5 jobs found for engineering

filter3
clear all
    • dudley, west midlands
    • permanent
    • £25,000 - £32,000 per year
    • full-time
    TechnicianI am currently recruiting for a Technician on a permanent basis with a leading mould toolmakers and plastic injection moulding business.This position is based in Dudley working double day shifts, reporting to the technical supervisor!43 hours per week: 39 + 4 additional hours at Time and a half!ResponsibilitiesTo effectively and safely carry out tool changes in the injection moulding areasTo ensure injection moulding processes can achieve targeted scrap and efficiency levels, on new and existing products.Ensure that all required procedures in line with IATF16949 requirements are strictly followed.To liaise with the Technical Supervisor to confirm planned tool changes within the relevant machines.To ensure that before the end of the running process, equipment has been kitted ready for the change-over.To ensure where required that tools are pre-warmed (both water and hot runners) to reduce tool change downtime.Paperwork or quality systems documentation is prepared before tool changeRun end shift reportsFit new tool into machine safely/ensure that the water circuits, hot runners are connected correctly.Product testing- leakage, air flow, flatness and any other specific validation testingComplete a shift hand-over log in conjunction with the Technical Supervisor/ Shift coordinator, maximizing the level of information required for success.Ensure that all Tool Room and Maintenance requests are fully completed and issued to the relevant department.Assist in the creation of SSOW (Safe Systems of Work) and implement these as part of daily routine.ExperienceFirst tier automotive experience within an injection moulding businessExperience of procedure adherence and completion of documentationTS16949 experience/knowledgeIMT Level 1 and 2 and 3 QualificationsDesirable attainmentsNVQ 2 injection mouldingSpecific experience on Engel and Krauss Maffei machinesIMT Level 3 qualificationConversant with Robots Wittman, ATM, Krauss integratedInterested? Please apply ASAP!Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    TechnicianI am currently recruiting for a Technician on a permanent basis with a leading mould toolmakers and plastic injection moulding business.This position is based in Dudley working double day shifts, reporting to the technical supervisor!43 hours per week: 39 + 4 additional hours at Time and a half!ResponsibilitiesTo effectively and safely carry out tool changes in the injection moulding areasTo ensure injection moulding processes can achieve targeted scrap and efficiency levels, on new and existing products.Ensure that all required procedures in line with IATF16949 requirements are strictly followed.To liaise with the Technical Supervisor to confirm planned tool changes within the relevant machines.To ensure that before the end of the running process, equipment has been kitted ready for the change-over.To ensure where required that tools are pre-warmed (both water and hot runners) to reduce tool change downtime.Paperwork or quality systems documentation is prepared before tool changeRun end shift reportsFit new tool into machine safely/ensure that the water circuits, hot runners are connected correctly.Product testing- leakage, air flow, flatness and any other specific validation testingComplete a shift hand-over log in conjunction with the Technical Supervisor/ Shift coordinator, maximizing the level of information required for success.Ensure that all Tool Room and Maintenance requests are fully completed and issued to the relevant department.Assist in the creation of SSOW (Safe Systems of Work) and implement these as part of daily routine.ExperienceFirst tier automotive experience within an injection moulding businessExperience of procedure adherence and completion of documentationTS16949 experience/knowledgeIMT Level 1 and 2 and 3 QualificationsDesirable attainmentsNVQ 2 injection mouldingSpecific experience on Engel and Krauss Maffei machinesIMT Level 3 qualificationConversant with Robots Wittman, ATM, Krauss integratedInterested? Please apply ASAP!Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    • farnborough, hampshire
    • temporary
    • £11.00 per hour
    • full-time
    Are you a skilled test tecnician looking for a new short term role? We are recruiting a test technician to support mechanical testing for a 2 month period. If this is of interest please read on!The role will involve applying a wide range of practical electronic and mechanical skills to support RDT's development team. This will include supporting the development team in; building/maintaining prototypes, test jig design and build, reviewing and generating draft assembly documentation for both new and existing products, performing PCB component modifications, running test protocols, writing reports, and managing development lab tools and measurement equipment. Benefits:Access to Randstad Benefits App which includes high street discounts and moreFree ParkingClean Working EnvironmentCompetitive PayWorking Hours and Pay Rate:Monday to Friday (9am-5pm)37.5 hours per week (30 minutes unpaid break per day)PRIME RESPONSIBILITIES:Supporting the design team with practical hands on skillsTesting tasks required to progress the development of new products, in particular electronic and mechanical sub-system V&V testing.Creating test reports for inclusion in regulatory submissions. KEY TASKS/DUTIES:Building prototypes and test jigs as directed by design team Performing tests as directed by design team.Producing test reports for testing performed. EssentialHND or NVQ level 5 or above in electronics or related subject.Practical/demonstrable surface mount soldering and PCB rework skills.Practical/demonstrable model making skills.PC literate, experienced in Word/Excel etc.Good level of communication and report writing skills Well motivated and pro-active with an ability to learn and apply observed practices.Good problem-solving skills with a good eye for detail DesirableExperience with environmental and climatic test protocols Experience of working within an organization operating an engineering quality system and meeting regulatory requirements.Interpersonal SkillsStrong interpersonal, communication, and attention to detailAbility to work as a part of a team, or individually while using own initiative If you think you tick all the boxes, why not click apply today!
