbout the Position:Title : Supplier Development Engineer, MetalsReports to : GM - Supplier Development, IndiaLocation : Sanand / PuneGenie sets the standard by which other lifts are judged. Simply put, we build a better lift. Our innovative designsand reliable products have made Genie a world leader in the production of material lifts, portable aerial workplatforms, scissor lifts, and self-propelled teles

Must Have Specialist in Teamcenter PLM and Active Workspace (AWC) configuration andcustomizationExperience in Teamcenter 11.x+ and AWC 5.x+ implementationExperience in ITK customizationExperience in configuring data model with BMIDEExperience in working with SOA servicesExperience in developing interfaces with TeamcenterExperience in Teamcenter Part Management, BoM Management, ChangeManagement, Mfg BoM Management, Service BoM Management and DocumentManagem

JOB DESCRIPTION Position TitleStructural Senior EngineerDivision / DepartmentStructural Analysis/ StructuresLocationPuneDate (written on)Feb 2024  JOB PURPOSETo manage the assigned structural engineering scope in a project as per schedule with requisite quality. COMPANY OVERVIEW OneSubsea is a division of Schlumberger Limited, a multinational oilfield services company. OneSubsea specializes in providing integrated solutions, products, systems, and services

Key Responsibilities: 1. Designing Equipment such Pressure Vessels, Heat Exchangers, Compressors Packages, Piping Spool, Oil and Water consoles. 2. Reviewing codes, standards, and customer specifications. 3. Reviewing drawings and design calculations. 4. Preparation of design inputs, bought-out items & paint data sheet. 5. Validating various design software. 6. Communication with customers for approval of engineering documents. 7. Preparation and updating

CSSD Technician - Full TimeWe are seeking a highly skilled and dedicated CSSD Technician to join our healthcare team in Pune City, Maharashtra. This is a full-time position for an experienced professional responsible for ensuring the highest standards of sterilization and infection control within the Central Sterile Supply Department.Responsibilities:Perform sterilizer validation processes to ensure the efficacy of sterilization equipment.Operate and maint

Bachelor’s or Master’s degree in Mechanical, Chemical, or SystemsEngineering (Ph.D. preferred). Minimum 15 years of progressive engineering experience, including atleast 5 years in a leadership capacity. Proven track record in model-based design (MATLAB/Simulink, SysML, orequivalent) and 3D modeling (SolidWorks, CATIA, or similar). Hands-on experience in manufacturing, system integration, and productscale-up—from pilot to commercial deployment. Strong

Working Conditions:This is on role opportunityThis role requires working six (6) days a weekThe includes evenings and weekends working to meet customer demands, as we operate 24/7 with rotational shifts and weekly offsExperience in any technical product service/troubleshooting  Candidates must have troubleshooting experience, strong communication skills, and preferably basic knowledge of MS Office applications (Word, Excel, PowerPoint).Excellent communicat