    Are you a skilled test tecnician looking for a new short term role? We are recruiting a test technician to support mechanical testing for a 2 month period. If this is of interest please read on!The role will involve applying a wide range of practical electronic and mechanical skills to support RDT's development team. This will include supporting the development team in; building/maintaining prototypes, test jig design and build, reviewing and generating draft assembly documentation for both new and existing products, performing PCB component modifications, running test protocols, writing reports, and managing development lab tools and measurement equipment. Benefits:Access to Randstad Benefits App which includes high street discounts and moreFree ParkingClean Working EnvironmentCompetitive PayWorking Hours and Pay Rate:Monday to Friday (9am-5pm)37.5 hours per week (30 minutes unpaid break per day)PRIME RESPONSIBILITIES:Supporting the design team with practical hands on skillsTesting tasks required to progress the development of new products, in particular electronic and mechanical sub-system V&V testing.Creating test reports for inclusion in regulatory submissions. KEY TASKS/DUTIES:Building prototypes and test jigs as directed by design team Performing tests as directed by design team.Producing test reports for testing performed. EssentialHND or NVQ level 5 or above in electronics or related subject.Practical/demonstrable surface mount soldering and PCB rework skills.Practical/demonstrable model making skills.PC literate, experienced in Word/Excel etc.Good level of communication and report writing skills Well motivated and pro-active with an ability to learn and apply observed practices.Good problem-solving skills with a good eye for detail DesirableExperience with environmental and climatic test protocols Experience of working within an organization operating an engineering quality system and meeting regulatory requirements.Interpersonal SkillsStrong interpersonal, communication, and attention to detailAbility to work as a part of a team, or individually while using own initiative If you think you tick all the boxes, why not click apply today!
    • newport, newport
    • contract
    • £14 per year
    • full-time
    Are you experienced in quality calibration? Are you interested in joining one of the UK's largest engineering companies? If so, this is a great opportunity for you! As a calibration technician your responsibilites will be as follows: Create and to verify calibration data sheets, for technical content and accuracy.Develop calibration procedures to meet the needs of the company.Complete all documentation associated with the position accurately and effectively while maintain the Quality Document Inspection (QDI) and Process Verification Inspection (PVI) ensuring a minimal discrepancy rate.Assist Quality Department in both investigation and analysis.Perform daily inspections/audits of shop floor calibrated tooling equipment to ensure compliance.Manage the master controlled measuring equipment to the UKAS National/International standard.Test, measure and record all site Orifice plates to the EUETS standard.Perform scheduled calibration on required items with minimal disruption to production.Control all calibrated equipment through registers, check sheets and sign off sheets.Carry out calibration on Items identified within the remit of the Calibration Technician.Organise out going Calibration on designated items.Purchase of new Calibration items and equipment, through the company request system.Ensure all documentation from externally calibrated or new equipment is correct and logged into S.A.P. /Register efficiently and accurately If you would like any more information, please give Connor a call on 01489 560132 Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    Are you experienced in quality calibration? Are you interested in joining one of the UK's largest engineering companies? If so, this is a great opportunity for you! As a calibration technician your responsibilites will be as follows: Create and to verify calibration data sheets, for technical content and accuracy.Develop calibration procedures to meet the needs of the company.Complete all documentation associated with the position accurately and effectively while maintain the Quality Document Inspection (QDI) and Process Verification Inspection (PVI) ensuring a minimal discrepancy rate.Assist Quality Department in both investigation and analysis.Perform daily inspections/audits of shop floor calibrated tooling equipment to ensure compliance.Manage the master controlled measuring equipment to the UKAS National/International standard.Test, measure and record all site Orifice plates to the EUETS standard.Perform scheduled calibration on required items with minimal disruption to production.Control all calibrated equipment through registers, check sheets and sign off sheets.Carry out calibration on Items identified within the remit of the Calibration Technician.Organise out going Calibration on designated items.Purchase of new Calibration items and equipment, through the company request system.Ensure all documentation from externally calibrated or new equipment is correct and logged into S.A.P. /Register efficiently and accurately If you would like any more information, please give Connor a call on 01489 560132 Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    • birmingham, west midlands
    • permanent
    • £25,000 - £26,000 per year
    • full-time
    Randstad engineering is recruiting for a Test Laboratory Technician to work on a permanent basis for an existing client based near Birmingham. The role will suit experienced test laboratory technicians who have knowledge of material testing or testing machines and as have experience of UKAS. The role in brief:Adhere to quality / company procedures and continuous improvement within the Company.Organising own time and resources (information, tools, materials, suppliers, customers) to complete tasks.This role will involve assisting the senior Test Lab Engineer on the generation of quotations, liaising with customers to understand their requirements and discussing opportunities with potential new customers.Providing support to suppliers, customers and internal staff.Ensuring maintenance of tools, equipment and working areas (tools put away, equipment well maintained, no rubbish, correct use of tools and equipment). Skills & Experience:Essential:Interpreting customer testing requirementsKnowledge of material testing / test machinesExperience of working to International quality standardsKnowledge and experience of UKASUnderstands the use and application of uncertainty calculationsComplete audits in line with existing Quality Management Systems (internal and by external bodies)Use of mechanical measuring equipment and hand toolsDesirable:Familiar with a company offering bespoke/varied productsUnderstanding of servo hydraulicsOperation of general workshop equipment If you feel you fit the requirements please make an application at your earliest convenience. Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    Randstad engineering is recruiting for a Test Laboratory Technician to work on a permanent basis for an existing client based near Birmingham. The role will suit experienced test laboratory technicians who have knowledge of material testing or testing machines and as have experience of UKAS. The role in brief:Adhere to quality / company procedures and continuous improvement within the Company.Organising own time and resources (information, tools, materials, suppliers, customers) to complete tasks.This role will involve assisting the senior Test Lab Engineer on the generation of quotations, liaising with customers to understand their requirements and discussing opportunities with potential new customers.Providing support to suppliers, customers and internal staff.Ensuring maintenance of tools, equipment and working areas (tools put away, equipment well maintained, no rubbish, correct use of tools and equipment). Skills & Experience:Essential:Interpreting customer testing requirementsKnowledge of material testing / test machinesExperience of working to International quality standardsKnowledge and experience of UKASUnderstands the use and application of uncertainty calculationsComplete audits in line with existing Quality Management Systems (internal and by external bodies)Use of mechanical measuring equipment and hand toolsDesirable:Familiar with a company offering bespoke/varied productsUnderstanding of servo hydraulicsOperation of general workshop equipment If you feel you fit the requirements please make an application at your earliest convenience. Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    • chippenham, wiltshire
    • permanent
    • £42,000 - £42,100 per year
    • full-time
    Extrusion Technical OperatorChippenhamFull Time, Permanent3 on 3 off- days and nights (12 hour shifts)£42,011.93 Per Annum + Overtime at x1.5 and x2 + 23 Shifts Holiday + Benefits My client, a globally recognised manufacturer, is looking for multiple extrusion technical operators to join their shift production team. The company has been established in the area for many decades and continues to offer a rewarding position, with skills based development, job security and earning potential. Experience/Knowledge:Essential: Previous experience/working knowledge of; Tool changing, line changing, optimising extrusion line process, maintaining the parameters of the lines, changing specifications of lines. I.e temperature change, speed change etcWorking as part of a production team, handing machinery over to operators and assisting with any arising obstacles. A willingness to train and develop your skill set for the role on offer. Responsibilities: Line changing, specification changes, optimising the extrusion line processLiaising with shift managers and other production staff to ensure maximum machinery efficiency Enter and maintain all shop floor data Ensuring compliance with health and safety. This is a great opportunity to join a growing business that can offer a career, substantial progression and earning potential. Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    Extrusion Technical OperatorChippenhamFull Time, Permanent3 on 3 off- days and nights (12 hour shifts)£42,011.93 Per Annum + Overtime at x1.5 and x2 + 23 Shifts Holiday + Benefits My client, a globally recognised manufacturer, is looking for multiple extrusion technical operators to join their shift production team. The company has been established in the area for many decades and continues to offer a rewarding position, with skills based development, job security and earning potential. Experience/Knowledge:Essential: Previous experience/working knowledge of; Tool changing, line changing, optimising extrusion line process, maintaining the parameters of the lines, changing specifications of lines. I.e temperature change, speed change etcWorking as part of a production team, handing machinery over to operators and assisting with any arising obstacles. A willingness to train and develop your skill set for the role on offer. Responsibilities: Line changing, specification changes, optimising the extrusion line processLiaising with shift managers and other production staff to ensure maximum machinery efficiency Enter and maintain all shop floor data Ensuring compliance with health and safety. This is a great opportunity to join a growing business that can offer a career, substantial progression and earning potential. Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

It looks like you want to switch your language. This will reset your filters on your current job search.